On the influence of ion exchange on the local structure of the titanosilicate ETS-10

The effect of ion exchange with different monovalent cations (NH(4)(+), K(+), Na(+) and Cs(+)) on the local structure of the titanosilicate ETS-10 has been studied by (29)Si MAS NMR and Raman spectroscopy. Although X-ray diffraction shows no significant influence of ion exchange on the long range order, ammonium exchange is found to result in substantial damage to the local structure. Ion exchange experiments with alkali cations under significantly more acidic conditions clearly show that the structural damage brought about by ammonium exchange is not caused by the low pH of the exchange solution. The exchange with potassium and caesium ions also leads to significant changes in the (29)Si NMR and Raman spectra. However, these changes can largely be reversed by sodium back-exchange.     

Phase evolution in lithium disilicate glass-ceramics based on non-stoichiometric compositions of a multi-component system: structural studies by 29Si single and double resonance solid state NMR

The crystallization mechanism of a high-strength lithium disilicate glass-ceramic in the SiO(2)-Li(2)O-P(2)O(5)-Al(2)O(3)-K(2)O-(ZrO(2)) system, used as restorative dentistry material, has been examined on the basis of quantitative (29)Si magic angle spinning (MAS) and (29)Si{(7)Li} rotational echo double resonance (REDOR) NMR spectroscopy. Crystallization occurs in two stages: near 650 °C a significant fraction of the Q(3) units disproportionates into crystalline Li(2)SiO(3) and Q(4) units. Upon further annealing of this glass-ceramic to 850 °C the crystalline Li(2)SiO(3) phase reacts with the Q(4) units of the softened residual glass matrix, resulting in the crystallization of Li(2)Si(2)O(5). The NMR experiments provide detailed insight into the spatial distribution of the lithium ions suggesting the absence of lithium ion clustering in the residual glassy component of the final glass-ceramic. (31)P MAS-NMR spectra indicate that phosphate acts as a lithium ion scavenger, resulting in the predominant formation of orthophosphate (P(0)) and some pyrophosphate (P(1)) groups. Crystallization of Li(2)SiO(3) occurs concomitantly with the formation of a highly disordered Li(3)PO(4) phase as evidenced from strong linebroadening effects in the (31)P MAS-NMR spectra. Well-crystallized Li(3)PO(4) is only formed at annealing conditions resulting in the formation of crystalline lithium disilicate. These results argue against an epitaxial nucleation process previously proposed in the literature and rather suggest that the nucleation of both lithium metasilicate and lithium disilicate starts at the phase boundary between the disordered lithium phosphate phase and the glass matrix.     

Electrospray as a tool for drug micro- and nanoparticle patterning

Carbamazepine (CBZ) microparticles of different sizes and shapes, including spheres, q-tips, elongated spheres, and tear-shaped particles, were formed by electrospraying solutions of different CBZ concentrations. The particle characteristics were determined by the interplay between jet formation, droplet breakup, solvent evaporation, and eventual particle solidification. The average particle size increased with increasing CBZ concentration, with particles of different shapes being observed for different CBZ concentrations. The cascade of sizes and shapes observed was interpreted in terms of Rayleigh instability theory as applied to charged jets and droplets, with the final sizes depending upon the time needed to evaporate the solvent sufficiently for CBZ to solidify; the lower the initial concentration of CBZ, the smaller the final droplets/particles that are formed.     

High-pressure CO adsorption on Cu-based catalysts: Zn-induced formation of strongly bound CO monitored by ATR-IR spectroscopy

CO adsorption at 1 MPa on Cu-Zn stearate colloids and supported Cu catalysts was studied in situ by attenuated total reflection infrared (ATR-IR) spectroscopy. Subsequent to thorough reduction by H(2), the IR band at 2110-2070 cm(-1) due to linearly adsorbed CO on clean metallic Cu was always observed initially on all Cu catalysts. During the exposure of Zn-containing samples to CO at high pressure, a new IR band at ca. 1975 cm(-1) appeared in addition and increased in intensity even at room temperature. The detailed analysis of the IR spectra showed that the new IR band at ca. 1975 cm(-1) was not related to coadsorbed carbonate/formate-like species, but to the content of Zn in the samples. This IR band was found to be more stable than that at 2110-2070 cm(-1) during purging with inert gas. It disappeared quickly in synthetic air, pointing to a strongly reduced state of the Zn-containing Cu catalysts achieved during high-pressure CO exposure. It is suggested that CO can reduce ZnO to Zn in the presence of Cu, resulting in the formation of a CuZn(x) surface alloy. As the CO species with the characteristic IR band at ca. 1975 cm(-1) binds more strongly to this CuZn(x) alloy than the linearly adsorbed CO to pure Cu, it is suggested to be adsorbed on a bridge site.     

Acoustic correlates of individuality in the vocal repertoire of a nocturnal primate (Microcebus murinus)

In mammals individual distinctiveness in vocalizations provides the basis for individual recognition and thus plays an important role in social behavior. In this study, first evidence is provided for a nocturnal primate that variation in individual distinctiveness across the vocal repertoire is to some extent determined by the context and the acoustic structure of the call types. Individual distinctiveness was investigated across call types in the gray mouse lemur, a nocturnal primate, living in a dispersed multi-male multi-female social system. To explore to what degree context and acoustic structure predict variations in individual distinctiveness, four major call types were examined (grunts, tsaks, short whistles, and trills). Call types differed in context and acoustic structure and were recorded under controlled experimental conditions. A discriminant function analysis revealed that all call types are individually distinct, but not to the same degree. The findings suggest that variations in individual distinctiveness can to some extent be explained by the context and the acoustic structure of the call types.     

Masked Rhodamine Dyes of Five Principal Colors Revealed by Photolysis of a 2‐Diazo‐1‐Indanone Caging Group: Synthesis,Photophysics, and Light Microscopy Applications

Caged rhodamine dyes (Rhodamines NN) of five basic colors were synthesized and used as “hidden” markers in subdiffractional and conventional light microscopy. These masked fluorophores with a 2‐diazo‐1‐indanone group can be irreversibly photoactivated, either by irradiation with UV‐ or violet light (one‐photon process), or by exposure to intense red light (λ～750 nm; two‐photon mode). All dyes possess a very small 2‐diazoketone caging group incorporated into the 2‐diazo‐1‐indanone residue with a quaternary carbon atom (C‐3) and a spiro‐9H‐xanthene fragment. Initially they are non‐colored (pale yellow), non‐fluorescent, and absorb at λ=330–350 nm (molar extinction coefficient (ε)≈10⁴ M^?1 cm^?1) with a band edge that extends to about λ=440 nm. The absorption and emission bands of the uncaged derivatives are tunable over a wide range (λ=511–633 and 525–653 nm, respectively). The unmasked dyes are highly colored and fluorescent (ε= 3–8×10⁴ M^?1 cm^?1 and fluorescence quantum yields (?)=40–85 % in the unbound state and in methanol). By stepwise and orthogonal protection of carboxylic and sulfonic acid groups a highly water‐soluble caged red‐emitting dye with two sulfonic acid residues was prepared. Rhodamines NN were decorated with amino‐reactive N‐hydroxysuccinimidyl ester groups, applied in aqueous buffers, easily conjugated with proteins, and readily photoactivated (uncaged) with λ=375–420 nm light or intense red light (λ=775 nm). Protein conjugates with optimal degrees of labeling (3–6) were prepared and uncaged with λ=405 nm light in aqueous buffer solutions (?=20–38 %). The photochemical cleavage of the masking group generates only molecular nitrogen. Some 10–40 % of the non‐fluorescent (dark) byproducts are also formed. However, they have low absorbance and do not quench the fluorescence of the uncaged dyes. Photoactivation of the individual molecules of Rhodamines NN (e.g., due to reversible or irreversible transition to a “dark” non‐emitting state or photobleaching) provides multicolor images with subdiffractional optical resolution. The applicability of these novel caged fluorophores in super‐resolution optical microscopy is exemplified.     

Paenilamicin: Structure and Biosynthesis of a Hybrid Nonribosomal Peptide/Polyketide Antibiotic from the Bee Pathogen Paenibacillus larvae

The spore‐forming bacterium Paenibacillus larvae is the causative agent of American Foulbrood (AFB), a fatal disease of honey bees that occurs worldwide. Previously, we identified a complex hybrid nonribosomal peptide/polyketide synthesis (NRPS/PKS) gene cluster in the genome of P. larvae. Herein, we present the isolation and structure elucidation of the antibacterial and antifungal products of this gene cluster, termed paenilamicins. The unique structures of the paenilamicins give deep insight into the underlying complex hybrid NRPS/PKS biosynthetic machinery. Bee larval co‐infection assays reveal that the paenilamicins are employed by P. larvae in fighting ecological niche competitors and are not directly involved in killing the bee larvae. Their antibacterial and antifungal activities qualify the paenilamicins as attractive candidates for drug development.     

Quantification of cyclic dipeptides from cultures of Lactobacillus brevis R2Δ by HRGC/MS using stable isotope dilution assay

Lactic acid bacteria (LAB) play an important role as natural preservatives in fermented food and beverage systems, reducing the application of chemical additives. Thus, investigating their antifungal compounds, such as cyclic dipeptides, has gained prominence. Previous research has primarily focussed on isolation of these compounds. However, their precise quantification will provide further information regarding their antifungal performance in a complex system. To address this, deuterated labelled standards of the cyclic dipeptides cyclo(Leu-Pro), cyclo(Pro-Pro), cyclo(Met-Pro) and cyclo(Phe-Pro) were synthesized, and stable isotope dilution assays were developed, enabling an accurate quantification of cyclo(Leu-Pro), cyclo(Pro-Pro), cyclo(Met-Pro) and cyclo(Phe-Pro) in MRS-broth and wort. Quantitative results showed that, in the Lactobacillus brevis R2Δ fermented MRS-broth, the concentrations of cyclo(Leu-Pro), cyclo(Pro-Pro) and cyclo(Phe-Pro) were significantly higher (P?<?0.05), than in wort for cyclo (Leu-Pro) when compared with their controls. This indicates that the formation of these three cyclic dipeptides is related to L. brevis R2Δ metabolism. Furthermore, this represents the first report of cyclic dipeptides quantification using stable isotope dilution assays in LAB cultures both in vitro and in a food system.     

Mechanistic studies on the hydrolysis of a dimeric alkylzinc bis(2-pyridylmethyl)amide

Bis(2-pyridylmethyl)amine 7 reacts with selected dialkylzinc compounds to give dimeric alkylzinc bis(2-pyridylmethyl)amides 8. Regardless of the steric bulk of the alkyl substituent, dimers with central Zn₂N₂ rings are formed. Compounds 8 undergo spontaneous hydrolysis reactions upon exposure to air/moisture which can be partially controlled if the alkyl substituent R is bulky enough [R = CH(SiMe₃)₂]. A dimeric compound 9 containing both zinc-alkyl substituents and a μ-OH functionality results. In the course of this reaction, an amide instead of the expected RH is eliminated. Extensive DFT calculations show that the facile formation of a three-centered Zn[μ-(HO?H?NHR)]Zn functionality is a crucial step. Further evidence for the importance of Zn[μ-(X?H?Y)]Zn intermediates (X, Y = O and now N) in the general mechanism of hydrolysis catalyzed by binuclear zinc compounds is thus provided.     

[Ph4P][(C5H6N3O3)M(CO)5] (M = Cr,Mo, W; C5H7N3O3 = 1,3‐Dimethyl‐cyanuric Acid). Organometallic Complexes of the 1,3‐Dimethylcyanurate Ligand

1,3‐Dimethylcyanuric acid (DMCH) forms on deprotonation and reaction with TlF its thallous salt Tl[DCM] ( 2 ) which is converted to the phosphonium salt [PPh₄][DCM] ( 3 ). On the reaction with M(CO)₆, the pentacarbonylmetalate salts [Ph₄P][(DMC)M(CO)₅], M = Cr ( 4a ), Mo ( 4b ) and W ( 4c ) are obtained. IR and NMR data of 4 reveal the DMC anion ( 1 ) to have coordination properties similar to those of pyridine. The crystal structures of 4a and 4c are reported.