Graphite oxide: an efficient reagent for oxidation of alcohols under sonication

Graphite oxide (GO) was used as an effective oxidizing agent for the synthesis of aldehydes and ketones from various alcohols under ultrasonic irradiation. Under optimized conditions, quantitative yields of the products were obtained. Compared to other reagents used for the same chemical transformation, GO displays several advantages, including low cost, ease of synthesis, and high stability to ambient conditions.     

Syringe-to-syringe-dispersive liquid–phase microextraction combined with flame atomic absorption spectrometry for pre-concentration and determination of cobalt with the aid of experimental design

A rapid and selective technique has been proposed for the extraction, pre-concentration and determination of trace amounts of cobalt in water and pharmaceutical samples by syringe-to-syringe-dispersive liquid–phase microextraction (SS-DLPME) combined with flame atomic absorption spectrometry (FAAS). In the developed method, 1-nitroso-2-naphthol was used as a selective complexing agent and 1-octanol was selected as the extraction solvent. Factors such as pH of the sample solution, concentration of the complexing agent, volume of the extraction solvent, number of injections and centrifugation time affecting the extraction efficiency were screened using a Plackett–Burman design (PBD) and optimised using a Box–Behnken design (BBD). Under optimum conditions, a dynamic linear range of 2.5–650 μg L^?1 with the coefficient of determination r² = 0.997 was obtained. The resultant limit of detection (LOD) was 0.68 μg L^?1, whereas the enrichment factor (EF), intraday precision and inter-day precision were 281, 1.43% and 1.93%, respectively. This method was used successfully for pre-concentration and determination of the analyte in environmental water and drug samples.     

Synthesis,Spectroscopy, X‐ray Crystallography,and DFT Computations of Nanosized Phosphazenes

Nanoparticles of nine phosphazenes with general formula 4‐CH₃C₆H₄S(O)₂N=PX₃ [X = Cl ( A ), NC₄H₈ ( 1 ), NC₆H₁₂ ( 2 ), NC₄H₈N–C(O)OC₂H₅ ( 3 ), NC₄H₈N–C(O)OC₆H₅ ( 4 ), NC₄H₈O ( 5 ), NHCH₂–C₄H₇O ( 6 ), N(CH₃)(C₆H₁₁) ( 7 ), NHCH₂–C₆H₅ ( 8 ), and 2‐NH‐NC₅H₄ ( 9 )] were synthesized using ultrasonic method and characterized by ¹H, ¹³C, ³¹P NMR, FT‐IR, fluorescence, as well as UV/Vis spectroscopy and additionally with XRD, FE‐SEM, N₂ sorption, and elemental analysis. The ³¹P NMR spectra of compounds 1 – 9 reveal the most up field shift δ(³¹P) for 9 at –11.45 ppm reflecting the most electron donation of 2‐aminopyridinyl rings through resonance to the phosphorus atom. The ¹H, ¹³C NMR spectra of 7 exhibit two sets of signals for the hydrogen and carbon atoms of its two isomers present in the solution state in 1:4 ratio. The FE‐SEM micrographs illustrate that the nanoparticles of compounds 1 – 9 have spherical morphology and a size of 27–42 nm. From the XRD patterns, the crystal sizes were estimated to about 24–86 nm. The highest bandgap was measured for 3 (3.81 eV) whereas the smallest was measured for 8 (3.50 eV). The structures of two polymorphs of compound 5 ( 5 , 5′ ) were determined by X‐ray crystallography at 120 K. Both of these polymorphs are triclinic with P1 space group but 5 has a doubled unit cell volume and two symmetrically independent molecules ( 5a and 5b ). In structures 5a and 5′ , the phosphorus and all endocyclic atoms of two morpholinyl rings display disorder, whereas the molecule 5b does not show disorder. The strong intermolecular O–H ··· O hydrogen bonds plus weak intermolecular C–H ··· O and C–H ··· N interactions create three‐dimensional polymers in the crystalline networks of 5 and 5′ . The DFT computations illustrate that molecule 5b is more stable than 5a by –1.1062 and –0.9779 kcal · mol^–1 at B3LYP and B3PW91 levels, respectively. The NBO calculations presented sp³d hybridization for phosphorus and sulfur atoms and sp², sp³ hybrids for the nitrogen and oxygen atoms.     

A Simple Stability Indicating CZE Method for the Analysis of Octreotide Acetate

A simple stability indicating capillary zone electrophoretic method was developed and validated for the analysis of octreotide acetate (OCT-Ac). The best separation was achieved by bare fused silica capillaries (50 μm i.d.; 65.5 cm total and 57.0 cm effective length), phosphate buffer (pH = 3.25; 50 mM), at 32.5 °C. The samples were injected using 50 mbar for 5 s and subjected to the applied voltage of 27.5 kV for separation. The detection was carried out using a PAD at a wavelength of 195 nm. For improving the repeatability of the method, l-histidine was applied as an internal standard. According to the validation results, the method was linear in the concentration range of 3.30–400 μg mL^?1 (correlation coefficient of 0.9996) with a limit of detection of 1.08 μg mL^?1 and a limit of quantification of 3.30 μg mL^?1; accuracy of the method was between 100.4 ± 0.2 and 101.1 ± 0.2 %; intra-assay precision was 0.5–2.6 % and intermediate precision was 1.3–3.2 %. The proposed method was successfully applied for the quantification of OCT-Ac in both a pharmaceutical formulation and force-degraded samples and for the detection and separation of degradation products; besides, the obtained results were used for the evaluation of the degradation kinetics of OCT-Ac under different stress conditions. So, it is concluded that the developed method could be employed as a simple, accurate and precise stability-indicating method in quality control laboratories to assess the quantity and stability of OCT-Ac pharmaceutical products.     

Green synthesis of silver nanoparticles using aqueous extract of Stachys lavandulifolia flower,and their cytotoxicity,antioxidant, antibacterial and cutaneous wound‐healing properties

In a biological process where the herbal tea (Stachys lavandulifolia) aqueous extract was applied as a capping and reducing agent, nanoparticles (NPs) of silver (Ag) were synthesized. These AgNPs were characterized using Fourier transform‐infrared spectroscopy, field emission‐scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, transmission electron microscopy and ultraviolet–visible spectroscopy. The synthesized AgNPs had great cell viability dose‐dependently [investigating the effect of the plant on human umbilical vein endothelial cell line] and indicated this method was non‐toxic. In this study, the 2,2‐diphenyl‐1‐picrylhydrazyl (DPPH) free radical scavenging test was carried out to examine antioxidant properties, which revealed similar antioxidant properties for AgNPs and butylated hydroxytoluene. Agar diffusion tests were applied to determine the antibacterial characteristics. The macro‐broth tube test was run to determine minimum inhibitory concentration. All data of antibacterial and cutaneous wound‐healing examinations were analyzed by SPSS 21 software (Duncan post hoc test). AgNPs showed higher antibacterial property than all standard antibiotics (p ≤ 0.01). Also, AgNPs prevented the growth of all bacteria at 2–8 mg/ml concentrations and destroyed them at 2–16 mg/ml concentrations (p ≤ 0.01). For the in vivo experiment, after creating the cutaneous wound, the rats were randomly divided into six groups: untreated control; treatment with Eucerin basal ointment; treatment with 3% tetracycline ointment; treatment with 0.2% AgNO₃ ointment; treatment with 0.2% S. lavandulifolia ointment; and treatment with 0.2% AgNPs ointment. These groups were treated for 10 days. For histopathological and biochemical analysis of the healing trend, a 3 × 3‐cm section was prepared from all dermal thicknesses at day 10. Use of AgNPs ointment in the treatment groups substantially reduced (p ≤ 0.01) the wound area, total cells, neutrophil, macrophage and lymphocyte, and remarkably raised (p ≤ 0.01) the wound contracture, hydroxyl proline, hexosamine, hexuronic acid, fibrocyte and fibrocytes/fibroblast rate compared with other groups. Seemingly, AgNPs can be used as a medical supplement owing to their non‐cytotoxic, antioxidant, antibacterial and cutaneous wound‐healing properties.     

Functionalization of electropolished titanium surfaces with silane-based self-assembled monolayers and their application in drug delivery

This work reports a novel and reproducible route for the successful modification of the surface of titanium (Ti) with self-assembled monolayers (SAMs). By electropolishing the surface of Ti, suitable physical/chemical surface properties were obtained for adequate growth of OctadecylTrichloroSilane (OTS) based SAM. Optimum conditions to achieve a well-organized and densely packed OTS film were also determined by monitoring the effect of different parameters including time, concentration, and temperature for OTS adsorption. The optimum conditions for the formation of an OTS-SAM were found to be upon immersion of the electropolished Ti substrate in a 10mM OTS solution at 10°C for 24h. Furthermore, multiple growth regimes for the formation of OTS-SAM on electropolished Ti surface were observed. The kinetics for the self-assembly were fast at the beginning of OTS adsorption, but rapidly slowed down after 10h of immersion, i.e. during the densification process of the film at the surface of Ti. In addition, the growth behavior was found to be random as opposed to the island growth behavior usually observed with OTS at the surface of silica. The successful implementation of OTS-SAM was further investigated through the immobilization and delivery of a model drug and the OTS monolayer showed clear abilities in drug delivery with an initial burst release up to 5days followed by a sustained release up to 26days.     

Electrodeposition of Ag nanoparticles on graphenized pencil lead electrode as a sensitive and low-cost sensor for iodate determination

In this study, a simple, sensitive and low-cost iodate electrochemical sensor based on graphenized pencil lead electrode (GPLE) modified with Ag nanoparticles (AgNPs) was presented. The GPLE was simply prepared via electrochemical exfoliation of pencil lead electrode (PLE) by applying an optimized potential in acidic media. Afterward, silver nanoparticles were electrochemically deposited on the surface of GPLE using chronoamperometry technique. The fabricated electrode was carefully characterized by X-ray powder diffraction (XRD) and scanning electron microscopy (SEM) techniques. Electrochemical behavior and also the electrocatalytic performance of the modified electrode toward the reduction of iodate were studied in details using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques. The fabricated sensor responds efficiently to iodate over the concentration range of 0.05 to 75 mM with a detection limit of 0.017 mM and sensitivity of 0.26 µA µM^?1 cm^?2. Remarkably enhanced electrocatalytic performance of the modified electrode was ascribed to the synergistic effect of graphene-like nanostructures with high surface to volume ratio, excellent conductivity and also the excessive electrocatalytic behavior of silver nanoparticles. The modified electrode was successfully employed for the determination of iodate in table and sea salt samples.