Non-Thermal Effects of Microwave Oven Heating on Ground Beef Meat Studied in the Mid-Infrared Region by Fourier Transform Infrared Spectroscopy

The effects of cooking by microwave oven on the secondary structure of lipid and protein contents in bovine ground beef were investigated in the midinfrared region by Fourier transform infrared (FTIR) spectroscopy to highlight the nonthermal effects of microwave oven heating. Samples of bovine ground beef were cooked in a conventional electric oven at the temperature of 175°C for 15 min and in a microwave oven at 800 W for 1½ min. Spectra analyses of bovine meat after cooking in the conventional oven evidenced a relevant increase in intensity of the carbonyl band at 1742 cm^?1 and of the methylene group at 2921 and 2853 cm^?1 that can be attributed to the Maillard reaction. In contrast, the increase in intensity of these bands after microwave oven heating was less than that which occurred after conventional cooking, showing that the temperature in ground beef meat samples during microwave heating was less than that induced by conventional heating. Spectral analysis in the amide I, II, and III regions showed that a significant increase in intensity occurred in the region from 1660 to 1675 cm^?1 and around 1695, 1635, 1575, and 988 cm^?1 after cooking by means of a microwave oven. These features, which can be attributed to β-turns and β-sheet structures, are characteristic of disorder processes in meat protein contents and increasing transition dipole coupling due to higher contents in aggregated β-sheet structures. This result highlighted nonthermal effects of microwave oven heating in the protein's secondary structure.     

Foundations for a Theory of Complex Matroids

We explore a combinatorial theory of linear dependency in complex space, complex matroids, with foundations analogous to those for oriented matroids. We give multiple equivalent axiomatizations of complex matroids, showing that this theory captures properties of linear dependency, orthogonality, and determinants over ? in much the same way that oriented matroids capture the same properties over ?. In addition, our complex matroids come with a canonical S ¹ action analogous to the action of ?^? on a complex vector space. Our phirotopes (analogs of determinants) are the same as those studied previously by Below, Krummeck, and Richter-Gebert (Discrete and Computational Geometry, Springer, pp.?203?C233, 2003) and Delucchi (Diploma Thesis, ETH Zurich, 2003). We further show that complex matroids cannot have vector axioms analogous to those for oriented matroids.     

Metriplectic framework for dissipative magneto-hydrodynamics

The metriplectic framework, which allows for the formulation of an algebraic structure for dissipative systems, is applied to visco-resistive Magneto-Hydrodynamics (MHD), adapting what had already been done for non-ideal Hydrodynamics (HD). The result is obtained by extending the HD symmetric bracket and free energy to include magnetic field dynamics and resistive dissipation. The correct equations of motion are obtained once one of the Casimirs of the Poisson bracket for ideal MHD is identified with the total thermodynamic entropy of the plasma. The metriplectic framework of MHD is shown to be invariant under the Galileo Group. The metriplectic structure also permits us to obtain the asymptotic equilibria toward which the dynamics of the system evolves. This scheme is finally adapted to the two-dimensional incompressible resistive MHD, that is of major use in many applications.     

Fano varieties of cubic fourfolds containing a plane

We prove that the Fano variety of lines of a generic cubic fourfold containing a plane is isomorphic to a moduli space of twisted stable complexes on a K3 surface. On the other hand, we show that the Fano varieties are always birational to moduli spaces of twisted stable coherent sheaves on a K3 surface. The moduli spaces of complexes and of sheaves are related by wall-crossing in the derived category of twisted sheaves on the corresponding K3 surface.     

Information dynamics algorithm for detecting communities in networks

The problem of community detection is relevant in many scientific disciplines, from social science to statistical physics. Given the impact of community detection in many areas, such as psychology and social sciences, we have addressed the issue of modifying existing well performing algorithms by incorporating elements of the domain application fields, i.e. domain-inspired. We have focused on a psychology and social network-inspired approach which may be useful for further strengthening the link between social network studies and mathematics of community detection. Here we introduce a community-detection algorithm derived from the van Dongen’s Markov Cluster algorithm (MCL) method [4] by considering networks’ nodes as agents capable to take decisions. In this framework we have introduced a memory factor to mimic a typical human behavior such as the oblivion effect. The method is based on information diffusion and it includes a non-linear processing phase. We test our method on two classical community benchmark and on computer generated networks with known community structure. Our approach has three important features: the capacity of detecting overlapping communities, the capability of identifying communities from an individual point of view and the fine tuning the community detectability with respect to prior knowledge of the data. Finally we discuss how to use a Shannon entropy measure for parameter estimation in complex networks.     

Assessment of the illumination dependency of Al2O3 and SiO2 rear‐passivated p‐type silicon solar cells

This Letter discusses an important difference between positively charged SiO₂ and negatively charged Al₂O₃ rear‐passivated p‐type Si solar cells: their illumination level dependency. For positively charged SiO₂ rear‐passivated p‐type Si solar cells, a loss in short circuit current (J_SC) and open circuit voltage (V_OC) as a function of illumination level is mainly caused by parasitic shunting and a decrease in surface recombination, respectively. Hence, the relative loss in cell conversion efficiency, J_SC, and V_OC as a function of the illumination level for SiO₂ compared to Al₂O₃ rear‐passivated p‐type Si solar cells has been measured and discussed. Subsequently, an exponential decay fit of the loss in cell efficiency is applied in order to estimate the difference in the energy output for both cell types in three different territories: Belgium (EU), Seattle and Austin (US). The observed trends in the difference in energy output between both cells, as a function of time of the year and region, are as expected and discussed. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Large-area phoswich balloon experiment for hard-X-ray astronomy

Summary We describe a balloon experiment, currently in the marking, devoted to the observation of celestial X-ray sources. The main features of the X-ray telescope are summarized as follows. It operates in the energy band from 20 to 300 keV. Its energy resolution is about 17% at 60 keV. Under the hypothesis of 10⁴ s of observing time, 3 mbar of residual atmospheric pressure and 3σ of statistical significance, the expected sensitivity of the instrument is 2·10⁻⁶ photons/cm² s keV in the (20÷200) keV energy band, corresponding to about 1 milliCrab. Its high sensitivity allows us to detect both time variability in the flux and cyclotron lines in the spectra of X-ray sources. It has a field of view of 3° FWHM and has the possibility of resolving complex fields by using multipitch modulation collimators. With such a configuration its angular resolution is about 10′. Paper presented at the 2° Convegno Nazionale di Fisica Cosmica, held at L'Aquila, 29 May–2 June 1984.     

Iron stains on paper. Can electrophoretic removal become an effective alternative to chemical cleaning?

Abstract

Research in restoration and conservation is directed vs. more sustainable working materials, methods and technologies. Electrophoretic removal, from porous material, of undesired stains due to charged species is theoretically an interesting alternative to chemical cleaning methods, but the lack of specific and comprehensive research work leads to controversial opinions about the efficiency and the needed harmfulness for the treated objects. In this work paper, samples with artificial rust stains were subjected to electrophoretic cleaning treatments in mineral water as electrolyte. Treatments were carried out either in a bath by complete sample immersion between the distanced electrodes or by sample wetting and sandwiching between the electrodes. Evaluation of cleaning efficiency and treatment effects was based on colour change measurements (image analysis of scanned paper samples before and after the treatment and by colorimetric data via spectrophotometric measurements), investigation of morphological changes by SEM observations and folding endurance measurements.     

Free and bound phenolic compounds in barley (Hordeum vulgare L.) flours. evaluation of the extraction capability of different solvent mixtures and pressurized liquid methods by micellar electrokinetic chromatography and spectrophotometry

The solution speciation of metals is a critical parameter controlling the bioavailability, solution-solid phase distribution and transport of metals in soils. The natural metal-complexing ligands that exist in soil solution include inorganic anions, inorganic colloids, organic humic substances, amino acids (notably phytosiderophores and bacterial siderophores) and low-molecular mass organic acids. The latter two groups are of particular significance in the soil surrounding plant roots (the rhizosphere). A number of analytical methodologies, encompassing computational, spectroscopic, physico-chemical and separation techniques, have been applied to the measurement of the solution speciation of metals in the environment. However, perhaps with the exception of the determination of the free metal cation, the majority of these techniques rarely provide species specific information. High-performance liquid chromatography (HPLC) coupled to a sensitive detection system, such as inductively coupled plasma mass spectrometry (ICP-MS) or electrospray ionisation mass spectrometry (ESI-MS), offers the possibility of separating and detecting metal-organic acid complexes at the very low concentrations normally found in the soil environment. This review, therefore, critically examines the literature reporting the HPLC separation of metal-organic acid complexes with reference to thermodynamic equilibrium and kinetic considerations. The limitations of HPLC techniques (and the use of thermodynamic equilibrium calculations to validate analytical results) are discussed and the metal complex characteristics necessary for chromatographic separation are described.