Novel Copolymers of 4-Fluorostyrene. 1. Alkyl Ring-Substituted 2-Phenyl-1,1-dicyanoethylenes

Novel copolymers of trisubstituted ethylene monomers, alkyl ring-substituted 2-phenyl-1,1-dicyanoethylenes, RC₆H₄CH = C(CN)₂ (where R is 2-methyl, 3-methyl, 4-methyl, 4-ethyl, 4-i-propyl, 4-butyl, 4-i-butyl, and 4-t-butyl) and 4-fluorostyrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is 4-ethyl (42.6) > 4-butyl (29.4) > 4-t-butyl (26.7) > 4-i-butyl (1.6) > 4-i-propyl (1.29) > 3-methyl (1.26) > 2-methyl (0.8) > 4-methyl (0.4). High T _g of the copolymers, in comparison with that of poly(4-fluorostyrene) indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in 183–500°C range with residue (5–30% wt.), which then decomposed in the 500–800°C range.     

Control of the Orientation and Photoinduced Phase Transitions of Macrocyclic Azobenzene

Photoinduced phase transitions caused by photochromic reactions bring about a change in the state of matter at constant temperature. Herein, we report the photoinduced phase transitions of crystals of a photoresponsive macrocyclic compound bearing two azobenzene groups ( 1 ) at room temperature on irradiation with UV (365 nm) and visible (436 nm) light. The trans/trans isomer undergoes photoinduced phase transitions (crystal–isotropic phase–crystal) on UV light irradiation. The photochemically generated crystal exhibited reversible phase transitions between the crystal and the mesophase on UV and visible light irradiation. The molecular order of the randomly oriented crystals could be increased by irradiating with linearly polarized visible light, and the value of the order parameter was determined to be ?0.84. Heating enhances the thermal cis‐to‐trans isomerization and subsequent cooling returned crystals of the trans/trans isomer.     

Induced Fitting and Polarization of a Bromine Molecule in an Electrophilic Inorganic Molecular Cavity and Its Bromination Reactivity

Dodecavanadate, [V₁₂O₃₂]^4? (V12), possesses a 4.4 Å cavity entrance, and the cavity shows unique electrophilicity. Owing to the high polarizability, Br₂ was inserted into V12, inducing the inversion of one of the VO₅ square pyramids to form [V₁₂O₃₂(Br₂)]^4? (V12(Br2)). The inserted Br₂ molecule was polarized and showed a peak at 185 cm^?1 in the IR spectrum. The reaction of V12(Br2) and toluene yielded bromination of toluene at the ring, showing the electrophilicity of the inserted Br₂ molecule. Compound V12(Br2) also reacted with propane, n‐butane, and n‐pentane to give brominated alkanes. Bromination with V12(Br2) showed high selectivity for 3‐bromopentane (64 %) among the monobromopentane products and preferred threo isomer among 2‐,3‐dibromobutane and 2,3‐dibromopenane. The unique inorganic cavity traps Br₂ leading the polarization of the diatomic molecule. Owing to its new reaction field, the trapped Br₂ shows selective functionalization of alkanes.     

Laser spectroscopy of trapped 7Be and 10Be at a prototype slow RI-beam facility of RIKEN

A next-generation slow radioactive nuclear ion beam facility (SLOWRI) which provides slow, high-purity and small emittance ion beams of all elements is being build as one of the principal facilities at the RIKEN RI-beam factory (RIBF). High energy radioactive ion beams from the projectile fragment separator BigRIPS are thermalized in a large gas catcher cell. The thermalized ions in the gas cell are guided and extracted to a vacuum environment by a combination of dc electric fields and inhomogeneous rf fields (rf carpet ion guide). From there the slow ion beam is delivered via a mass separator and a switchyard to various devices: such as an ion trap, a collinear fast beam apparatus, and a multi-reflection time of flight mass spectrometer. In the R&D works at the present RIKEN facility, an overall efficiency of 5% for a 100A MeV ⁸Li ion beam from the present projectile fragment separator RIPS was achieved and the dependence of the efficiency on the ion beam intensity was investigated. Recently our first spectroscopy experiment at the prototype SLOWI was performed on Be isotopes. Energetic ions of ¹⁰Be and ⁷Be from the RIPS were trapped and laser cooled in a linear rf trap and the specific mass shifts of these isotopes were measured for the first time.     

Injectable Polypeptide Hydrogel Depot System for Assessment of the Immune Response–Inducing Efficacy of Sustained Antigen Release Alone

Vaccines typically contain an antigen, delivery system (vehicle), and adjuvant, all of which contribute to inducing a potent immune response. Consequently, design of new vaccines is difficult, because the contributions and interactions of these components are difficult to distinguish. Here, it is aimed to develop an easy‐to‐use, non‐immunogenic, injectable depot system for sustained antigen release that will be suitable for assessing the efficacy of prolonged antigen exposure per se for inducing an immune response. This should mimic real‐life infections. Recombinant elastin‐like polypeptides with periodic cysteine residues (cELPs) are selected, which reportedly show little or no immunogenicity, as carriers and tetanus toxoid (Ttd) as an antigen. After subcutaneous injection of the mixture, cELP rapidly forms a disulfide cross‐linked hydrogel in situ, within which Ttd is physically incorporated, affording a biodegradable antigen depot. A series of Ttd‐containing hydrogels is examined. A single injection induces high levels of tetanus antibody with high avidity for at least 20 weeks in mice. The chain length of cELP proves critical, whereas differences in hydrophobicity has little effect, although hydrophilic cELPs are more rapidly biodegraded. This system's ability to distinguish the contribution of sustained antigen release to antibody induction should be helpful for rational design of next‐generation vaccines.     

Sojourn time analysis for a cyclic-service tandem queueing model with general decrementing service

A sojourn time analysis is provided for a cyclic-service tandem queue with general decrementing service which operates as follows: starting once a service of queue 1 in the first stage, a single server continues serving messages in queue 1 until either queue 1 becomes empty, or the number of messages decreases to k less than that found upon the server's last arrival at queue 1, whichever occurs first, where 1 ≤ k ≤ ∞. After service completion in queue 1, the server switches over to queue 2 in the second stage and serves all messages in queue 2 until it becomes empty. It is assumed that an arrival stream is Poissonian, message service times at each stage are generally distributed and switch-over times are zero. This paper analyzes joint queue-length distributions and message sojourn time distributions.     

Structural studies of phase transitions in crystalline and liquid halides (ZnCl<Subscript>2</Subscript>, AlCl<Subscript>3</Subscript>) under pressure

The results of investigating the phase diagrams of ZnCl₂ and AlCl₃ halides, as well as the structure of the shortrange order of the corresponding melts under pressures up to 6.5 GPa, by the method of energy-dispersive x-ray diffraction are reported. When a ZnCl₂ crystal is compressed, a phase transition occurs from the γ phase (HgI₂ structure type) to the δ phase (distorted CdI₂ structure, WTe₂ type). The structural studies of the liquid state of ZnCl₂ and AlCl₃ indicate that the intermediate-range order decreases rapidly in the tetrahedral network of both melts as the pressure increases to 1.8 and 2.3 GPa for ZnCl₂ and AlCl₃, respectively. With further compression, the transitions in both melts occur with a change in the structure of the short-range order and with an increase in the coordination number. In this case, the transition in AlCl₃ occurs at ≈4 GPa and is a sharp first order transition, whereas the transition in ZnCl₂ occurs more smoothly in a pressure range of 2–4 GPa with a maximum intensity near 3 GPa. Thus, the AlCl₃ and ZnCl₂ compounds exemplify the existence of two phenomena—gradual decay of intermediate-range structural correlations and a sharper liquid-liquid coordination transition.     

Formation of a ripple pattern at a water/silicon interface using an oscillating bubble

A single femtosecond laser pulse was irradiated at a water/silicon interface, and the processed surface was investigated. Rings surrounded by ripples were found within the irradiated spot. The diameter of the rings ranged from 500 nm to 10 μm. It is proposed that acoustic waves, caused by the oscillating motion of bubbles near the water/silicon interface, deformed the melting silicon surface. In the present work, a pulse (pulse width: 150 fs) was tightly focused in water to induce optical breakdown, and a bubble was generated at an arbitrary spot. When the power density was below the ablation threshold and above the melting threshold at the silicon surface and set above the breakdown threshold at the focus in water, a pattern was generated at a specific place and with a specific size. PACS 79.20.Ds; 42.62.Cf     

A capacity scaling heuristic for the multicommodity capacitated network design problem

In this paper, we propose a capacity scaling heuristic using a column generation and row generation technique to address the multicommodity capacitated network design problem. The capacity scaling heuristic is an approximate iterative solution method for capacitated network problems based on changing arc capacities, which depend on flow volumes on the arcs. By combining a column and row generation technique and a strong formulation including forcing constraints, this heuristic derives high quality results, and computational effort can be reduced considerably. The capacity scaling heuristic offers one of the best current results among approximate solution algorithms designed to address the multicommodity capacitated network design problem.     

Multiple ligand transfer reaction between [CpRu(L)(AN)2][PF6] (L=AN, CO, P(OMe)3; AN=acetonitrile) and CpFe(CO)L′X (L′=CO, PMe3, PMe2Ph, PMePh2, PPh3, P(OPh)3; X=Cl, Br, I)

Treatment of ruthenium complexes [CpRu(AN)₃][PF₆] (1a) (AN=acetonitrile) with iron complexes CpFe(CO)₂X (2a–2c) (X=Cl, Br, I) and CpFe(CO)L′X (6a–6g) (L′=PMe₃, PMe₂Ph, PMePh₂, PPh₃, P(OPh)₃; X=Cl, Br, I) in refluxing CH₂Cl₂ for 3 h results in a triple ligand transfer reaction from iron to ruthenium to give stable ruthenium complexes CpRu(CO)₂X (3a–3c) (X=Cl, Br, I) and CpRu(CO)L′X (7a–7g) (L′=PMe₃, PMe₂Ph, PMePh₂, PPh₃, P(OPh)₃; X=Br, I), respectively. Similar reaction of [CpRu(L)(AN)₂][PF₆] (1b: L=CO, 1c: P(OMe)₃) causes double ligand transfer to yield complexes 3a–3c and 7a–7h. Halide on iron, CO on iron or ruthenium, and two acetonitrile ligands on ruthenium are essential for the present ligand transfer reaction. The dinuclear ruthenium complex 11a [CpRu(CO)(μ-I)]₂ was isolated from the reaction of 1a with 6a at 0°C. Complex 11a slowly decomposes in CH₂Cl₂ at room temperature to give 3a, and transforms into 7a by the reaction with PMe₃.