Investigation of hard magnetic properties in the Fe-Pt system by combinatorial deposition of thin film multilayer libraries

The magnetic properties of annealed Fe-Pt multilayer thin films with a broad composition range were investigated in order to identify the effects of composition and annealing temperature on the achievable coercive field, and to identify its maximum at low processing temperatures. Two types of multilayer systems were deposited as materials libraries to vary the composition from Fe₂₀Pt₈₀ to Fe₇₅Pt₂₅. The first type of multilayer was comprised of alternating opposing wedges, whereas the second type consisted of repeated uniform Fe and Pt layers interspersed periodically with Fe wedge layers. It was found that coercive fields μ₀H_C > 0.7 T can be achieved at an annealing temperature of about 300 °C (60 min) for both types of multilayers as long as the composition is close to 50:50. Higher annealing temperatures are needed for films, which deviate from this composition. Increasing the annealing temperature up to 700 °C leads to increased coercivity values. Multilayers with additional Fe layers showed increased remanence but reduced coercive fields.     

Electron beam induced modification of poly(ethylene terephthalate) films

Electron beam processing of poly(ethylene terephthalate) (PET) films is found to promote significant changes in the melting heat, intrinsic viscosity and polymer film-liquid (water, isooctane and toluene) boundary surface tension. These properties are featured with several maximums depending on the absorbed dose and correlating with the modification of PET surface functionality. Studies using adsorption of acid-base indicators and IR-spectroscopy revealed that the increase of PET surface hydrophilicity is determined by the oxidation of methylene and methyne groups. Electron beam treatment of PET films on the surface of N-vinylpyrrolidone aqueous solution provided graft copolymerization with this comonomer at optimum process parameters (energy 700 keV, current 1 mA, absorbed dose 50 kGy).     

Analysis of reflectance and modulation spectroscopic lineshapes in optoelectronic device structures

We discuss the spectral lineshapes of reflectance and modulated reflectance (MR) measurements on optoelectronic device structures such as epi-layers, quantum wells (QWs), vertical-cavity surface emitting-lasers (VCSELs) and resonant-cavity light-emitting diodes (RCLEDs). We consider the various methods for the extraction of built-in electric fields and band-gap energies from Franz-Keldysh oscillations (FKO), using the example of a tensilely strained InGaAs QW system, whose InGaAsP barriers yield strong FKO. We describe how critical point transition energies can be easily obtained by eye from Kramers-Kronig (KK) transforms of low field or QW modulation spectra, using the example of the modulated transmittance spectra of dilute-nitrogen InGaAsN p-i-n structures. We also discuss how the ordinary reflectivity spectrum, usually acquired at the same time as the MR signal, may also be exploited to extract layer thicknesses and compositions, and information about the active QW absorption spectrum in VCSEL and RCLED structures.     

Annealing effect on soft magnetic properties and magnetoimpedance of Finemet Fe73.5Si13.5B9Nb3Au1 alloy

Effect of annealing on the soft magnetic properties of Fe_73.5Si_13.5B₉Nb₃Au₁ amorphous ribbon has been investigated by means of structure examination, magnetoimpedance ratio (MIR) and incremental permeability ratio (PR) spectra measured in the frequency range of 1–10 MHz at a fixed current of 10 mA X-ray diffraction analysis showed that the as-cast sample was amorphous and it became nanocrystalline under a proper heat treatment. When annealing amorphous alloy at 530 °C for 30, 60, 90 min, soft magnetic properties have been improved drastically. Among the samples investigated, the sample annealed at 530 °C for 90 min showed the softest magnetic behavior. The MIR and PR curves revealed the desirable changes in anisotropy field depending upon annealing.     

Electronic structure of Ti metal and TiO2 powder studied by hard and soft (Cu Kα1 and Al Kα1) X-ray photoelectron and Auger spectroscopy

High-energy X-ray photoelectron spectroscopy (XPS) is of particular importance for minimizing the effects of surface contamination by increasing photoelectron escape depths. In this study high-resolution high-energy Cu Kα₁ and soft Al Kα₁ XPS and Auger electron spectroscopy were used to compare the electronic structure of Ti in TiO₂ powder and Ti metal. The Ti 1s in TiO₂ XPS line is narrower and more symmetric than in Ti metal. A comparison of the relative intensities of the L₂₃M₂₃M₄₅ and L₂₃M₂₃M₂₃ Auger transitions in Ti metal and TiO₂ is consistent with the expected transfer of Ti 3d electrons away from the Ti site in the oxide. The satellites accompanying the Ti 1s XPS line excited by Cu Kα₁ X-rays occur at the same energies as the satellites accompanying the Ti 2s and 2p XPS lines excited by Al Kα₁ X-rays indicating that they do not depend on the core-level, the experimental resolution or inelastic scattering processes.     

The statement and numerical solution of an optimization problem in X-ray tomography

A nonclassical problem is considered for the transport equation with coefficients depending on the energy of radiation. The task is to find the discontinuity surfaces for the coefficients of the equation from measurements of the radiation flux leaving the medium. For this tomography problem, an optimization problem is stated and numerically analyzed. The latter consists in determining the radiation energy that ensures the best reconstruction of the unknown medium. A simplified optimization problem is solved analytically.     

Properties of<Emphasis Type="Italic">B</Emphasis><Subscript>c</Subscript> meson

The mass spectrum ofcb meson is investigated with an effective quark-antiquark potential of the form -α_c/r +Ar ^νwith ν varying from 0.5 to 2.0. TheS andP-wave masses, pseudoscalar decay constant, weak decay partial widths in spectator model and the lifetime ofB _cmeson are computed. The properties calculated here are found to be in good agreement with other theoretical and experimental values at potential index,ν = 1     

On some properties of linear and nonlinear waves in pair-ion plasmas

It is pointed out that the observation of the electrostatic ion acoustic wave frequency can be a suitable check to determine whether the produced plasma is a pure pair-ion plasma or whether it comprises some concentration of electrons. A theoretical model for the pair-ion plasma dynamics is presented along with a new electrostatic mode which can exist only in such systems. It can become unstable in the presence of shear flow and it can give rise to vortex structures in the nonlinear regime. The possibility of shocks and solitons, due to nonlinear drift waves in a pair-ion plasma comprising electrons, is also discussed. The relevance of this investigation to both laboratory and astrophysical plasmas is pointed out.     

The promoting role of silver on the supported silver salt of dodecatungstosiliticic acid in the methanol-to-hydrocarbon conversion

The conversion of methanol into light olefins has been studied using the silver salt of dodecatungstosilicic acid supported on serosil. Special attention has been paid to the process of the acid sites formation during the initial reaction period and to the role of hydrogen. The significantly higher activity and stability of the supported silver salt compared with the supported free heteropoly acid is explained by a controlled formation process of acidic sites and their additional generation from hydrogen on the metallic silver surface.     

A graphical approach to computing Selmer groups of congruent number curves

Let E _n:y ²=x ³−n ² x denote the family of congruent number elliptic curves. Feng and Xiong (2004) equate the nontriviality of the Selmer groups associated with E _n to the presence of certain types of partitions of graphs associated with the prime factorization of n. In this paper, we extend the ideas of Feng and Xiong in order to compute the Selmer groups of E _n. 2000 Mathematics Subject Classification Primary—11G05; Secondary—14H52, 14H25, 05C90