Decomposition of Gaseous Sulfide Compounds in Air by Pulsed Corona Discharge

The effectiveness of applying a pulsed corona discharge to the destruction of olfactory pollution in air was investigated. This paper presents a comparative study of the decomposition of three representative sulfide compounds in diluted concentrations: hydrogen sulfide (H₂S), dimethyl sulfide (DMS), and ethanethiol (C₂H₅SH), which could be completely removed when a sufficient but reasonable energy density was deposited in the gas. DMS showed the lowest energy cost (around 30 eV/molecules); C₂H₅SH and H₂S had an EC of respectively 45 eV and 115 eV. The efficiency of the non-thermal plasma process increased with decreasing the initial concentration of sulfide compounds, while the energy yield remained almost unchanged. SO₂ was the only identified byproduct of H₂S decomposition, but the sulfur balance suggests the formation of undetected SO₃. The byproducts analyzed during the degradation of DMS and C₂H₅SH enabled to propose a reaction mechanism, starting with radical attack and breaking of C–S bonds.     

Colorimetric determination of palladium (II) by means of promazine hydrochloride

In acetate buffer medium palladium(II) ions form with promazine hydrochloride (PM) two complexes: an orange one of a formula [Pd(C₁₇H₂₀N₂S)]²⁺ (λ_max = 460 nm, ε = 4.5 × 10³, at 20 °C and pH = 2) and a violet one of a formula [Pd(C₁₇H₂₀N₂S)₂]²⁺ (λ_max = 540 nm, ε = 8.8 × 10³ at 20 °C and pH = 2).The values for instability constants determined by Bjerrum's method amount to pK₁ = 3.95; pK₂ = 3.07; pβ₁ = 3.95; pβ₂ = 7.02, respectively.A colorimetric method of the determination of palladium(II) has been elaborated. The method consists in a measurement of the absorbance of the violet complex of palladium(II) with promazine hydrochloride at λ = 540 nm. The method permits the determination of 2–17 μg Pd/ml with an error of ±2%. The time of the determination is 20 min. Iron(III), Ce(IV), Pt(IV), V(V), Cr(VI), and HNO₃ interfere with the determination.     

Tetraalkylammonium Picrates in the Dichloromethane–Water System: Ion-Pair Formation and Liquid–Liquid Distribution of Free Ions and Ion Pairs

Equilibria concerning picrates of tetraalkylammonium ions (Me₄N⁺, Et₄N⁺, Pr₄N⁺, Bu₄N⁺, Bu₃MeN⁺) in a dichloromethane−water system have been investigated at 25 ^∘C. The 1:1 ion-pair formation constants (K _IP,o ^o) in dichloromethane at infinite dilution were conductometrically determined. The distribution constants (K _D ^o) of the ion pairs and the free cations between the solvents were determined by a batch-extraction method. The K _IP,o ^o value varies in the cation sequence, Bu₄N⁺ ≈ Pr₄N⁺ ≈ Et₄N⁺ < Bu₃MeN⁺ < < Me₄N⁺; this trend is explained by the electrostatic cation−anion interaction taking into account the structures of the ion pairs determined by density functional theory calculations. For the ion pairs of the symmetric R₄N⁺ cations, there is a linear positive relationship between log₁₀ K _D ^o and the number of methylene groups in the cation (N _{CH 2}). The ion pair of asymmetric Bu₃MeN⁺ has a higher distribution constant than that expected from the above log₁₀ K _D ^o versus N _{CH 2} relationship. These cation dependencies of log₁₀ K _D ^o for the ion pairs are explained theoretically by using the Hildebrand-Scatchard equation. For all the cations, the log₁₀ K _D ^o value of the free cation increases linearly with N _{CH 2}; the variation of log₁₀ K _D ^o is discussed by decomposing the distribution constant into the Born-type electrostatic contribution and the non-Born one, and attributed to the latter that is governed by the differences in the molar volumes of the cations. The cation dependencies of the ion-pair extractability and ion pairing in water are also discussed. An erratum to this article can be found at     

Transition metal complexes bearing 2,6-bis(imino)pyridyl: Synthesis,structure, ethylene polymerization/ oligomerization studies

A series of new complexes {2,6-bis[1-((2-methyl-4-methoxyphenyl)imino)ethyl]pyridine}Cl₂ [M=Fe(II) (2), Co(II) (3), Ni(II) (4), Cu(II) (5), Zn(II) (6)] have been synthesized. At 25°C, using 500 equiv of methylaluminoxane (MAO), the activities of Fe(II), Co(II) catalysts can reach 4.02 ×10⁶ g/mol-Fehatm for ethylene polymerization and 3.98×10⁵ g/mol-Cohatm for ethylene oligomerization. The effects of polymerization conditions such as reaction temperature, Al/M molar ratio and time on the activity of catalyst have been explored.     

Dissociative recombination cross section and branching ratios of protonated dimethyl disulfide and N-methylacetamide

Dimethyl disulfide (DMDS) and N-methylacetamide are two first choice model systems that represent the disulfide bridge bonding and the peptide bonding in proteins. These molecules are therefore suitable for investigation of the mechanisms involved when proteins fragment under electron capture dissociation (ECD). The dissociative recombination cross sections for both protonated DMDS and protonated N-methylacetamide were determined at electron energies ranging from 0.001 to 0.3 eV. Also, the branching ratios at 0 eV center-of-mass collision energy were determined. The present results give support for the indirect mechanism of ECD, where free hydrogen atoms produced in the initial fragmentation step induce further decomposition. We suggest that both indirect and direct dissociations play a role in ECD.     

Solubility Behavior in Ternary Water-Salt Systems under Sub- and Supercritical Conditions

Summary.  Two main types of binary systems with distinctive solubility behavior under sub- and supercritical conditions were used to subdivide ternary water-salt systems into three classes. Characteristic features of solubility behavior and phase equilibria in ternary water-salt systems of each class at temperatures above 200°C are discussed on the basis of available experimental data and some conclusions obtained as a result of theoretical derivation of fluid and complete phase diagrams. Corresponding author. E-mail: Valyashko@IGIC.RAS.RU Received September 25, 2002; accepted (revised) November 28, 2002 Published online April 24, 2003 RID="a" ID="a" Dedicated to Prof. Dr. H. Gamsjaeger on the occasion of his 70^th birthday anniversary     

Thermal decompositions of zinc(II) benzenedicarboxylates

The thermal decompositions of zinc(II)benzenedicarboxylates were studied in air atmosphere at a heating-rate of 10 deg min^–1. Zinc phthalate and isophthalate were dehydrated in one step and next decomposed directly to ZnO. Zinc terephthalate was dehydrated in two steps and then decomposed directly to ZnO.

---

Zusammenfassung Bei einer Aufheizgeschwindigkeit von 10°-min^–1 wurde die thermische Zersetzung von Zink(II)benzoldikarboxylat in Luft untersucht. Zinkphtalat und -isophtalat wird zunächst in einem Schritt dehydratisiert und anschließend zu ZnO zersetzt. Zinkterephtalat wird vor der endgültigen Zersetzung zu ZnO in zwei Schritten dehydratisiert.

---

10 / . - . , .

     

The application of solid sorbents for the purification of aluminum contaminated chemicals used as modifiers in electrothermal atomic absorption spectrometry

Various microcolumns with solid sorbents (ion exchange resins, functionalised cellulose sorbents, chelating resins) have been tested with respect to their ability for the purification of aluminum contaminated chemicals used as modifiers in electrothermal atomic absorption spectrometry. The purification of NaNO(3), Mg(NO(3))(2), K(2)SO(4) and (NH(4))(2)HPO(4) has been the most effective with an almost 100% efficiency, when Spheron-Oxine was used as chelating resin. The sorption of aluminum from KOH solution has been found to be very high (around 90%) for all investigated sorbents. However, the best results have been obtained with anion-exchange resins. It has been difficult to purify concentrated mineral acids (HCl, H(2)SO(4)). A retention of aluminum above 80% has been achieved only when Cellex P, Chelex 100 or Amberlite XAD-2 have been used.     

Electric and sorption properties of controlled pore glasses

A series of controlled pore glasses (CPG) was made from the same raw glass by means of different chemical and thermal treatments. BET specific area, selectivity of cesium adsorption in relation to sodium, ionosorption capacity under dynamic conditions of these CPG were measured and potentiometric titrations carried out. ₀ vs. pH curves show i.e.p. and c.i.p. values similar to those for silica. KOH treatment leads to increase of BET specific surface but ionosorption capacity is decreased.