Automatic flow procedure for the determination of ethanol in wine exploiting multicommutation and enzymatic reaction with detection by chemiluminescence

An automatic procedure for the determination of ethanol in wines using a flow system based on multicommutation and enzymatic reaction is described. Alcohol oxidase was immobilized on aminopropyl glass beads and packed in an acrylic column. The peroxide due to enzymatic reaction with ethanol reacted with luminol and generated the chemiluminescence radiation that was monitored by using a laboratory-made detector based on photodiodes. The system manifold comprised a set of 3-way solenoid valves controlled by a microcomputer furnished with electronic interfaces, which ran on software written in Quick BASIC 4.5 to provide facilities to perform on-line sample dilution, reagent addition, and data acquisition. After system parameters optimization, ethanol samples were processed without prior pretreatment. The following suitable features were achieved: linear response ranging from 2.5 to 25% (v/v) ethanol, relative standard deviation of 1.8% (n = 10), detection limit of 0.3% (v/v) ethanol, sampling rate of 23 determinations per hour, and low reagent consumption of 0.23 mg luminol and 7 mg hexacyanoferrate (III) per determination. When the results were compared with those obtained using the AOAC Official Method, no significant difference at the 90% confidence level was observed.     

Automatic ignition of the sample vs. use of the bunsen burner in the rapid silver absorbent method for sulfur

Summary Comparable series of sulfur determinations by the silver absorbent method were performed on four test samples. One series was carried out with automatic ignition using a stationary electric sample burner during a constant time period for each analysis; the other series by igniting the sample with a Bunsen burner held in the hand until the last trace of sample disappeared.There was no obviously assured difference in the quality of the analytical figures obtained by the two methods of sample ignition. Statistical analysis of the data, however, disclosed that the automatic burner did actually give a slight improvement in precision over the hand burner although the ultimate limit of accuracy was the same in each case.

---

Zusammenfassung Mit vier reinen Verbindungen wurden Reihenbestimmungen des Schwefels durch Verbrennung und Absorption des Schwefeltrioxyds an Silberwolle so ausgeführt, daß eine Reihe von Verbrennungen mit dem von Hand geführten Bunsenbrenner immer einer entsprechenden Reihe von Bestimmungen gegenübergestellt werden konnte, bei der die Verbrennung mit einem ruhenden, automatisch regulierten elektrischen Heizkörper erfolgte.Die Resultate der automatischen Verbrennungen zeigten eine so geringe Verbesserung gegenüber jenen, die durch Verbrennung mit dem handregulierten Bunsenbrenner erhalten wurden, daß der augenscheinliche Unterschied lediglich dem Zufall zugeschrieben werden könnte. Eine statistische Untersuchung zeigte, daß die automatische Verbrennung tatsächlich eine geringfügige Verbesserung der Präzision gibt, ohne jedoch die Genauigkeit der arithmetischen Mittel der Versuchsreihen merkbar zu ändern.

---

Résumé On a effectué des déterminations de soufre en séries comparables par la méthode d'absorption par l'argent sur quatre échantillons types. L'une des séries comportait une combustion automatique à l'aide d'un brûleur électrique fixe pendant un temps constant pour chaque analyse. L'autre série comportait l'emploi d'un becBunsen conduit à la main pour la combustion de l'échantillon jusqu'à disparition de ses dernières traces.On n'a constaté aucune différence marquée dans la qualité des résultats analytiques obtenus par l'une ou l'autre méthode de combustion de l'échantillon. L'analyse statistique des résultats obtenus fait cependant apparaître une légère amélioration de la précision lorsque le brûleur automatique est substitué au brûleur à main bien que les écarts extrêmes obtenus soient les mêmes pour chacun des cas.

---

---

To Prof. Dr.Hans Lieb at his 70th birthday.     

On solving sparse band systems with three algorithms of the ABS family

In this paper, we examine three algorithms in the ABS family and consider their storage requirements on sparse band systems. It is shown that, when using the implicit Cholesky algorithm on a band matrix with band width 2q+1, onlyq additional vectors are required. Indeed, for any matrix with upper band widthq, onlyq additional vectors are needed. More generally, ifa _kj 0,j>k, then thejth row ofH _i is effectively nonzero ifj>i>k. The arithmetic operations involved in solving a band matrix by this method are dominated by (1/2)n ² q. Special results are obtained forq-band tridiagonal matrices and cyclic band matrices.The implicit Cholesky algorithm may require pivoting if the matrixA does not possess positive-definite principal minors, so two further algorithms were considered that do not require this property. When using the implicit QR algorithm, a matrix with band widthq needs at most 2q additional vectors. Similar results forq-band tridiagonal matrices and cyclic band matrices are obtained.For the symmetric Huang algorithm, a matrix with band widthq requiresq–1 additional vectors. The storage required forq-band tridiagonal matrices and cyclic band matrices are again analyzed.This work was undertaken during the visit of Dr. J. Abaffy to Hatfield Polytechnic, sponsored by SERC Grant No. GR/E-07760.     

A new synthesis of platinum—carbon bonds

Syntheses of cis-[PtCl(CH₂COCH₃)(PEt₃)₂], cis-[PtCl(CH₂NO₂) (PEt₃)₂], and trans-[Pt(CCPh)₂ (PEt₃)₂] are described. The procedure involves reaction of cis-[PtCl₂(PEt₃)₂] with Ag₂O and acidic CH bonds to precipitate AgC1 and generate a PtC bond. The method may represent a new general route to platinum—carbon bonds.     

A novel effective electrophile: β-trifluoroacetylketene diphenyldithioacetal S,S-tetroxide

A synthesis of a novel electrophilic reagent--β-trifluoroacetylketene diphenyldithioacetal S,S-tetroxide 3 is described. The reaction of 3 with various electron-rich aromatics such as 1,3-dimethoxybenzene, 2-methylthiophene, N-methylpyrrole, and 2-methylindole was investigated. In the course of these reactions an unusual migration of a phenylsulfonyl group takes place. An easy and ready for scale-up procedure for the synthesis of previously unknown β-aryl, α-phenylsulphonyl substituted α,β-unsaturated trifluoromethyl ketones is reported.     

New advancements in SERS dye detection using interfaced SEM and Raman spectromicroscopy (μRS)

In the past decade Surface Enhanced Raman Scattering (SERS) has emerged as a powerful technique for the analysis of artistic, historical and archaeological material culture. However, the identification of organic compounds in complex samples using SERS can be challenging owing to the complexity in optimizing the adsorption of target analytes onto the plasmonic substrate and the difficulty to identify proper areas on the sample for robust SERS analysis using optical systems. Scanning electron microscopy (SEM) interfaced with Raman spectromicroscopy (μRS) provides an ideal hyphenated system to overcome the last challenge by: (1) evaluating the nanoparticles coverage/distribution on the sample and (2) locating suitable areas for successful and reproducible SERS analysis. In this paper we demonstrate the potential of a system interfacing SEM and μRS for single fiber, extractionless analysis in the characterization of dyes from reference collections and archaeological textiles. Copyright © 2015 John Wiley & Sons, Ltd.     

A method for C(alpha) direct-detection in protonless NMR

Attempts are made to efficiently decouple (13)C nuclei without significant loss of coherence during the application of the decoupling package. Such attempts are based on the S(3)E spin-state selection method. A newly developed double S(3)E (DS(3)E) is particularly efficient for C(alpha) detection for proteins as large as 480 kDa.     

Integration of quantitative DCE-MRI and ADC mapping to monitor treatment response in human breast cancer: initial results

PURPOSE: The objective of this study was to assess changes in the water apparent diffusion coefficient (ADC) and in pharmacokinetic parameters obtained from the fast-exchange regime (FXR) modeling of dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) during neoadjuvant chemotherapy in breast cancer. MATERIALS AND METHODS: Eleven patients with locally advanced breast cancer underwent MRI examination prior to and after chemotherapy but prior to surgery. A 1.5-T scanner was used to obtain T1, ADC and DCE-MRI data. DCE-MRI data were analyzed by the FXR model returning estimates of K(trans) (volume transfer constant), v(e) (extravascular extracellular volume fraction) and tau(i) (average intracellular water lifetime). Histogram and correlation analyses assessed parameter changes post-treatment. RESULTS: Significant (P < .05) changes or trends towards significance (P < .10) were seen in all parameters except tau(i), although there was qualitative reduction in tau(i) values post-treatment. In particular, there was reduction (P < .035) in voxels with K(trans) values in the range 0.2-0.5 min(-1) and a decrease (P < .05) in voxels with ADC values in the range 0.99 x 10(-3) to 1.35 x 10(-3) mm2/s. ADC and v(e) were negatively correlated (r = -.60, P < .02). Parameters sensitive to water distribution and geometry (T(1), v(e), tau(i) and ADC) correlated with a multivariable linear regression model. CONCLUSION: The analysis presented here is sensitive to longitudinal changes in breast tumor status; K(trans) and ADC are most sensitive to these changes. Relationships between parameters provide information on water distribution and geometry in the tumor environment.     

Dendritic analogues of engineering plastics - a general one-step synthesis of dendritic polyaryl ethers

The first general single-step route to dendritic or cascade polyaryl ethers analogous to common linear polyaryl ethers is described. The sodium salts of four AB₂ monomers each containing a single phenolic hydroxyl group and two aryl fluorides activated toward nucleophilic substitution by carbonyl, sulphonyl, or tetrafluorophenyl moieties are shown to polymerize in hot N, N-dimethylacetamide. The products are high molecular weight polymers (7000 < M_n < 36000), have narrow polydispersities (1.50 < M_w/M_n < 4.50), and are highly soluble in organic solvents. The molecular weights of two of the polymers increase with monomer concentration. The polymers are thermally stable (500 °C under N₂) and have glass transition temperatures ranging from 135 to 231 °C.