Electronic influences on 3J(C,H) coupling constants via -S-, -S(O)- and -SO2-: their determination, calculation and comparison of detection methods

3J(C,H) coupling constants via a sulfur atom in two series of compounds, both including a sulfide, a sulfoxide and a sulfone, were detected experimentally and calculated by quantum mechanical methods. In the first series (1-3) the coupling between a hydrogen, bonded to an sp3 carbon, and an sp2 carbon is treated; the second series (4-6) deals with the coupling between a hydrogen, bonded to an sp3 carbon, and an sp3 carbon. Different pulse sequences (broadband HMBC, SelJres, 1D HSQMBC, J-HMBC-2, selective J-resolved long-range experiment and IMPEACH-MBC) proved to be useful in determining the long-range 3J(C,H) coupling constants. However, the dynamic behaviour of two of the compounds (4 and 6) led to weighted averages of the two coupling constants expected (concerning equatorial and axial positions of the corresponding hydrogens). DFT calculations proved to be useful to calculate not only the 3J(C,H) coupling constants but also the different contributions of FC, PSO, DSO and SD terms; the calculation of the Fermi contact term (FC) was found to be sufficient for the correct estimation of 3J(C,H) coupling constants.     

Striktionseigenschaften von Regelscharen imE n

Let ={e(u)|uI} be a one-parameter family of straight lines forming a ruledC ^r-2-surface E ⁿ (n2,r1) without singular generatorse(u) (uI). As a synopsis, a generalization and an improvement of various results already known about the strictional properties of ruled surfaces E ⁿ (especially in the casen=3) the author demonstrates a uniform geometrical way of defining and uniquely obtaining thestriction point S(u) and theparameter of distribution d(u) of a generatore(u) under the minimal assumptions thate(u)E ⁿ (n2) be noncylindrical andr1. Other methods of obtainingS(u) andd(u) are discussed in comparison, and special strictional properties ofskew ruled surfaces E ⁿ are proved.

---

---

Herrn Prof. Dr. H. R. Müller zum 65. Geburtstag     

Mechanical Properties of Organic-Inorganic Hybrid Materials Determined by Indentation Techniques

The mechanical properties of hybrid materials consisting of polystyrene (PS), which was cross-linked with different proportions of the multifunctional cluster Zr₆O₄(OH)₄(methacrylate)₁₂ (Zr6) were investigated. With the help of (micro)indentation and scratch testing, the influence of the Zr6 clusters on mechanical properties, such as hardness, stiffness, creep, craze initiation, and scratch resistance was shown. There was only a slight increase in hardness and in indentation modulus with higher cluster loadings. While this observation was in agreement with the compression behaviour of the materials, the tensile properties showed a much stronger dependence on the Zr6 content. With increasing cluster loading, an increase of craze initiation stress, as determined by ball indentation experiments, was found. Performing scratch testing with constant load, a reduction of pile-up and a stronger recovery were observed for the hybrid materials compared to the neat PS. Scratch tests with a constant increase of load showed an increase of the critical load for crack opening during scratching.     

First metallamacrocyclic complexes of Pt(iv) with 3,3,3',3'-tetraalkyl-1,1'-phenylenedicarbonylbis(thioureas): synthesis by direct or electrolytic oxidative addition of I(2), Br(2) and Cl(2)

Elemental I(2) and Br(2) cleanly react with the 3:3 Pt(ii) metallamacrocycle of 3,3,3',3'-tetra(n-butyl)-1,1'-terephthaloylbis(thiourea)(cis-[Pt(II)(3)(L(p)(1)-S,O)(3)]3), in chloroform at room temperature, to yield oxidative addition products; (195)Pt NMR studies reveal that a stepwise oxidative addition readily occurs to each of the Pt(ii) centres in the metallamacrocycle to yield the mixed valence species cis-[Pt(II)(2)Pt(IV)I(2)(L(p)(1)-S,O)(3)] and cis-[Pt(II)Pt(IV)(2)I(4)(L(p)(1)-S,O)(3)], and the fully oxidised cis-[Pt(IV)(3)I(6)(L(p)(1)-S,O)(3)] in solution, depending on the mole ratio I(2):3. Similar results are obtained on treatment of solutions of 3 with elemental Br(2). Treatment of the corresponding 2:2 Pt(ii) complex of 3,3,3',3'-tetraethyl-1,1'-isophthaloylbis(thiourea)(cis-[Pt(II)(2)(L(m)(1)-S,O)(2)]4) with iodine, results in facile oxidative addition to yield cis-[Pt(IV)(2)(L(m)(1)-S,O)(2)I(4)], with a trans-Pt(iv)-iodo arrangement. Molecules in the crystal structure of 5 have their trans-Pt(iv)-iodo axes essentially aligned, with very close intermolecular iodide contacts (3.775(1)A), resulting in chains of weakly bound metallamacrocycles in the solid. An alternative electrolytic synthesis method, using a simple two-compartment glass cell containing 4 and a chosen halide salt in dichloromethane, led to the formation of cis-[Pt(IV)(2)(L(m)(1)-S,O)(2)Br(4)] 6 and cis-[Pt(IV)(2)(L(m)(1)-S,O)(2)Cl(4)] 7, completing characterization of a series of first-reported trans-Pt(iv)-X (X=I, Br, Cl) metallamacrocyclic complexes.     

Ab initio study of the substituent effects on the relative stability of the E and Z conformers of phenyl esters. Stereoelectronic effects on the reactivity of the carbonyl group

Equilibria between the Z (tau1= 0 degrees) and E (tau1= 180 degrees) conformers of p-substituted phenyl acetates 4 and trifluoroacetates 5 (X = OMe, Me, H, Cl, CN, NO2) were studied by ab initio calculations at the HF/6-31G* and MP2/6-31G* levels of theory. The preference for the Z conformer, DeltaE(HF), was calculated to be 5.36 kcal mol(-1) and 7.50 kcal mol(-1) for phenyl acetate and phenyl trifluoroacetate (i.e., with X = H), respectively. The increasing electron-withdrawing ability of the phenyl substituent X increases the preference of the Z conformer. An excellent correlation with a negative slope was observed for both series between DeltaE of the E-Z equilibrium and the Hammett sigma constant. By using an appropriate isodesmic reaction, it was shown that electron-withdrawing substituents decrease the stability of both conformers, but the effect is higher with the E conformer. Electron-withdrawing phenyl substituents decrease the delocalization of the lone pair of the ether oxygen to the C=O antibonding orbital (nO--> pi*C=O) in both the E and Z forms and in both series studied; this effect is higher in the E conformer than in the Z conformer. The nO --> pi*C=O electron donation has a minimum value with tau1= 90 degrees and a maximum value with tau1= 0 degrees (the Z conformer), the value with tau1= 180 degrees (the E conformer) being between these two values, obviously due to steric hindrance. The effects of the phenyl substituents on the reactivity of the esters studied are discussed in terms of molecular orbital interactions. ED/EW substituents adjust the availability of the pi*C=O antibonding orbital to interact with the lone pair orbital of the attacking nucleophile and therefore affect the reactivity: EW substituents increase and ED substituents decrease it. Excellent correlations were observed between the rate coefficients of nucleophilic acyl substitutions and pi*C=O occupancies of the ester series 4 and 5.     

Simultaneous determination of ondansetron and tropisetron in human plasma using HPLC with UV detection

A rapid and sensitive HPLC method for the simultaneous quantitation of ondansetron and tropisetron, two serotonin (5-HT) receptor antagonists frequently used in treatment and prevention of nausea and emesis, is described. The procedure involves liquid-liquid extraction of human plasma with dichloromethane coupled with reversed-phase HPLC and UV detection. The lower limits of quantification (LOQ) were 0.62 ng/mL for ondansetron and 1.25 ng/mL or tropisetron. Intra- and inter-assay coefficients of variation ranged from 1.5 to 7.5% and 5.3 to 13.7%, respectively. The sensitivity and precision were sufficient for determination of plasma concentrations after therapeutic administration of both drugs and the method can be used for the estimation of pharmacokinetic parameters.     

Polymerase chain reaction techniques for food allergen detection

Food allergies represent an important health problem in industrialized countries. Undeclared allergenic foods as contaminants in food products pose a major risk for sensitized persons. Reliable detection and quantification methods for food allergens are necessary to ensure compliance with food labeling and improve consumer protection. The methods currently used for the detection of potential allergens in foods are to target either the allergen itself or a marker that indicates the presence of the offending food. As markers for the presence of potentially allergenic foods or ingredients, specific proteins or DNA fragments are targeted. In routine food analysis, the enzyme-linked immunosorbent assay (ELISA) and the polymerase chain reaction (PCR) in the form of a real-time PCR or in combination with an ELISA have been used. The availability, the characteristics, and some future aspects of DNA-based methods in the rapid and sensitive detection of potentially allergenic food constituents or contaminations are discussed in this review.     

Identification de stérols à chaîne latérale oxygénée dans une éponge de l'espèce Hyrtios

Thirty-two sterols are identified in the sponge Hyrtios sp. In addition to fourteen monohydroxylated compounds, the sterol fraction contains eight functionalized sidechain sterols, three of them new: 3 β-hydroxy-24-norchol-5-en-23-al (19) , (22-trans)-3 β-hydroxycholest-5, 22-dien-24-one (20) and (22R, 23R, 24S) or (22S, 23S, 24S)- 22,23-epoxy-24-methylchoest-5-en-3 β-ol (24). The probable biological origin, rather than artifact production, of these undescribed components is discussed.     

DTA curves and non-isothermal reaction rates

Differential thermal analysis (DTA) is an effective means for studying chemical reactions, but its application to reaction kinetics is handicapped by the involvement of temperature feedback from the reaction heat and by the solvent dependence of the thermal conductivity.General, empirical relationships are derived from digital computer application which allow to transform half width and shape index of a DTA curve of any first-order process in a uniformly temperated sample to the values of the corresponding rate curve at linearly increased temperature.The expressions are complemented by some new relationships for an n-order reaction and are useful for the kinetic study of complex processes.     

Synthesis and stereochemical studies of 1- and 2-phenyl-substituted 1,3-oxazino[4,3-a]isoquinoline derivatives

Starting from the 1′- or 2′-phenyl-substituted 1-(2′-hydroxyethyl)-6,7-dimethoxy-1,2,3,4-tetrahydroisoquinoline diastereomers 3 and 6, 4-unsubstituted and 4-(p-nitrophenyl)- and 4-oxo-substituted 1-phenyl- and 2-phenyl-9,10-dimethoxy-2H,4H-1,6,7,11b-tetrahydro-1,3-oxazino[4,3-a]isoquinolines (7-12) were prepared. The relative configurations and the predominant conformations of the products were determined by NMR spectroscopy, by quantum chemical calculations and, for (2R^∗,4S^∗,11bR^∗)-9,10-dimethoxy-4-(p-nitrophenyl)-2-phenyl-2H,4H-1,6,7,11b-tetrahydro-1,3-oxazino[4,3-a]isoquinoline (11), by X-ray diffraction.