N′-5-四唑基-N-芳甲酰基硫脲的合成及其生物活性研究(I)

为寻找新的高活性农药 ,根据生物等排原理 ,设计合成了 10种未见文献报道的N′ 5 ( 1H 1,2 ,3 ,4 四唑基 ) N 芳甲酰基硫脲类化合物 .它们的结构经IR ,1HNMR和元素分析确证 .初步的生物活性测定结果表明 ,部分化合物具有优良的除草活性或植物生长调节活性 .     

Effect of oxidative stabilization on the electrochemical performance of carbon mesophases as electrode materials for lithium batteries

The effect of oxidative stabilization as a mean to modify the carbon texture was essayed in a group of mesophases previous to carbonization at 900 °C with the aim of evaluating the influence on electrochemical performance when used as electrode materials in lithium test cells. X-ray diffraction, optical microscopy and chemical analysis, Fourier-transform infrared spectroscopy have been used to describe the compositional and textural properties of the as-produced parent mesophases, the samples were further treated under air current to stabilize their microstructures and the corresponding carbonized samples at 900 °C. The electrochemical performance was determined by the galvanostatic method and further correlated to the physical–chemical properties and interface resistance of the materials. In all cases, the stabilization process has demonstrated a beneficial effect on the capacity retention in the measured range.     

Slow water diffusion in micellar solutions

Slowly diffusing water molecules were found by quasi-elastic neutron scattering (QENS) in a sodium dodecyl sulfate (SDS) micellar solution, and both their diffusion coefficient (4.33 x 10(-6) cm2 x s(-1)) and mole fraction (0.057) were determined. After successfully checking the mean slowing down of solvent molecules by the gradient compensated stimulated spin-echo (GCSTE) pulse sequence NMR method, a similar effect was observed with this technique in the solvent phase of dodecyl trimethylammonium bromide (DTAB) and differing chain length (X = 12, 20, 30, and 40) ethoxylated nonyl phenol (9NX) micellar systems. Following the literature, the experimental results are qualitatively explained by assuming that, apart from ionic hydration, H-bonds may form between the solvent molecules and the O or N atoms present in the hydrophilic (head)groups of the micelle-forming monomers.     

Cyclization of Nitrospirobenzopyrans to Bridged Benzoxazepino[3,2-a]indoles

Condensation of 1-substituted 1,2,3,9a-tetrahydro-9H-imidazo[1,2-a]indol-2-ones with 5-nitrosalicylaldehyde afforded 1′-[(N-monosubstituted carbamoyl)methyl]indoline nitrospirobenzopyrans. Treatment of the latter with strong base led to the formation of a mixture of cis/trans-5a,13-methano-1,3-benzoxazepino[3,2-a]indoles. Results of semiempirical calculations gave evidence that such a transformation of nitrospirobenzopyrans to bicyclic indole derivatives could proceed via a single transition state, where the negatively charged carbon atom attacks the vinylic double bond of the spiropyran system.     

电化学合成镍配合物的研究

采用金属镍为“牺牲”阳极，首次在无隔膜电解槽中，电化学溶解金属镍一步 制备了纳米NiO前驱体Ni(Oet)2,Ni(Obu)2,Ni(Oet)2(acac)2，Ni(Obu)2(acac)2 [acac为乙酰丙酮基].产物通过红外光谱（FT-IR）、拉曼光谱（Raman spectrum） 进行表征。同时讨论了影响电合成镍醇盐及其配合物的关键因素。实验表明，防止 阳极钝化，温度控制在30-40℃，采用有机胺溴化物为导电盐，可以提高电合成效 率。     

On-line filtration system for determining total chromium and chromium in the soluble fraction of industrial effluents by flow injection flame atomic absorption spectrometry

Two manifolds were assessed for the purpose of determining both the total chromium content and that present as a soluble form in industrial effluents by flow injection flame atomic absorption spectrometry (FI-FAAS). To determine the chromium content in the soluble fraction the samples were used without additional treatment, a 0.45 microm filter being included in the FI system. To determine the total chromium content, the samples were acidified with nitric acid 20% (v/v) and heated for 30 s in a microwave oven (temperatures of about 70 degrees C were reached). The problem posed by the very different concentration range in which total and soluble chromium are present was overcome by using programmed flow rate methodology and by only partially emptying the sample loop. A personal computer controlled both the rotation speed of a peristaltic pump and the volume of sample injected into the system, thus obtaining the dispersion degree required. Using the manifold proposed, the chromium content in the soluble fraction can be determined in the 0.5-20 microg mL(-1) range using a 10 microg mL(-1) single standard for calibration. To determine the total chromium content, a calibration line in the 20-200 microg mL(-1) range was obtained using a single 50 microg mL(-1) chromium standard solution. The reliability of the semi-automatic devices was verified by comparing the results obtained with those found by treating the samples and using both FAAS in a conventional way and a spectrophotometric method using diphenylcarbazide at the 95% confidence level (ANOVA test). The proposed procedures showed a RSD lower than +/-3%.     

On Transition Structures for Hydride Transfer Step in Enzyme Catalysis. A Comparative Study on Models of Glutathione Reductase Derived from Semiempirical, HF, and DFT Methods

As a model of the chemical reactions that take place in the active site of gluthatione reductase, the nature of the molecular mechanism for the hydride transfer step has been characterized by means of accurate quantum chemical characterizations of transition structures. The calculations have been carried out with analytical gradients at AM1 and PM3 semiempirical procedures, ab initio at HF level with 3-21G, 4-31G, 6-31G, and 6-31G basis sets and BP86 and BLYP as density functional methods. The results of this study suggest that the endo relative orientation on the substrate imposed by the active site is optimal in polarizing the C4-Ht bond and situating the system in the neighborhood of the quadratic region of the transition structure associated to the hydride transfer step on potential energy surface. The endo arrangement of the transition structure results in optimal frontier HOMO orbital interaction between NADH and FAD partners. The geometries of the transition structures and the corresponding transition vectors, that contain the fundamental information relating reactive fluctuation patterns, are model independent and weakly dependent on the level of theory used to determine them. A comparison between simple and complex molecular models shows that there is a minimal set of coordinates describing the essentials of hydride transfer step. The analysis of transition vector components suggests that the primary and secondary kinetic isotope effects can be strongly coupled, and this prompted the calculation of deuterium and tritium primary, secondary, and primary and secondary kinetic isotope effects. The results obtained agree well with experimental data and demonstrate this coupling.     

Electrodeposition of cobalt on stainless steel foils. Preparation of57Co sources for Mössbauer experiments

Conditions for the electrodeposition of⁵⁹Co and⁵⁷Co on stainless steel foils have been studied. A set of electrolytic parameters has been determined to get a reasonably good electrodeposited sample. The⁵⁷Co electrodeposited foil was then introduced in a quartz tube to be annealed in an argon flow. The final product was a 11 Ci Mössbauer source for college experiments which was succesfully tested by obtaining spectra of stainless steel and sodium nitroprusside.     

Effects of genesis and ionizing radiation on the kinetics of reduction of NiO-CeO2 mixed oxides with hydrogen

The reduction of mixed oxides NiO-CeO₂ of various composition with hydrogen was studied at 290–470° by means of thermogravimetry. Some physicochemical properties of the system were also investigated and compared with earlier studied analogous samples of different “origin”. The degree of mutual interaction of the two components, the reduction kinetics and the sensitivity to the different sorts of radiation (gamma-rays, fast neutrons and electrons), applied in different doses, are strongly affected by the “pre-history” and by the composition in both compared series of mixed oxides.     

Extraction of the [(C4H9)4N]3[Fe(SCN)6] ion-pair with chloroform: Spectrophotometric determination of iron

When excesses of ammonium thiocyanate and tetrabutylammonium chloride are added to an iron(III) solution, a water-insoluble ion-pair is formed. This compound is soluble in chloroform and other organic solvents. The variables affecting extraction with CHCl₃ are studied in order to obtain the optimal conditions and an extraction procedure is proposed. The separation of iron as a previous step to its spectrophotometric determination is studied.