Comparison of capillary electrophoresis and reversed-phase liquid chromatography for determination of the enantiomeric purity of an M3 antagonist

The chiral separation of an M3 antagonist was investigated using capillary electrophoresis (CE) with various sulfated cyclodextrins and by reversed-phase liquid chromatography with derivatized cellulose, derivatized amylose, and two protein stationary phases. Operational parameters for each technique, such as the concentration of the chiral selectors, background electrolyte (or mobile phase) pH and type, organic modifiers, injection mode and temperature were varied in order to achieve a desired elution order and to meet a 0.1% limit of quantitation (LOQ) criteria. Based on the advantages and disadvantages of each technique, a practical CE method using sulfated gamma-cyclodextrin was selected. The method was validated in terms of linearity, LOQ, accuracy, ruggedness and precision.     

European Minor Constituent Radiometer: A New Millimeter Wave Receiver for Atmospheric Research

EMCOR is a heterodyne receiver for the frequency range of 201 to 210 GHz. It has been designed for ground-based measurements of various minor constituents of the stratosphere involved in ozone chemistry. Since the aim was the detection of faint spectral lines, a superconducting tunnel junction has been chosen as mixer element and special care has been taken in developing the calibration unit of the system. The front-end is completed by a quasi-optical system, a solid state local oscillator with electronic tuning and a HEMT pre-amplifier. In the back-end an acousto-optical spectrometer is employed to analyse the signal. A PC controls the whole system. The instrument has been installed at a high mountain site in the Swiss Alps.     

How hidden are hidden processes? A primer on crypticity and entropy convergence

We investigate a stationary process's crypticity--a measure of the difference between its hidden state information and its observed information--using the causal states of computational mechanics. Here, we motivate crypticity and cryptic order as physically meaningful quantities that monitor how hidden a hidden process is. This is done by recasting previous results on the convergence of block entropy and block-state entropy in a geometric setting, one that is more intuitive and that leads to a number of new results. For example, we connect crypticity to how an observer synchronizes to a process. We show that the block-causal-state entropy is a convex function of block length. We give a complete analysis of spin chains. We present a classification scheme that surveys stationary processes in terms of their possible cryptic and Markov orders. We illustrate related entropy convergence behaviors using a new form of foliated information diagram. Finally, along the way, we provide a variety of interpretations of crypticity and cryptic order to establish their naturalness and pervasiveness. This is also a first step in developing applications in spatially extended and network dynamical systems.     

Further results on logarithmic terraces

Let p be an odd prime, and let x be a primitive root of p. Suppose that we write the elements of ${\mathbb{Z}}_{p-1}$ as $1,2,\dots ,p-1,$ and that, wherever we evaluate $x^l(\mathrm{mod}p)$, we always write it as one of $1,2,\dots ,p-1.$ Let $?=(l_1,\dots ,l_{p-1})$ be a terrace for ${\mathbb{Z}}_{p-1}$. Then $?$ is said to be a logarithmic terrace if $\mathbf{e}=(e_1,\dots ,e_{p-1})$, defined by $e_i\equiv x^{l_i}(\mathrm{mod}p)$, is also a terrace for ${\mathbb{Z}}_{p-1}$. We study properties of logarithmic terraces, in particular investigating terraces which are simultaneously logarithmic for two different primitive roots.     

Catalytic dioxygen activation by (nitro)(meso-tetrakis(2-n-methylpyridyl)porphyrinato)cobalt(III) cation derivatives electrostatically immobilized in nafion films: an experimental and DFT investigation

Complexes of the (nitro)( meso-tetrakis(2- N-methylpyridyl)porphyinato)cobalt(III) cation, [LCoTMpyP(2)(NO 2)] (4+), in which L = water or ethanol have been immobilized through ionic attraction within Nafion films (Naf). These immobilized six-coordinate species, [LCoTMPyP(2)(NO 2)/Naf], have been found to catalyze the oxidation of triphenylphosphine in ethanol solution by dioxygen, therefore retaining the capacity to activate dioxygen catalytically without an additional reducing agent as was previously observed in nonaqueous solution for the non-ionic (nitro)cobalt porphyrin analogs. Heating these immobilized six-coordinate species under vacuum conditions results in the formation of the five-coordinate nitro derivatives, [CoTMPyP(2)(NO 2)/Naf] at 85 degrees C and [CoTMPyP(2)/Naf] at 110 degrees C. The catalytic oxidation of gas-phase cyclohexene with O 2 is supported only by the resulting immobilized five-coordinate nitro complex as was previously seen with the corresponding solution-phase catalyst in dichloromethane solution. The simultaneous catalytic oxidation of triphenylphosphine and cyclohexene with O 2 in the presence of the Nafion-bound six-coordinate ethanol nitro complex is also observed; however, this process is not seen for the CoTPP derivative in dichloromethane solution. The oxidation reactions do not occur with unmodified Nafion film or with Nafion-supported [BrCo(III)TmpyP]/Naf or [Co(II)TmpyP]/Naf, indicating the necessity for the nitro/nitrosyl ligand in the oxidation mechanism. The existence of a second reactive intermediate is indicated because the two simultaneous oxidation reactions depend on two distinct oxygen atom-transfer steps having different reactivity. The absence of homogeneous cyclohexene oxidation by the six-coordinate (H 2O)CoTPP(NO 2) derivatives in the presence of Ph 3P and O 2 in dichloromethane solution indicates that the second reactive intermediate is lost by an unidentified route only in solution, implying that the immobilization of it in Nafion allows it to react with cyclohexene. Although direct observation of this species has not been achieved, a comparitive DFT study of likely intermediates in several catalytic oxidation mechanisms at the BP 6-31G* level supports the possibility that this intermediate is a peroxynitro species on the basis of relative thermodynamic accessibility. The alternate intermediates evaluated include the reduced cobalt(II) porphyrin, the dioxygen adduct cobalt(III)-O 2 (-), the oxidized cobalt(II) pi-cation radical, and the nitrito complex, cobalt(III)-ONO.     

Nickel-cysteine binding supported by phosphine chelates

The effect of chelating phosphines was tested on the structure and pH-dependent stability of nickel-cysteine binding. (1,2-Bis(diphenylphosphino)ethane (dppe) and 1,1,1-tris[(diphenylphosphino)methyl]ethane (triphos) were used with three different cysteine derivatives (L-cysteine, Cys; L-cysteine ethyl ester, CysEt; cystamine, CysAm) to prepare complexes of the form (dppe)NiCysR(n+) and (triphos)NiCysR(n+) (n = 0 for Cys; n = 1 for CysEt and CysAm). Similar 31P {1H} NMR spectra for all (dppe)NiCysRn+ confirmed their square-planar P2NiSN coordination spheres. The structure of [(dppe)NiCysAm]PF6 was also confirmed by single-crystal X-ray diffraction methods. The (triphos)NiCysAm+ and (triphos)NiCysEt+ complexes were fluxional at room temperature by 31P NMR. Upon cooling to -80 degrees C, all gave spectra consistent with a P2NiSN coordination sphere with the third phosphorus uncoordinated. Temperature-dependent 31P NMR spectra showed that a trans P-Ni-S pi interaction controlled the scrambling of the coordinated triphos. In aqueous media, (dppe)NiCys was protonated at pH approximately 4-5, leading to possible formation of a nickel-cysteinethiol and eventual cysteine loss at pH < 3. The importance of N-terminus cysteine in such complexes was demonstrated by preparing (dppe)NiCys-bead and trigonal-bipyramidal Tp*NiCys-bead complexes, where Cys-bead represents cysteine anchored to polystyrene synthesis beads and Tp*- = hydrotris(3,5-dimethylpyrazolyl)borate. Importantly, results with these heterogeneous systems demonstrated the selectivity of these nickel centers for cysteine over methionine and serine and most specifically for N-terminus cysteine. The role of Ni-S pi bonding in nickel-cysteine geometries will be discussed, including how these results suggest a mechanism for the movement of electron density from nickel onto the backbone of coordinated cysteine.     

Unimolecular thermal fragmentation of ortho-benzyne

The ortho-benzyne diradical, o-C(6)H(4) has been produced with a supersonic nozzle and its subsequent thermal decomposition has been studied. As the temperature of the nozzle is increased, the benzyne molecule fragments: o-C(6)H(4)+Delta--> products. The thermal dissociation products were identified by three experimental methods: (i) time-of-flight photoionization mass spectrometry, (ii) matrix-isolation Fourier transform infrared absorption spectroscopy, and (iii) chemical ionization mass spectrometry. At the threshold dissociation temperature, o-benzyne cleanly decomposes into acetylene and diacetylene via an apparent retro-Diels-Alder process: o-C(6)H(4)+Delta-->HC triple bond CH+HC triple bond C-C triple bond CH. The experimental Delta(rxn)H(298)(o-C(6)H(4)-->HC triple bond CH+HC triple bond C-C triple bond CH) is found to be 57+/-3 kcal mol(-1). Further experiments with the substituted benzyne, 3,6-(CH(3))(2)-o-C(6)H(2), are consistent with a retro-Diels-Alder fragmentation. But at higher nozzle temperatures, the cracking pattern becomes more complicated. To interpret these experiments, the retro-Diels-Alder fragmentation of o-benzyne has been investigated by rigorous ab initio electronic structure computations. These calculations used basis sets as large as [C(7s6p5d4f3g2h1i)H(6s5p4d3f2g1h)] (cc-pV6Z) and electron correlation treatments as extensive as full coupled cluster through triple excitations (CCSDT), in cases with a perturbative term for connected quadruples [CCSDT(Q)]. Focal point extrapolations of the computational data yield a 0 K barrier for the concerted, C(2v)-symmetric decomposition of o-benzyne, E(b)(o-C(6)H(4)-->HC triple bond CH+HC triple bond C-C triple bond CH)=88.0+/-0.5 kcal mol(-1). A barrier of this magnitude is consistent with the experimental results. A careful assessment of the thermochemistry for the high temperature fragmentation of benzene is presented: C(6)H(6)-->H+[C(6)H(5)]-->H+[o-C(6)H(4)]-->HC triple bond CH+HC triple bond C-C triple bond CH. Benzyne may be an important intermediate in the thermal decomposition of many alkylbenzenes (arenes). High engine temperatures above 1500 K may crack these alkylbenzenes to a mixture of alkyl radicals and phenyl radicals. The phenyl radicals will then dissociate first to benzyne and then to acetylene and diacetylene.     

Solvent Solubility Testing of Cosmetics-Relevant Chemicals: Methodology and Correlation of Water Solubility to In Silico Predictions

Aqueous solubility is one of the main physicochemical parameters used to assess skin absorption. As solvents have great impact on skin absorption, knowledge of chemical solubility in appropriate solvents is key to correlate in vitro skin penetration with in vivo outcomes. For example, acetone:olive oil, ethanol and dimethyl sulfoxide are all relevant to in vitro and in vivo assays. Solubility information is also needed to identify the optimal solvent for skin penetration assays. Therefore, we have measured the solubilities of 54 chemicals related to cosmetics and the reference controls for skin sensitization and genotoxicity, in five different solvents: water, DMSO, ethanol, acetone:olive oil (4:1), 5% ethanol in 0.1 mol·L^?1 phosphate buffered saline. The solubility protocol resulted in highly reproducible values, with greatest variability for poorly soluble chemicals, especially those in 0.1 mol·L^?1 PBS, which may be due to the high salt content. There was good agreement between experimental and literature values for water solubility (mean difference < twofold). A better correlation of experimental values with in silico predictions was obtained using ACD/Labs software (mean difference < fourfold, R² = 0.64) than WSKOW from EpiSuite (mean difference < eightfold, R² = 0.48). Chemicals with a log₁₀P > 2 generally exhibited a poor solubility in water but a much higher solubility in acetone:olive oil, ethanol and DMSO. These five solvents include pH effects, acceptor and donor hydrogen bonding and non-polar interactions. Thus, the solubility profile across these different solvents would help to characterize the chemicals related to their cutaneous absorption with different vehicles and their toxicity assessment.