Flow injection-chemical vapor generation atomic fluorescence spectrometry hyphenated system for organic mercury determination: A step forward

Monomethylmercury and ethylmercury were determined on line using flow injection-chemical vapor generation atomic fluorescence spectrometry without neither requiring a pre-treatment with chemical oxidants, nor UV/MW additional post column interface, nor organic solvents, nor complexing agents, such as cysteine. Inorganic mercury, monomethylmercury and ethylmercury were detected by atomic fluorescence spectrometry in an Ar/H₂ miniaturized flame after sodium borohydride reduction to Hg⁰, monomethylmercury hydride and ethylmercury hydride, respectively. The effect of mercury complexing agent such as cysteine, ethylendiaminotetracetic acid and HCl with respect to water and Ar/H₂ microflame was investigated.The behavior of inorganic mercury, monomethylmercury and ethylmercury and their cysteine-complexes was also studied by continuous flow-chemical vapor generation atomic fluorescence spectrometry in order to characterize the reduction reaction with tetrahydroborate. When complexed with cysteine, inorganic mercury, monomethylmercury and ethylmercury cannot be separately quantified varying tetrahydroborate concentration due to a lack of selectivity, and their speciation requires a pre-separation stage (e.g. a chromatographic separation). If not complexed with cysteine, monomethylmercury and ethylmercury cannot be separated, as well, but their sum can be quantified separately with respect to inorganic mercury choosing a suitable concentration of tetrahydroborate (e.g. 10^? 5 mol L^? 1), thus allowing the organic/inorganic mercury speciation.The detection limits of the flow injection-chemical vapor generation atomic fluorescence spectrometry method were about 45 nmol L^? 1 (as mercury) for all the species considered, a relative standard deviation ranging between 1.8 and 2.9% and a linear dynamic range between 0.1 and 5 μmol L^? 1 were obtained. Recoveries of monomethylmercury and ethylmercury with respect to inorganic mercury were never less than 91%. Flow injection-chemical vapor generation atomic fluorescence spectrometry method was validated by analyzing the TORT-1 certificate reference material, which contains only monomethylmercury, and obtaining 83 ± 5% of monomethylmercury recovered, respectively. This method was also applied to the determination of monomethylmercury in saliva samples.     

Bis(tetraethylammonium) tetrabromocobaltate(II) and bis(tetrabutylammonium) tetrabromomanganate(II): structure and magnetic properties

The crystal structures of tetrabromocobaltate(II) and tetrabromomanganate(II) salts of general formula [(C₂H₅)₄N]₂[CoBr₄] (1) and [(C₄H₉)₄N]₂[MnBr₄] (2) were determined. The manganese and cobalt cations are four-coordinated by bromide anions and they adopt a slightly distorted tetrahedral coordination. In the structure of both compounds there are neither hydrogen bonds nor any unusual short-range intermolecular interactions. Magnetic measurements of the powdered samples gave negative values of the Weiss constants equal to −4.9 and −1.1 K for (1) and (2), respectively, which suggest antiferromagnetic interactions to be transferred within the crystal lattice.     

A HTS Assay for the Detection of Organophosphorus Nerve Agent Scavengers

A new pro‐fluorescent probe aimed at a HTS assay of scavengers is able to selectively and efficiently cleave the P? S bond of organophosphorus nerve agents and by this provides non‐toxic phosphonic acid has been designed and synthesised. The previously described pro‐fluorescent probes were based on a conventional activated P? Oaryl bond cleavage, whereas our approach uses a self‐immolative linker strategy that allows the detection of phosphonothioase activity with respect to a non‐activated P? Salkyl bond. Further, we have also developed and optimised a high‐throughput screening assay for the selection of decontaminants (chemical or biochemical scavengers) that could efficiently hydrolyse highly toxic V ‐type nerve agents. A preliminary screening, realised on a small α‐nucleophile library, allowed us to identify some preliminary “hits”, among which pyridinealdoximes, α‐oxo oximes, hydroxamic acids and, less active but more original, amidoximes were the most promising. Their selective phosphonothioase activity has been further confirmed by using PhX as the substrate, and thus they offer new perspectives for the synthesis of more potent V nerve agent scavengers.     

Incommensurate magnetism in FeAs strips: neutron scattering from CaFe(4)As(3)

Magnetism in the orthorhombic metal CaFe(4)As(3) was examined through neutron diffraction for powder and single crystalline samples. Incommensurate [q(m) ≈ (0.37-0.39) × b*] and predominantly longitudinally (|| b) modulated order develops through a 2nd order phase transition at TN = 89.63(6) K with a 3D Heisenberg-like critical exponent β = 0.365(6). A 1st order transition at T2 = 25.6(9) K is associated with the development of a transverse component, locking q(m) to 0.375(2)b*, and increasing the moments from 2.1(1) to 2.2(3) μ B for Fe2+ and from 1.3(3) to 2.4(4) μB for Fe+. The ab initio Fermi surface is consistent with a nesting instability in cross-linked FeAs strips.     

Synthesis of β-amino-α-trifluoromethyl alcohols and their applications in organic synthesis

A comprehensive overview on methods applied for syntheses of β-amino-α-trifluoromethyl alcohols, including stereocontrolled variants, is presented. In addition, reported cases of the exploration of β-amino-α-trifluoromethyl alcohols for the preparation of trifluoromethylated peptidomimetics and other biologically active, fluorinated compounds are discussed. Attractive opportunities for their applications as organocatalysts are also presented.     

Determination of methylmercury in marine sediment samples: Method validation and occurrence data

The determination of methylmercury (MeHg) in sediment samples is a difficult task due to the extremely low MeHg/THg (total mercury) ratio and species interconversion. Here, we present the method validation of a cost-effective fit-for-purpose analytical procedure for the measurement of MeHg in sediments, which is based on aqueous phase ethylation, followed by purge and trap and hyphenated gas chromatography–pyrolysis–atomic fluorescence spectrometry (GC–Py–AFS) separation and detection. Four different extraction techniques, namely acid and alkaline leaching followed by solvent extraction and evaporation, microwave-assisted extraction with 2-mercaptoethanol, and acid leaching, solvent extraction and back extraction into sodium thiosulfate, were examined regarding their potential to selectively extract MeHg from estuarine sediment IAEA-405 certified reference material (CRM). The procedure based on acid leaching with HNO₃/CuSO₄, solvent extraction and back extraction into Na₂S₂O₃ yielded the highest extraction recovery, i.e., 94 ± 3% and offered the possibility to perform the extraction of a large number of samples in a short time, by eliminating the evaporation step. The artifact formation of MeHg was evaluated by high performance liquid chromatography coupled to inductively coupled plasma mass spectrometry (HPLC–ICP–MS), using isotopically enriched Me²⁰¹Hg and ²⁰²Hg and it was found to be nonexistent. A full validation approach in line with ISO 17025 and Eurachem guidelines was followed. With this in mind, blanks, selectivity, working range (1–800 pg), linearity (0.9995), recovery (94–96%), repeatability (3%), intermediate precision (4%), limit of detection (0.45 pg) and limit of quantification (0.85 pg) were systematically assessed with CRM IAEA-405. The uncertainty budget was calculated and the major contribution to the combined uncertainty (16.24%, k = 2) was found to arise from the uncertainty associated with recovery (74.1%). Demonstration of traceability of measurement results is also presented. The validated measurement procedure was applied to the determination of MeHg incurred in sediments from a highly polluted and scarcely studied area in the Caribbean region.     

Electrochemical sensors and biosensors based on redox polymer/carbon nanotube modified electrodes: A review

The aim of this review is to present the contributions to the development of electrochemical sensors and biosensors based on polyphenazine or polytriphenylmethane redox polymers together with carbon nanotubes (CNT) during recent years. Phenazine polymers have been widely used in analytical applications due to their inherent charge transport properties and electrocatalytic effects. At the same time, since the first report on a CNT-based sensor, their application in the electroanalytical chemistry field has demonstrated that the unique structure and properties of CNT are ideal for the design of electrochemical (bio)sensors. We describe here that the specific combination of phenazine/triphenylmethane polymers with CNT leads to an improved performance of the resulting sensing devices, because of their complementary electrical, electrochemical and mechanical properties, and also due to synergistic effects. The preparation of polymer/CNT modified electrodes will be presented together with their electrochemical and surface characterization, with emphasis on the contribution of each component on the overall properties of the modified electrodes. Their importance in analytical chemistry is demonstrated by the numerous applications based on polymer/CNT-driven electrocatalytic effects, and their analytical performance as (bio) sensors is discussed.     

Mechanism of Thyroxine Deiodination by Naphthyl‐Based Iodothyronine Deiodinase Mimics and the Halogen Bonding Role: A DFT Investigation

This paper deals with a systematic density functional theory (DFT) study aiming to unravel the mechanism of the thyroxine (T4) conversion into 3,3′,5‐triiodothyronine (rT3) by using different bio‐inspired naphthyl‐based models, which are able to reproduce the catalytic functions of the type‐3 deiodinase ID‐3. Such naphthalenes, having two selenols, two thiols, and a selenol–thiol pair in peri positions, which were previously synthesized and tested in their deiodinase activity, are able to remove iodine selectively from the inner ring of T4 to produce rT3. Calculations were performed including also an imidazole ring that, mimicking the role of the His residue, plays an essential role deprotonating the selenol/thiol moiety. For all the used complexes, the calculated potential energy surfaces show that the reaction proceeds via an intermediate, characterized by the presence of a X?I?C (X=Se, S) halogen bond, whose transformation into a subsequent intermediate in which the C?I bond is definitively cleaved and the incipient X?I bond is formed represents the rate‐determining step of the whole process. The calculated trend in the barrier heights of the corresponding transition states allows us to rationalize the experimentally observed superior deiodinase activity of the naphthyl‐based compound with two selenol groups. The role of the peri interactions between chalcogen atoms appears to be less prominent in determining the deiodination activity.