Aggregation of [Cu(II)4] building blocks into [Cu(II)8] clusters or a [Cu(II)4]infinity chain through subtle chemical control

Coordination complexes of the ligand H3L [1,3-bis(3-oxo-3-phenylpropionyl)-2-hydroxy-5-methylbenzene] with Cu(II) are reported. Clusters showing various nuclearities or modes of supramolecular organization have been prepared by slightly changing the reaction conditions and have been crystallographically characterized. The reaction of H3L with one equivalent of Cu(OAc)2 in DMF yields the dinuclear complex [Cu2(HL)2(dmf)2] (1). Reaction in MeOH of H3L with an increased amount of metal, in the form of Cu(NO3)2, and excess strong base (nBu4NOH) affords the cluster [Cu8(L)2(OMe)8(NO3)2] (2). Complex 2 is a dimer of two linear [Cu4] arrays bridged by methoxide ligands, where the polynucleating ligand is fully deprotonated. The [Cu4]2 clusters are linked to each other by NO3- bridges to form one-dimensional coordination polymers. The link between [Cu8] units and their relative spatial positioning can be modified by changing the anion of the Cu(II) salt, as demonstrated by the synthesis of the cluster polymers [Cu8(L)2(OMe)8Cl2] (3) and [Cu8(L)(OMe)7.86Br2.14] (4), where only NO3- has been replaced by Cl- or Br-, respectively. Similarly, when ClO4- is used, compound [Cu8(L)2(OMe)8(ClO4)2(MeOH)4] (5) can be isolated. It contains independent [Cu8] units. A slight change in the stoichiometry of the reaction leading to 2 affords the related complex catena-[Cu4(L)(OMe)3(NO3)2(H2O)0.36] (6). This polymer contains essentially the same [Cu4] moiety as 2, albeit organized in a completely different arrangement. Each [Cu4] unit in 6 is linked by OMe- ligands to two such equivalent groups to form an infinite chain. Magnetic susceptibility measurements reveal weak antiferromagnetic exchange between Cu(II) centers in 1 (J = -0.73 cm(-1)) and strong antiferromagnetic coupling within [Cu4] chains in 2, 5, and 6 (most negative J values of -113.8 and -177.3 cm(-1) for 2 and 6, respectively).     

Molecular volume calculation using AM1 semi-empirical method toward diffusion coefficients and electrophoretic mobility estimates in aqueous solution

Diffusion coefficients and electrophoretic mobility are two important physicochemical parameters used in mass transport phenomenon studies. The volume of the solute is required to determine or estimate these parameters. Classical methods, such as the LeBas method are commonly used. However, although valid, this method may represent a boring and time-consuming task, depending on the nature and number of compounds to be calculated. In this study, the volumes of a series of neutral and charged substances of the main functional groups present in organic molecules, amino acids, drugs and diverse compounds, such as cytosine and glucose, were calculated according to the LeBas method (V_M) and the AM1 semi-empirical method, V_W(AM1). The latter showed to be statistically coincident with the former. Employed as a pure value or corrected by the LeBas molar volume, the AM1 molecular volume was also demonstrated to estimate the diffusion coefficients in infinite aqueous dilution within an acceptable average error, according to the Othmer–Thakar, Wilke–Chang and Hayduk–Laudie methods, as well as the electrophoretic mobility of charged substances, such as carboxylates and protonated amines. According to these results, the AM1 method was seen to be statistically valid to calculate molecular volume. Many advantages in the construction of most diverse structures were noted, as well as a reduction in time and an increase in the quality of the information, when run on molecular modeling software.     

Diastereoselective synthesis of substituted 2,3,4,5‐tetrahydro‐1H‐1‐benzazepine‐5‐carboxylic esters by a tandem reduction‐reductive animation reaction

An efficient, diastereoselective synthesis of substituted and unsubstituted 2,3,4,5‐tetrahydro‐1H‐1‐benzazepine‐5‐carboxylic esters has been developed based on the tandem reduction‐reductive amination reac tion. Catalytic hydrogenation of a series of 2‐(2‐nitrophenyl)‐5‐oxoalkanoic esters initiates a reaction sequence involving (1) reduction of the aromatic nitro group, (2) condensation of the N‐hydroxylamino (or amino) nitrogen with the side chain carbonyl, and (3) reduction of the seven‐membered cyclic imine. Cyclizations that produce 2‐alkyl‐2,3,4,5‐tetrahydro‐1H‐1‐benzazepine‐5‐carboxylic esters are diastereose lective for the product having the C2 alkyl and the C5 ester groups cis. In these reactions, the transannular ester group exerts a strong stereodirecting effect on the reduction of the cyclic imine intermediate, though not as strong as that observed in previous closures of 2‐alkyl‐1,2,3,4‐tetrahydroquinoline‐4‐carboxylic esters. This decrease in diastereoselectivity is attributed to (1) the greater distance between the ester and the imine double bond and (2) the increased conformational mobility of the larger ring, both of which diminish the stereodirecting effect of the ester. Finally, formation of the seven‐membered ring is sufficiently slow that reaction with the side chain ester group competes with heterocycle formation in several of the reactions.     

Negative- and positive-ion chemical ionization mass spectra of aromatic amines: Surface-assisted reactions involving oxygen

The O₂–N₂ and O₂–Ar negative-ion chemical ionization mass spectra of aromatic amines show a series of unusual ions dominated by an addition appearing at [M + 14]^?˙. Other ions are observed at [M – 12]^?˙, [M + 5]^?˙, [M + 12]^?˙, [M + 28]^?˙ and [M + 30]^?˙. Ion formation was studied using a quadrupole instrument equipped with a conventional chemical ionization source and a Fourier transform ion cyclotron resonance (FTICR) mass spectrometer. These studies, which included the examination of ion chromatograms, measurement of positive-ion chemical ionization mass spectra, variation of ion source temperature and pressure and experiments with ¹⁸O₂, indicate that the [M + 14]^?˙ ion is formed by the electron-capture ionization of analytes altered by surfaceassisted reactions involving oxygen. This conversion is also observed under low-pressure conditions following source pretreatment with O₂. Experiments with [¹⁵N]aniline, [2,3,4,5,6-²H₅] aniline and [¹³C₆]aniline show that the [M + 14]^?˙ ion corresponds to [M + O ? 2H]^?˙, resulting from conversion of the amino group to a nitroso group. Additional ions in the spectra of aromatic amines also result from surface-assisted oxidation reactions, including oxidation of the amino group to a nitro group, oxidation and cleavage of the aromatic ring and, at higher analyte concentrations, intermolecular oxidation reactions.     

Reactions of Lewis bases with tetrakisdiphenylamide uranium(IV)

The coordinatively unsaturated uranium(IV) complex U[N(C₆H₅)₂]₄ has been prepared via the stoichiometric reaction of diphenylamine with [(Me₃Si)₂N]₂ H₂. U[N(C₆H₅)₂]₄ coordinates Lewis bases such as Et₂O, THF, pyridine or (EtO)₃PO, based on electronic absorption spectroscopy and ¹H NMR studies. Exchange between U[N(C₆H₅)₂]₄ and U[N(C₆H₅)₂]₄(L), where L is THF or pyridine, is rapid on the NMR time-scale between 307 and 323 K. Measurement of equilibrium constants for L = THF provides ΔH and ΔS values of −60 kJ mol⁻¹ and −1.8 × 10² J K⁻¹ mol⁻¹, respectively. U[N(C₆H₅)₂]₄ coordinates and binds (EtO)₃PO much more tightly (K_eq = & > 10⁴ M⁻¹) than THF or pyridine with the exchange rate between U[N(C₆H₅)₂]₄ and U[N(C₆H₅)₂]₄[OP(OEt)₃] being close to the NMR time-scale.     

Trace fluoride determination with specific ion electrode

A method is described for determining 10^-5–10^-4M fluoride in a variety of solutions potentiometrically with a fluoridc-specific electrode, by a standard addition method. Any change of ionic strength or the nature of the solution that might alter activity coefficients or junction potentials is minimized. The relationship between potential and fluoride concentration thus follows the Nernst equation, and the unknown concentration can be calculated. Experimental data are given for solutions of sodium choride, sodium nitrate, acidified sodium silicate and sodium hydroxide, lithium chloride, and phosphoric acid. Metal ions (e.g., Al³⁺, UO₂²⁺, Fe³⁺, Th⁴⁺) that interfere by forming complexes with fluoride can be precomplexed with phosphoric acid. The relative error is estimated at 10%, and the relative standard deviation is less than 5% over the concentration range 10^-5–10^-4M fluoride.     

Ammonium cyanate shows N-H...N hydrogen bonding, not N-H...O

The transformation of ammonium cyanate into urea, first studied over 170 years ago by W?hler and Liebig, has an important place in the history of chemistry. To understand the nature of this solid state reaction, knowledge of the crystal structure of ammonium cyanate is a prerequisite. Employing neutron powder diffraction, we demonstrate conclusively that, in the structure of ammonium cyanate, the NH(4)(+) cation forms N-H...N hydrogen bonds to four cyanate N atoms at alternate corners of a distorted cube, rather than our previously proposed alternative arrangement with N-H...O hydrogen bonds to cyanate O atoms at the other four corners.     

Fused‐ring nitrogen and sulfur heterocycles by a tandem SN2‐michael addition reaction

A tandem S_N2‐Michael addition reaction has been developed for the synthesis of cis‐ and trans‐fused nitrogen and sulfur heterocycles from the cis and trans isomers of ethyl (±)‐(2E)‐3‐[2‐(iodomethyl)cyclo‐hexyl]‐2‐propenoate. Octahydro‐1H‐isoindole‐1‐acetic acid and octahydrobenzo[c]thiophene‐1‐acetic acid derivatives have been prepared and their stereochemistries elucidated using NMR and X‐ray crystallo‐graphic methods. Cyclization substrates for both the cis‐ and the trans‐fused rings are readily available in four steps from known compounds. Yields for the cyclization range from 80‐85% and stereochemical selec‐tivities with respect to the side chain vary from 12.5‐16:1 for the cis‐fused structures to 6‐7.5:1 for the trans‐fused structures. Steric interactions in the transition states for ring closure are proposed to rationalize the observed preferences.     

The synthesis,characterization and melting properties of thiophene-containing dithiocarboxylate complexes of nickel(II)

The reactions of a series of 5-alkyl-2-thiophenedithiocarboxylates with nickel(II) chloride afforded two types of complexes, blue nickel(II) complexes with two terminal dithiocarboxylate ligands, [Ni(S₂CTR)₂] and violet nickel(II) complexes with perthio- and dithiocarboxylate ligands, [Ni(S₂CTR)(S₃CTR)] (where T = 2,5-disubstituted thiophene, R = C_nH_2n+1, n = 4, 6, 8, 12, 16). The blue monomers are preferred for the shorter chains (C₄ and C₆) and the violet compounds form exclusively for the longer chains (C₈, C₁₂, and C₁₆) in the alkylthiophene complexes. In addition to the above series, [Ni(S₂CTCH₃)₂], was prepared in a one-pot reaction in THF and both the blue and violet products were isolated. It was possible to convert the blue complexes [Ni(S₂CTR)₂] (R = butyl, hexyl) into the corresponding violet complexes [Ni(S₂CTR)(S₃CTR)] after stirring in THF solutions for prolonged periods of time. Liquid-crystalline properties of these complexes were examined by DSC and POM. The violet complexes with C₈ and C₁₂ alkyl chains showed liquid-crystalline properties.     

Automatic ignition of the sample vs. use of the bunsen burner in the rapid silver absorbent method for sulfur

Summary Comparable series of sulfur determinations by the silver absorbent method were performed on four test samples. One series was carried out with automatic ignition using a stationary electric sample burner during a constant time period for each analysis; the other series by igniting the sample with a Bunsen burner held in the hand until the last trace of sample disappeared.There was no obviously assured difference in the quality of the analytical figures obtained by the two methods of sample ignition. Statistical analysis of the data, however, disclosed that the automatic burner did actually give a slight improvement in precision over the hand burner although the ultimate limit of accuracy was the same in each case.

---

Zusammenfassung Mit vier reinen Verbindungen wurden Reihenbestimmungen des Schwefels durch Verbrennung und Absorption des Schwefeltrioxyds an Silberwolle so ausgeführt, daß eine Reihe von Verbrennungen mit dem von Hand geführten Bunsenbrenner immer einer entsprechenden Reihe von Bestimmungen gegenübergestellt werden konnte, bei der die Verbrennung mit einem ruhenden, automatisch regulierten elektrischen Heizkörper erfolgte.Die Resultate der automatischen Verbrennungen zeigten eine so geringe Verbesserung gegenüber jenen, die durch Verbrennung mit dem handregulierten Bunsenbrenner erhalten wurden, daß der augenscheinliche Unterschied lediglich dem Zufall zugeschrieben werden könnte. Eine statistische Untersuchung zeigte, daß die automatische Verbrennung tatsächlich eine geringfügige Verbesserung der Präzision gibt, ohne jedoch die Genauigkeit der arithmetischen Mittel der Versuchsreihen merkbar zu ändern.

---

Résumé On a effectué des déterminations de soufre en séries comparables par la méthode d'absorption par l'argent sur quatre échantillons types. L'une des séries comportait une combustion automatique à l'aide d'un brûleur électrique fixe pendant un temps constant pour chaque analyse. L'autre série comportait l'emploi d'un becBunsen conduit à la main pour la combustion de l'échantillon jusqu'à disparition de ses dernières traces.On n'a constaté aucune différence marquée dans la qualité des résultats analytiques obtenus par l'une ou l'autre méthode de combustion de l'échantillon. L'analyse statistique des résultats obtenus fait cependant apparaître une légère amélioration de la précision lorsque le brûleur automatique est substitué au brûleur à main bien que les écarts extrêmes obtenus soient les mêmes pour chacun des cas.

---

---

To Prof. Dr.Hans Lieb at his 70th birthday.