Measurements of theg J -factors of12C in the3 P 1 and3 P 2 states

Using the atomic beam magnetic resonance method the Zeeman interactions of¹²C in the³ P ₁ and³ P ₂ states at magnetic fields of about 3.4 kOe have been measured. The measured quantities areg _J (³ P ₁)?g_J(³ P ₂)=15.4(1.0)·10^?6 g _J (³ P ₂)=1.5010616 (50), from which the following value for g_J(³P₁) can be calculated:g _J (³ P ₁)=1.5010770 (50). The experimental results are in moderate agreement with theoretical calculations.     

Phase biaxiality in nematic liquid crystalline side-chain polymers of various chemical constitutions

In a previous deuterium NMR study conducted on a liquid crystalline (LC) polymer with laterally attached book-shaped molecules as the mesogenic moiety, we have revealed a biaxial nematic phase below the conventional uniaxial nematic phase (Phys. Rev. Lett. 2004, 92, 125501). To elucidate details of its formation, we here report on deuterium NMR experiments that have been conducted on different types of LC side-chain polymers as well as on mixtures with low-molar-mass mesogens. Different parameters that affect the formation of a biaxial nematic phase, such as the geometry of the attachment, the spacer length between the polymer backbone and the mesogenic unit, as well as the polymer dynamics, were investigated. Surprisingly, also polymers with terminally attached mesogens (end-on polymers) are capable of forming biaxial nematic phases if the flexible spacer is short and thus retains a coupling between the polymer backbone and the LC phase. Furthermore, the most important parameter for the formation of a biaxial nematic phase is the dynamics of the polymer backbone, as the addition of a small percentage of low molar mass LC to the biaxial nematic polymer from the original study served to shift both the glass transition and the appearance of detectable biaxiality in a very similar fashion. Plotting different parameters for the investigated systems as a function of T/Tg also reveals the crucial role of the dynamics of the polymer backbone and hence the glass transition.     

Improvement of HS-SPME for analysis of volatile organic compounds (VOC) in water samples by simultaneous direct fiber cooling and freezing of analyte solution

The sensitivity and precision of headspace solid-phase micro extraction (HS-SPME) at an analyte solution temperature (T _as) of +35 °C and a fiber temperature (T _fiber) of +5 °C were compared with those for HS-SPME at T _as and T _fiber of −20 °C for analysis of the volatile organic compounds benzene, 1,1,1-trichloroethane, trichloroethylene, toluene, o-xylene, ethylbenzene, m/p-xylene, and tetrachloroethylene in water samples. The effect of simultaneous fiber cooling and analyte solution freezing during extraction was studied. The compounds are of different hydrophobicity, with octanol/water partition coefficients (Kow) ranging from 126 and 2511. During a first set of experiments the polydimethylsiloxane (PDMS) SPME fiber was cooled to +5 °C with simultaneous heating of the aqueous analyte solution to +35 °C. During a second set of experiments, both SPME fiber holder and samples were placed in a deep freezer maintained at −20 °C for a total extraction time of 30 min. After approximately 2 min the analyte solution in the vial began to freeze from the side inwards and from the bottom upwards. After approximately 30 min the solution was completely frozen. Analysis of VOC was performed by coupling HS-SPME to gas chromatography-mass spectrometry (GC-MS). In general, i.e. except for tetrachloroethylene, the sensitivity of HS-SPME increased with increasing compound hydrophobicity at both analyte solution and fiber temperatures. At T _as of +35 °C and T _fiber of +5 °C detection limits of HS-SPME were 0.5 μg L⁻¹ for benzene, 1,1,1-trichloroethane, trichloroethylene, and tetrachloroethylene, 0.125 μg L⁻¹ for toluene, and 0.025 μg L⁻¹ for ethylbenzene, m/p-xylene, and o-xylene. In the experiments with T _as and T _fiber of −20 °C, detection limits were reduced for compounds of low hydrophobicity (Kow<501), for example benzene, toluene, 1,1,1-trichloroethane, and trichloroethylene. In the concentration range 0.5–62.5 μg L⁻¹, the sensitivity of HS-SPME was enhanced by a factor of approximately two for all compounds by performing the extraction at −20 °C. A possible explanation is that freezing of the water sample results in higher concentration of the target compounds in the residual liquid phase and gas phase (freezing-out), combined with enhanced adsorption of the compounds by the cooled fiber. The precision of HS-SPME, expressed as the relative standard deviation and the linearity of the regression lines, is increased for more hydrophobic compounds (Kow>501) by simultaneous direct fiber cooling and freezing of analyte solution. Background contamination during analysis is reduced significantly by avoiding the use of organic solvents.     

Long-term characteristics of analogical processing in high-school students with high fluid intelligence: an fMRI study

Intelligence is known to predict scholastic achievement and enables high performance in cognitive tasks. Fluid intelligence is strongly related to analogical reasoning abilities, which are fundamental to mathematical thinking. Geometric analogical reasoning is a prototypical measure of fluid intelligence. However, the cerebral correlates of geometric analogical reasoning and their developmental modulation over time are still rarely investigated. We report a 1-year follow-up functional magnetic resonance imaging study of a geometric analogical reasoning task in high fluid intelligence high-school students. This study was designed to characterise the cerebral correlates of geometric analogical reasoning and to improve our knowledge about the impact of general cognitive development on behavioural performance and on cerebral mechanisms underlying geometric analogical reasoning in adolescents. Our data indicate that a fronto-parietal network comprising the left and right parietal lobes and the left middle frontal gyrus was equally modulated by task difficulty at both measuring time points. At the behavioural level, however, participants showed improvements in performance at the second measuring time point. The behavioural improvements point to a more efficient task processing. As this is not accompanied by differential recruitment of fronto-parietal brain regions, the data suggest an increase in neural efficiency for these brain regions.     

A polynomial time approximation algorithm for the two-commodity splittable flow problem

We consider a generalization of the unsplittable maximum two-commodity flow problem on undirected graphs where each commodity ${i \in \{1, 2\}}$ can be split into a bounded number k _i of equally-sized chunks that can be routed on different paths. We show that in contrast to the single-commodity case this problem is NP-hard, and hard to approximate to within a factor of α > 1/2. We present a polynomial time 1/2-approximation algorithm for the case of uniform chunk size over both commodities and show that for even k _i and a mild cut condition it can be modified to yield an exact method. The uniform case can be used to derive a 1/4-approximation for the maximum concurrent (k ₁, k ₂)-splittable flow without chunk size restrictions for fixed demand ratios.     

Weighted Composition Operators Between Weighted Bloch Type Spaces and Weighted Banach Spaces of Holomorphic Functions

Let φ: 𝔻 → 𝔻 and ψ: 𝔻 → ? be analytic maps. They induce a weighted composition operator ψ C _φ acting between weighted Bloch type spaces and weighted Banach spaces of holomorphic functions. Under some assumptions on the weights, we give a necessary as well as a sufficient condition when such an operator is bounded resp. compact.     

Novel beta-lactam antibiotics synthesized by amination of catechols using fungal laccase

Novel cephalosporins, penicillins, and carbacephems were synthesized by amination of catechols with amino-beta-lactams like cefadroxil, amoxicillin, ampicillin and the structurally related carbacephem loracarbef using laccase from Trametes sp. All isolated monoaminated products inhibited the growth of several Gram positive bacterial strains in the agar diffusion assay, among them methicillin-resistant Staphylococcus aureus strains and vancomycin-resistant Enterococci. Observed differences in the cytotoxicity and in vivo activity in a "Staphylococcus-infected, immune suppressed mouse" model are discussed.     

X‐Tream quality assurance in synchrotron X‐ray microbeam radiation therapy

Microbeam radiation therapy (MRT) is a novel irradiation technique for brain tumours treatment currently under development at the European Synchrotron Radiation Facility in Grenoble, France. The technique is based on the spatial fractionation of a highly brilliant synchrotron X‐ray beam into an array of microbeams using a multi‐slit collimator (MSC). After promising pre‐clinical results, veterinary trials have recently commenced requiring the need for dedicated quality assurance (QA) procedures. The quality of MRT treatment demands reproducible and precise spatial fractionation of the incoming synchrotron beam. The intensity profile of the microbeams must also be quickly and quantitatively characterized prior to each treatment for comparison with that used for input to the dose‐planning calculations. The Centre for Medical Radiation Physics (University of Wollongong, Australia) has developed an X‐ray treatment monitoring system (X‐Tream) which incorporates a high‐spatial‐resolution silicon strip detector (SSD) specifically designed for MRT. In‐air measurements of the horizontal profile of the intrinsic microbeam X‐ray field in order to determine the relative intensity of each microbeam are presented, and the alignment of the MSC is also assessed. The results show that the SSD is able to resolve individual microbeams which therefore provides invaluable QA of the horizontal field size and microbeam number and shape. They also demonstrate that the SSD used in the X‐Tream system is very sensitive to any small misalignment of the MSC. In order to allow as rapid QA as possible, a fast alignment procedure of the SSD based on X‐ray imaging with a low‐intensity low‐energy beam has been developed and is presented in this publication.