Synthesis and reactions of a poly(methacrylate) from an optically active amino alcohol

Synthesis and radical polymerization of a novel optically active methacrylate, (S)–2–tert–butoxycarbonylamino–3–phenylpropyl methacrylate (MA–F–BOC), were examined. MA–F–BOC was synthesized from methacrylic acid and N–protected (L)–phenylalaninol. Radical polymerization of MA–F–BOC quantitatively afforded the corresponding polymethacrylate with a relatively high molecular weight. Radical copolymerizations of MA–F–BOC were carried out with styrene and acrylamide to afford the copolymers. Radical polymerization of MA–F–BOC in the presence of n–butanethiol afforded the oligomers, whose degrees of polymerizations were 3.3–8.0. The BOC group was completely cloven with HBr to afford the corresponding optically active polymeric amine quantitatively. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 1981–1986, 1998     

Synthesis of [1]rotaxane via covalent bond formation and its unique fluorescent response by energy transfer in the presence of lithium ion

Although there have been a lot of reports on the synthesis and properties of [n]rotaxanes (mainly n = 2), only a few reports on the synthesis of [1]rotaxane has been published by V?gtle's group and others (see ref 5). Generally speaking, [1]rotaxane might be expected to exhibit properties different from other rotaxanes, because the rotor and the axle in the [1]rotaxane is bound covalently and closely. We report on a novel method to make [1]rotaxanes via covalent bond formation from a macrocyclic compound. That is, we first prepared a bicyclic compound from macrocycle and then proceeded to [1]rotaxane by aminolysis. This is the first synthetic example of preparation of [1]rotaxane via covalent bond formation, not utilizing weak interactions such as hydrogen bonding, charge transfer, via metal complexation, etc. This method might provide a powerful and new tool for construction of [1]rotaxane as a new supramolecular system. In addition, we investigated energy transfer from rotor to axle using [1]rotaxane that we prepared. Energy transfer occurred perfectly from the naphthalene ring of the rotor to the anthracene ring of the axle. We found also that only lithium ion among alkali ions can drastically enhance the fluorescence intensity. This finding could be applicable to ion-sensing systems, switching devices, and so on.     

Synthesis and properties of unsymmetrically extended π-electronic conjugation system of octaethylporphyrin(Ni)-dihexybithiophene-octaethylporphyrin(Pd) connected with diacetylene linkage

Orientational isomers of the diacetylene-group connected dihexybithiophene (DHBTh) derivatives have been synthesized, in which the different octaethylporphyrin (OEP(M); M=Ni or Pd) rings are attached at the ends. Reflecting the unsymmetrical structural feature, the peculiar electronic properties of the extended OEP(Ni)-DHBTh-OEP(Pd) system were observed.     

Quantitative monitoring of His and Asp phosphorylation in a bacterial signaling system by using Phos‐tag Magenta/Cyan fluorescent dyes

In the bacterial signaling mechanisms known as two‐component systems (TCSs), signals are generally conveyed by means of a His–Asp phosphorelay. Each system consists of a histidine kinase (HK) and its cognate response regulator. Because of the labile nature of phosphorylated His and Asp residues, few approaches are available that permit a quantitative analysis of their phosphorylation status. Here, we show that the Phos‐tag dye technology is suitable for the fluorescent detection of His‐ and Asp‐phosphorylated proteins separated by SDS‐PAGE. The dynamics of the His–Asp phosphorelay of recombinant EnvZ‐OmpR, a TCS derived from Escherichia coli, were examined by SDS‐PAGE followed by simple rapid staining with Phos‐tag Magenta fluorescent dye. The technique permitted not only the quantitative monitoring of the autophosphorylation reactions of EnvZ and OmpR in the presence of adenosine triphosphate (ATP) or acetyl phosphate, respectively, but also that of the phosphotransfer reaction from EnvZ to OmpR, which occurs within 1 min in the presence of ATP. Furthermore, we demonstrate profiling of waldiomycin, an HK inhibitor, by using the Phos‐tag Cyan gel staining. We believe that the Phos‐tag dye technology provides a simple and convenient fluorometric approach for screening of HK inhibitors that have potential as new antimicrobial agents.     

Polycondensations of hydroxycarboxylic acids derived from optically active aminoalcohols and acid anhydrides—syntheses of functional poly(ester-amide)s

Syntheses and polycondensations of optically active hydroxycarboxylic acids prepared from acid anhydrides and aminoalcohols were carried out. Novel polymers with M̄_n 9900–27,200 were obtained by the polycondensations of hydroxycaboxylic acids derived from maleic or succinic acid using 1.2 eq. of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC · HCl) in DMF (2M) at room temperature for 8 h in satisfactory yields. Meanwhile, a hydroxycarboxylic acid obtained from phthalic acid afforded no polymer but a phthalimide derivative. The radical additions of ethanethiol or mercaptoethanol with the polymers derived from maleic anhydride proceeded smoothly in satisfactory incorporation ratios (65–98%), respectively. The polymer obtained from succinic anhydride and 2-aminoethanol showed hydrolytic degradability. © 1997 John Wiley & Sons, Inc.     

Carpetlike dense‐layer formation in a polyelectrolyte brush at the air/water interface

A carpetlike dense‐layer formation between a hydrophobic layer and a polyelectrolyte brush layer has been found in the monolayers of an ionic amphiphilic diblock copolymer, poly(1,1‐diethylsilacyclobutane)_m‐block‐poly(methacrylic acid)_n, on a water surface by an X‐ray reflectivity technique. By detailed analysis, we have found that the hydrophilic layer under the water is not a simple layer but is divided into two layers, that is, a carpetlike dense methacrylic acid (MAA) layer near the hydrophobic layer and a polyelectrolyte brush layer. We have also confirmed that a well‐established polyelectrolyte brush is formed only for the m:n = 43:81 polymer monolayer: For m:n = 40:10 and m:n = 45:60 polymer monolayers, only a dense MAA layer is formed. This dense‐layer formation should be the origin of the interesting hydrophobic‐layer thickness variation previously reported; The hydrophobic‐layer thickness takes a minimum as a function of the hydrophilic chain length at any surface pressure studied. An overview of the data for three samples with different chain lengths (m:n = 40:10, 45:60, or 43:81) has shown that the thickness of this dense layer is 10–20 Å and is independent of the surface pressure and polymerization degree of poly(methacrylic acid) (PMAA) in the range studied. This dense‐layer formation is explained by the reasonable speculation that contact with PMAA is thermodynamically more stable than direct contact with water for the diethylsilacyclobutane (Et₂SB) layer on water. In this sense, the dense layer acts like a carpet for the hydrophobic Et₂SB layer, and a 10–20‐Å thickness could be a critical value for the carpet. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1921–1928, 2003     

Rapid determination of trace quantities of thallium in heat-resisting cobalt and nickel alloys by graphite furnace atomic absorption spectrometry

Summary A simple and rapid analytical method has been developed for the direct determination of trace quantities of thallium in nickel and cobalt-base heatresisting alloys by graphite furnace atomic absorption spectrometry. Hydrofluoric acid, sulphuric acid, and hydrogen peroxide were used for the dissolution of a wide variety of these alloys. The interferences of matrix elements and acids were eliminated. The absorbance of thallium is constant over a wide range of ashing temperatures. Synthetic standard solutions composed of nickel or cobalt matrix and thallium were used for calibration. The detection limit for thallium by this method is 0.2 ppm in the sample. Mechanisms of the interferences are discussed.

---

Schnelle Bestimmung von Thalliumspuren in hitzebeständigen Cobalt- und Nickellegierungen durch Atomabsorptions-Spektralphotometrie mit dem Graphitofen

Zusammenfassung Ein Verfahren zur AAS-Bestimmung von Thallium in verschiedenartigen Cobalt- und Nickellegierungen wird beschrieben. Zur Auflösung der Probe werden Flußsäure, Schwefelsäure und Wasserstoffperoxid verwendet. Störungen durch Matrixelemente und durch die Säuren konnten beseitigt werden. Die Thalliumabsorption ist über einen weiten Temperaturbereich bei der Veraschung konstant. Zur Eichung dienen synthetische Lösungen von Cobalt- bzw. Nikkelmatrix und Thallium. Die Nachweisgrenze für Thallium beträgt 0,2 ppm. Die Mechanismen der Störungen werden diskutiert.

     

Porphyrin Network Polymers Prepared via a Click Reaction and Facilitated Oxygen Permeation Through Their Membranes

Network polymers of cobaltporphyrin derivatives are prepared by a facile click reaction via the Michael addition of acetoacetate‐substituted tetraphenyl cobaltporphyrin and tri‐ or tetra‐acrylates. The conversion is saturated for 1 h in the presence of a catalyst, which almost reaches the same gelation point of the formed network polymers. Deeply and homogeneously red‐colored membranes with a sub‐micrometer thickness are yielded on a porous supporting membrane. They are still tough even with a very high content of the rigid porphyrin residue. The oxygen permeability is high, at 10–100 Barrer, and the oxygen/nitrogen permselectivity (P_O2/P_N2) is significantly enhanced with the porphyrin content reaching 30, for the membranes with ca. 70 wt% porphyrin content.

     

Atomic‐Scale Visualization of the Stepwise Metal‐Mediated Dehalogenative Cycloaddition Reaction Pathways: Competition between Radicals and Organometallic Intermediates

Dehalogenative cycloaddition reaction is a powerful strategy to generate new ring scaffolds with π‐conjugated features on a surface, and thus holds great promise toward atomically precise electronic devices or nanomaterials. The ortho‐dihalo substitution provides a good strategy to realize cycloaddition. However, the limited understanding of intermediate states involved hinders mechanistic exploration for further precise design and optimization of reaction products. Now, the evolutions of competing surface‐stabilized radicals and organometallic intermediates in real space were visualized toward the formation of dominant conjugated four‐membered ring connections. From the interplay of scanning tunneling microscopy and density functional theory calculations, the stepwise metal‐mediated dehalogenative cycloaddition pathway is elucidated both experimentally and theoretically. The results provide fundamental insights into the intermediate states involved in on‐surface synthesis.