Quantum well shape modification using vacancy generation and rapid thermal annealing

The effect of rapid thermal annealing (RTA) on the shapes of GaAs/AlGaAs quantum wells (QWs) has been investigated by monitoring exciton energies using low temperature photoluminescence and photoluminescence excitation spectroscopies. After RTA, large changes in exciton energies were observed only in regions of the samples in which excess surface vacancies were generated, either by capping with a thin layer of SiO₂ or by low-energy ion implantation. These changes were interpreted as resulting from modifications of the shapes of the as-grown QWs from abrupt or square to gradual (rounded) due to enhanced interdiffusion of well/barrier atoms. For single QWs there was an increase in exciton energy whose magnitude depended on the width of the well, its distance from the surface of the wafer, the annealing temperature and the total number of surface vacancies available. From studies of coupled QWs, there was clear evidence of asymmetry in the heterostructure after RTA. Although both techniques of vacancy generation yield substantial QW shape modifications, the ion implantation technique has the advantages of being highly reproducible and of being compatible with any material system.     

Effects of coherence on the degree of polarization in a young interference pattern

Recent predictions concerning the relationship between the degree of polarization at a typical point of a Young interference pattern and the degree of coherence of the electromagnetic field at the pinholes are tested by a simple experiment. In particular, it is shown that light that is completely unpolarized at the pinholes can become partially polarized across the fringe pattern.     

Directionality of Gaussian Schell-model beams propagating in atmospheric turbulence

It is known that some partially coherent Gaussian Shell-model beams may generate, in free space, the same angular distribution of radiant intensity as a fully coherent laser beam. We show that this result also holds even if the beams propagate in atmospheric turbulence, irrespective of the particular model of turbulence used. The result is illustrated by an example.     

Effects of spatial coherence on near-field spectra

Expressions are derived for the spectrum of the field generated by a planar, homogeneous, secondary source of any spectral distribution and of any state of spatial coherence. It is shown that the state of coherence affects the contributions of the homogeneous as well as the evanescent waves of the emitted field. The near-field spectra are studied in detail. The analysis is illustrated by examples.     

XRD and EPR structural investigation of some zinc borate glasses doped with iron ions

Glasses in the system xFe₂O₃·(100?x) [45ZnO·55B₂O₃] (0≤x≤10 mol%) have been prepared by melting at 1200 °C and rapidly cooling at room temperature. The obtained samples were submitted to an additional thermal treatment at 570 °C for 12 h in order to relax the glass structure as well as to improve the local order. The as cast and heat treated samples were investigated using X-ray diffraction (XRD) and electron paramagnetic resonance (EPR) measurements. The XRD patterns of all the studied samples show their vitreous nature. Structural modifications occurring in the heat treated samples compared to the untreated ones have been pointed out. EPR spectra of untreated and heat treated samples revealed resonance absorptions centered at g≈2.0, g≈4.3 and g≈6.4. The compositional variation of the line intensity and linewidth of the absorptions from g≈4.3 and g≈2.0 have been interpreted in terms of the variation in the concentration of the Fe³⁺ ions and the interaction between the iron ions. The EPR spectra of the untreated samples containing 5 mol% Fe₂O₃ have been studied at different temperatures (110–290 K). The line intensity of the resonance signals decreases with increase in temperature whereas the linewidth is found to be independent of temperature. It was also found that the temperature variation of reciprocal line intensity obeys the Boltzmann law.     

Stokes beams formed by superposition of a completely unpolarized and a completely polarized Gaussian Schell-model beam

Analytic expressions and computed examples are given to elucidate the coherence and polarization properties of Stokes beams, i.e. beams formed by superposition of a completely unpolarized and a completely polarized electromagnetic Gaussian Schell-model beam. We found that superposition of such two beams cannot form a Stokes beam with a constant state of polarization on propagation. An additional constraint on the source plane parameters of the two Gaussian Schell-model beams is proposed. The resultant Stokes beam with a constant state of polarization on propagation is found to be a Gaussian Schell-model beam with the same variances as the two constituent Gaussian Schell-model beams. However, the modulus of the Gaussian intensity distributions across the source planes of these beams may be different.     

Intra-operative acoustic hemostasis of liver: production of a homogenate for effective treatment

Objective: We have shown that High-Intensity Focused Ultrasound (HIFU) can effectively control bleeding from injuries to solid organs such as liver, spleen, and lung. Achievement of hemostasis was augmented when a homogenate of tissue and blood was formed. The objective of this study was to investigate quantitatively the effect of homogenate production on HIFU application time for hemostasis. Possible mechanisms involved in homogenate production were also studied.Methods: Ten anesthetized rabbits had laparotomy and liver exposure. Liver incisions, 15-25 mm long and 3-4 mm deep, were made followed immediately by HIFU application. Two electrical powers of 80 and 100 W corresponding to focal acoustic intensities of 2264 and 2829 W/cm², respectively were used. Tissue and homogenate temperatures were measured. Smear and histological tissue sample analysis using light microscopy were performed.Results: In treatments with homogenate formation, hemostasis was achieved in 76 ± 1.3 s (Mean ± Standard Error Mean: SEM) at 80 W. In treatments without homogenate formation (at 80 W), hemostasis was achieved in 106 ± 0.87 s. At 100 W, hemostasis was achieved in 46 ± 0.3 s. The time required for homogenate formation, at 80 and 100 W were 60 ± 2.5 and 23 ± 0.3 s, respectively. The homogenate temperature was 83 °C (SEM 0.6 °C), and the non-homogenate tissue temperature at the treatment site was 60 °C (SEM 0.4 °C). The smear and histological analysis showed significant blood components and cellular debris in the homogenate, with some intact cells.Conclusion: The HIFU-induced homogenate of blood and tissue resulted in a statistically significant shorter HIFU application time for hemostasis. The incisions with homogenate had higher temperatures as compared to incisions without homogenate. Further studies of the correlation between homogenate formation and temperature must be done, as well as studies on the long-term effects of homogenate in achieving hemostasis.     

Influence of (phospho)lipases on properties of mica supported phospholipid layers

The effect of enzymes: lipase from Candida cylindracea (L_Cc), phospholipase A₂ from hog pancreas (PLA₂) and phospholipase C from Bacillus cereus (PLC) to modulate wetting properties of solid supported phospholipid bilayers was studied via advancing and receding contact angle measurements of water, formamide and diiodomethane, and calculation of the surface free energy and its components from van Oss et al. (LWAB) and contact angle hysteresis (CAH) approaches. Simultaneously, topography of the studied layers was determined by Atomic Force Microscopy (AFM). The investigated lipid bilayers were transferred on mica plates from subphase of pure water by means of Langmuir-Blodgett and Langmuir-Schaefer techniques. The investigated phospolipid layers were: saturated DPPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine), unsaturated DOPC (1,2-dioleoyl-sn-glycero-3-phosphocholine), and their mixture DPPC/DOPC. The obtained results revealed that the lipid membrane degradation by the enzymes caused increase in its surface free energy due to the amphiphilic hydrolysis products, which may accumulate in the lipid bilayer. In result activity of the enzymes may increase and then break down the bilayer structure takes place. It is likely that after dissolution of the hydrolysis reaction products in the bulk phase, patches of bare mica surface are accessible, which contribute to the apparent surface free energy changes. Comparison of AFM images and the free energy changes of the layers gives better insight into changes of their properties. The observed gradual increase in the layer surface free energy allows controlling of the hydrolysis process to obtain the surfaces of defined properties.     

Avoided level crossing μSR of organic free radicals

Several aspects of the ALC-μSR technique of muonated organic free radicals in liquids, including the effects of chemical dynamics and T₁-processes are discussed.     

Transition from a two-dimensional superfluid to a one-dimensional Mott insulator

A two-dimensional system of atoms in an anisotropic optical lattice is studied theoretically. If the system is finite in one direction, it is shown to exhibit a transition between a two-dimensional superfluid and a one-dimensional Mott insulating chain of superfluid tubes. Monte Carlo simulations are consistent with the expectation that the phase transition is of Kosterlitz-Thouless type. The effect of the transition on experimental time-of-flight images is discussed.