Separation of glycosidic catiomers by TWIM‐MS using CO2 as a drift gas

Traveling wave ion mobility mass spectrometry (TWIM‐MS) is shown to be able to separate and characterize several isomeric forms of diterpene glycosides stevioside (Stv) and rebaudioside A (RebA) that are cationized by Na⁺ and K⁺ at different sites. Determination and characterization of these coexisting isomeric species, herein termed catiomers, arising from cationization at different and highly competitive coordinating sites, is particularly challenging for glycosides. To achieve this goal, the advantage of using CO₂ as a more massive and polarizable drift gas, over N₂, was demonstrated. Post‐TWIM‐MS/MS experiments were used to confirm the separation. Optimization of the possible geometries and cross‐sectional calculations for mobility peak assignments were also performed. Copyright © 2015 John Wiley & Sons, Ltd.     

Validation of method for determination of different classes of pesticides in aqueous samples by dispersive liquid-liquid microextraction with liquid chromatography-tandem mass spectrometric detection

In this study, a simple, rapid and efficient method has been developed for the extraction and preconcentration of different classes of pesticides, carbofuran (insecticide), clomazone (herbicide) and tebuconazole (fungicide) in aqueous samples by dispersive liquid-liquid microextraction (DLLME) coupled with liquid chromatography-tandem mass spectrometric detection. Some experimental parameters that influence the extraction efficiency, such as the type and volume of the disperser solvents and extraction solvents, extraction time, speed of centrifugation, pH and addition of salt were examined and optimized. Under the optimum conditions, the recoveries of pesticides in water at spiking levels between 0.02 and 2.0 μg L⁻¹ ranged from 62.7% to 120.0%. The relative standard deviations varied between 1.9% and 9.1% (n = 3). The limits of quantification of the method considering a 50-fold preconcentration step were 0.02 μg L⁻¹. The linearity of the method ranged from 1.0 to 1000 μg L⁻¹ for all compounds, with correlation coefficients varying from 0.9982 to 0.9992. Results show that the method we propose can meet the requirements for the determination of pesticides in water samples. The comparison of this method with solid-phase extraction indicates that DLLME is a simple, fast, and low-cost method for the determination of pesticides in natural waters.     

Dynamic processes in a silicate liquid from above melting to below the glass transition

We collect and critically analyze extensive literature data, including our own, on three important kinetic processes--viscous flow, crystal nucleation, and growth--in lithium disilicate (Li(2)O·2SiO(2)) over a wide temperature range, from above T(m) to 0.98T(g) where T(g) ≈ 727 K is the calorimetric glass transition temperature and T(m) = 1307 K, which is the melting point. We found that crystal growth mediated by screw dislocations is the most likely growth mechanism in this system. We then calculated the diffusion coefficients controlling crystal growth, D(eff)(U), and completed the analyses by looking at the ionic diffusion coefficients of Li(+1), O(2-), and Si(4+) estimated from experiments and molecular dynamic simulations. These values were then employed to estimate the effective volume diffusion coefficients, D(eff)(V), resulting from their combination within a hypothetical Li(2)Si(2)O(5) "molecule". The similarity of the temperature dependencies of 1/η, where η is shear viscosity, and D(eff)(V) corroborates the validity of the Stokes-Einstein/Eyring equation (SEE) at high temperatures around T(m). Using the equality of D(eff)(V) and D(eff)(η), we estimated the jump distance λ ~ 2.70 ? from the SEE equation and showed that the values of D(eff)(U) have the same temperature dependence but exceed D(eff)(η) by about eightfold. The difference between D(eff)(η) and D(eff)(U) indicates that the former determines the process of mass transport in the bulk whereas the latter relates to the mobility of the structural units on the crystal/liquid interface. We then employed the values of η(T) reduced by eightfold to calculate the growth rates U(T). The resultant U(T) curve is consistent with experimental data until the temperature decreases to a decoupling temperature T(d)(U) ≈ 1.1-1.2T(g), when D(eff)(η) begins decrease with decreasing temperature faster than D(eff)(U). A similar decoupling occurs between D(eff)(η) and D(eff)(τ) (estimated from nucleation time-lags) but at a lower temperatureT(d)(τ) ≈ T(g). For T > T(g) the values of D(eff)(τ) exceed D(eff)(η) only by twofold. The different behaviors of D(eff)(τ)(T) and D(eff)(U)(T) are likely caused by differences in the mechanisms of critical nuclei formation. Therefore, we have shown that at low undercoolings, viscosity data can be employed for quantitative analyses of crystal growth rates, but in the deeply supercooled liquid state, mass transport for crystal nucleation and growth are not controlled by viscosity. The origin of decoupling is assigned to spatially dynamic heterogeneity in glass-forming melts.     

pKa determinations of xanthene derivates in aqueous solutions by multivariate analysis applied to UV-Vis spectrophotometric data

Xanthenes form to an important class of dyes which are widely used. Most of them present three acid-base groups: two phenolic sites and one carboxylic site. Therefore, the pKa determination and the attribution of each group to the corresponding pKa value is a very important feature. Attempts to obtain reliable pKa through the potentiometry titration and the electronic absorption spectrophotometry using the first and second orders derivative failed. Due to the close pKa values allied to strong UV-Vis spectral overlap, multivariate analysis, a powerful chemometric method, is applied in this work. The determination was performed for eosin Y, erythrosin B, and bengal rose B, and also for other synthesized derivatives such as 2-(3,6-dihydroxy-9-acridinyl) benzoic acid, 2,4,5,7-tetranitrofluorescein, eosin methyl ester, and erythrosin methyl ester in water. These last two compounds (esters) permitted to attribute the pKa of the phenolic group, which is not easily recognizable for some investigated dyes. Besides the pKa determination, the chemometry allowed for estimating the electronic spectrum of some prevalent protolytic species and the substituents effects evaluation.     

A piezoelectric immunosensor for <Emphasis Type="Italic">Leishmania chagasi</Emphasis> antibodies in canine serum

The American visceral leishmaniasis is an important cause of morbidity and mortality in Brazil for both humans and dogs. Attempts to make a diagnosis of this disease need to be improved, especially in endemic areas, and in the tracking and screening of asymptomatic dogs, which are their main host in urban areas. A quartz crystal microbalance immunosensor for the diagnosis of the canine visceral leishmaniasis using a recombinant antigen of Leishmania chagasi (rLci2B-NH6) was developed. The rLci2B-NH6 was tightly immobilized on a quartz crystal gold electrode by self-assembled monolayer based on short-chain length thiol. The strategy was the use of the antigen-histidine tail covalently linked to glutaraldehyde performing a Schift base which permits a major exposure of epitopes and a reduced steric hindrance. The immunosensor showed good results regarding sensitivity and reproducibility, being able to distinguish positive and negative canine serum for L. chagasi. Furthermore, the immunosensor can be reused through exposure to sodium dodecyl sulfate solution, which promotes the dissociation of antigen–antibody binding, restoring the sensor surface with immobilized biologically active antigens for further analysis.     

Lupane triterpenoids,antioxidant potential and antimicrobial activity of Myrciaria floribunda (H. West ex Willd.) O. Berg.

Chemical composition of the methanol extract of Myrciaria floribunda leaves was investigated. The nor-lupane triterpenoids platanic acid and messagenic I acid were identified, along with other known triterpenoids (betulinic aldehyde, ursolic acid acetate and betulinic acid), a new lupane triterpenoid (2α,6α,30-trihydroxybetulinic acid) and the flavonoids catechin, quercetrin and mirycitrin. The structures were determined by spectroscopic methods (NMR, LC-MS, GC-MS). The major isolated compound was betulinic acid. The methanol extract and 2α,6α,30-trihydroxybetulinic acid were evaluated for their DPPH scavenging potential. The tested triterpenoid was one hundred times more active than betulinic acid, but less active than the extract. Screening for antimicrobial activity showed that the methanol extract was active against Staphylococcus aureus and Escherichia coli, but inactive against Candida albicans and Candida krusei, while 2α,6α,30-trihydroxybetulinic acid was inactive to all tested microorganisms.     

High Molecular Weight Polystyrene Obtained by Cationic Emulsion Polymerization Catalyzed by Imidazolium‐Based Ionic Liquid

The ionic liquid 1‐n‐butyl‐3‐methylimidazolium heptachlorodiferrate (BMI.Fe₂Cl₇) is efficiently used as catalyst in the cationic emulsion polymerization of styrene. The effect of different reaction temperatures, surfactant, and ionic liquid concentrations on polymer properties as molecular weight distribution and particle size is evaluated. High weight average molecular weights, above 1000 kDa, are achieved at 70% of conversion in 100 nm polystyrene particles formed mainly by micellar nucleation. Particle sizes and molecular weights increase with the decrease of the amount of surfactant. Even at low concentrations, BMI.Fe₂Cl₇/styrene molar ratio equal to 1/1000, the ionic liquid proves to be efficient for the emulsion polymerization of styrene, and lower ionic liquid concentrations lead to the formation of longer polymer chains.     

Screening for pharmaco‐toxicologically relevant compounds in biosamples using high‐resolution mass spectrometry: a ‘metabolomic’ approach to the discrimination between isomers

High‐resolution mass spectrometry (HRMS) enables the identification of a chemical formula of small molecules through the accurate measurement of mass and isotopic pattern. However, the identification of an unknown compound starting from the chemical formula requires additional tools: (1) a database associating chemical formulas to compound names and (2) a way to discriminate between isomers. The aim of this present study is to evaluate the ability of a novel ‘metabolomic’ approach to reduce the list of candidates with identical chemical formula. Urine/blood/hair samples collected from real positive cases were submitted to a screening procedure using ESI‐MS‐TOF (positive‐ion mode) combined with either capillary electrophoresis or reversed phase liquid chromatography (LC). Detected peaks were searched against a Pharmaco/Toxicologically Relevant Compounds database (ca 50 500 compounds and phase I and phase II metabolites) consisting of a subset of PubChem compounds and a list of candidates was retrieved. Then, starting from the mass of unknown, mass shifts corresponding to pre‐defined biotransformations (e.g. demethylation, glucuronidation, etc.) were calculated and corresponding mass chromatograms were extracted from the total ion current (TIC) in order to search for metabolite peaks. For each candidate, the number of different functional groups in the molecule was automatically calculated using E‐Dragon software (Talete srl, Milan, Italy). Then, the presence of metabolites in the TIC was matched with functional groups data in order to exclude candidates with structures not compatible with observed biotransformations (e.g. loss of methyl from a structure not bearing methyls). The procedure was tested on 108 pharmaco‐toxicologically relevant compounds (PTRC) and their phase I metabolites were detected in real positive samples. The mean list length (MLL) of candidates retrieved from the database was 7.01 ± 4.77 (median, 7; range, 1–28) before the application of the ‘metabolomic’ approach, and after the application it was reduced to 4.08 ± 3.11 (median 3, range 1–17). HRMS allows a much broader screening for PTRC than other screening approaches (e.g. library search on mass spectra databases). The ‘metabolomic’ approach enables the reduction of the list of candidate isomers. Copyright © 2009 John Wiley & Sons, Ltd.     

Lipase Production in Solid-State Fermentation Monitoring Biomass Growth of Aspergillus niger Using Digital Image Processing

The aim of this study was to monitor the biomass growth of Aspergillus niger in solid-state fermentation (SSF) for lipase production using digital image processing technique. The strain A. niger 11T53A14 was cultivated in SSF using wheat bran as support, which was enriched with 0.91% (m/v) of ammonium sulfate. The addition of several vegetable oils (castor, soybean, olive, corn, and palm oils) was investigated to enhance lipase production. The maximum lipase activity was obtained using 2% (m/m) castor oil. In these conditions, the growth was evaluated each 24 h for 5 days by the glycosamine content analysis and digital image processing. Lipase activity was also determined. The results indicated that the digital image process technique can be used to monitor biomass growth in a SSF process and to correlate biomass growth and enzyme activity. In addition, the immobilized esterification lipase activity was determined for the butyl oleate synthesis, with and without 50% v/v hexane, resulting in 650 and 120 U/g, respectively. The enzyme was also used for transesterification of soybean oil and ethanol with maximum yield of 2.4%, after 30 min of reaction.     

Mucuna pruriens Administration Minimizes Neuroinflammation and Shows Anxiolytic,Antidepressant and Slimming Effects in Obese Rats

This study evaluated the effect of Mucuna pruriens (MP) administration on neuroinflammation and behavioral and murinometric parameters in obese rats. Proximate composition, oligosaccharide and phenolic compound profile of MP were determined. Wistar adult male rats were randomized into healthy (HG) and obese group (OG). The HG consumed a control chow diet while OG consumed a cafeteria diet for eight weeks. Then, they were subdivided into: Healthy (HG); Healthy with MP administration (HGMP); Obese (OG); Obese with MP administration (OGMP), with the consumption of the respective diets remaining for another eight weeks, in addition to gavage with MP extract to supplemented groups (750 mg/kg weight). MP presented a composition rich in proteins and phenolic compounds, especially catechin, in addition to 1-kestose and levodopa. Supplementation reduced food intake, body weight, and thoracic and abdominal circumferences in obese rats. MP showed anxiolytic and antidepressant effects and reduced morphological damage and expression of interleukin 6 in the hippocampus of obese rats. MP treatment showed satietogenic, slimming, anxiolytic and antidepressant effects, besides to minimizing hippocampal neuroinflammation in obese rats. Our results demonstrated the potential anti-obesity of MP which are probably related to the high content of bioactive compounds present in this plant extract.