Kalman filter applied to setpoint control in continuous titrations

A state-space model is described for continuous titrations based on first-order dynamics. The Kalman filter allows on-line monitoring of an empirically established setpoint in the titration curve. The algorithm advocated is examined for potentiometric titrations of ca. 10^?3 M solutins of acids, silver(I) and copper(II). Only gross indications of the essential parameters such as the time constant and noise covariances are required. The computer-controlled titration system is compared with a conventional setpoint titrator. Especially in cases of slow response times and steep inflections, there are advantages in both accuracy and speed when the Kalman filter is applied.     

Deactivation of silica surfaces with a silanol-terminated polysiloxane; structural sharacterization by inverse gas chromatography and solid-state NMR

Retention gape deactivated with Silicone OV-1701-OH show good chromatographic performance and remarkable stability against water induced stationary phase degradrdation. In an attempt to better understand the findamentals off the deactivation process using silanol terminated polysiloxanes, a fumed silica was deactivated with Silicon OV-1701-OH. In contrast to fused silic capillaries, fumed silica (Aerosil A-200) can be studied by ²⁹Si cross-polarization magic-angle-spinning (CPMAS) NMR, thus serving as a model substrate for fused silica. Retention data from inverse gas chromatography at infinite dilurion and ²⁹Si CP MAS NMR data of five Aerosil phases, differing in residual silanol surface concentration, are correlated with the aim of validating this approach for stationary phase characterization. A comparatively detailed model of the deactivating polymer layer that explains the observed absorption activities is deduced. Surface silanols are shown to play a key role in the polymer layer, the structure of which is of primary importance for the absorption behavior after deactivation. Contrary to common belief, the absolute silanol surface concentration after deativation is only of secondary importance for the overall absorption activity. High silanol surface concentrations enhance degradation of the polysiloxane chains into small cyclic fragments as well as subsequent absorption and immobolization to the silica substrate surface. The mobility of linear polysiloxane chains in the kHz regime (as determined bby NMR cross-polarization dynamics) appears to determine the extent which the residual silanols are accessible for analytes. It is therefore anticipated that there is an optimum silanol surface concentration of fused silica surfaces to be deactivated with silanol terminated polysiloxanes; it should be lazrge enough to adsord polymer fragments, but not large to avoid excessive residual silanol activity.     

On the escape process during phase inversion of an emulsion

This paper deals with a phenomenon which plays an important role in the phase inversion process of emulsions. This process is governed by the interplay of coalescence of droplets, often leading to double emulsions, and the escape of those internal droplets. The latter process retards the inversion process. Coalescence has been the subject of many studies, contrary to the escape event. This paper addresses the escape process both theoretically and experimentally. The model developed analyses the rate of the escape of internal droplets from the mother droplet via a coalescence process, where the internal flow, as generated by the external flow, generates the viscous force for coalescence. Incomplete mixing in the droplet has been assumed. Experimental data on the escape rate of oil droplets from O/W/O emulsions have been analysed using a Computational Fluid Dynamics approach, where the model as indicated above has been incorporated. Experimental data and simulations compare very well. Data have been compared on varying the size of the inner droplets and the rotational speed of the vessel where the double emulsion has been formed and where the escape took place.     

Improved method for the determination of sulfur components in natural gas

Determination of trace concentrations of sulfur components in natural gas is a true analytical challenge. Only analytical procedures based on gas chromatography can meet the sensitivity and accuracy requirements dictated by environmental regulation institutions and modern chemical industry. In the present contribution the sample pretreatment and chromatographic separation steps have been evaluated and optimized based on the use of a flamebased sulfur chemiluminescence detector (SCD) for target compound detection. The proposed instrument consists of a programmed temperature vaporizing (PTV) injector employing a liner packed with Chromosorb 104, a 4 μm thick film apolar column and a flame-based SCD. Using a 13 mL sample loop the detection limit achievable with the new method is 3 μg S/m³. The precision of replicate measure. ments is generally in the range of 5–15% relative standard deviation. Lower detection limits can be achieved by preconcentrating larger sample volumes, e.g. 100 mL.     

Multiplexed protein detection using an affinity aptamer amplification assay

Affinity probe capillary electrophoresis (APCE) is potentially one of the most versatile technologies for protein diagnostics, offering an excellent balance between robustness, analysis speed and sensitivity. Combining the immunosensing and separating strength of capillary electrophoresis with the signal enhancement power of nucleic acid amplification, aptamers can further push the analytical limits of APCE to offer ultrasensitive, multiplexed detection of protein biomarkers, even when differences in electrophoretic mobility between the different aptamer-target complexes are limited. It is demonstrated how, through careful selection of experimental parameters, simultaneous detection of picomolar levels of three target proteins can be achieved even with aptamers that were initially selected under very different conditions and further taking into account that the aptamers need to be modified to allow successful PCR amplification. Aptamer-enhanced APCE offers limits of detection that are orders of magnitude lower than those that can be achieved through traditional capillary electrophoresis-based immunosensing. With recent developments in aptamer selection that for the first time realise the promise of aptamers as easily accessible, high affinity recognition molecules, it can therefore be envisioned that aptamer-enhanced APCE on parallel microfluidic platforms can be the basis for a truly high-throughput multiplexed proteomics platform, rivalling genetic screening for the first time.     

Synthesis of oligosaccharides catalyzed by thermostable β-glucosidase fromPyrococcus furiosus

Focusing on CO₂ fixation, photoautotrophic cultivation of the red algaPorphyridium cruentum was investigated by means of a batch culture under a 5% CO₂-enriched atmosphere. The algal growth kinetics was successfully described with a logistic model, and simulation of a continuous culture under the optimum growth conditions (30°C, 12 klux and 1.18 g-cells/L) showed that the algal CO₂-fixation activity could reach 0.66 g-CO₂/(L X d). Under the same growth conditions, eicosapentaenoic acid (20:5 n-3, EPA) and arachidonic acid (20:4 n-6, ARA) yields were similarly calculated to be 3.6 mg-EPA/(L X d) and 6.5 mg-ARA/(L X d), respectively.