Glutamate receptor incorporated in a mixed hybrid bilayer lipid membrane array, as a sensing element of a biosensor working under flowing conditions

The realization of a reliable receptor biosensor requires stable, long-lasting, reconstituted biomembranes able to supply a suitable biomimetic environment where the receptor can properly work after incorporation. To this end, we developed a new method for preparing stable biological membranes that couple the biomimetic properties of BLMs (bilayer lipid membranes) with the high stability of HBMs (hybrid bilayer membranes); this gives rise to an innovative assembly, named MHBLM (mixed hybrid bilayer lipid membrane). The present work deals with the characterization of biosensors achieved by embedding an ionotropic glutamate receptor (GluR) on MHBLM. Thanks to signal (transmembrane current) amplification, which is typical of natural receptors, the biosensor here produced detects glutamate at a level of nmol L(-1). The transmembrane current changes linearly vs glutamate up to 100 nmol L(-1), while the limit of detection is 1 nmol L(-1). In addition, the biosensor response can be modulated both by receptor agonists (glycine) and antagonists (Mg(2+)) as well, and by exploiting the biosensor response, the distribution of different kinds of ionotropic GluR present in the purified sample, and embedded in MHBLM, was also evaluated. Finally, one of the most important aspects of this investigation is represented by the high stability of the biomimetic system, which allows the use of biosensor under flowing conditions, where the solutions flow on both biomembrane faces.     

Mechanistic studies on the asymmetric alkylation of amino ester enolates using a copper(II)salen catalyst

Hammett data indicate that the asymmetric alkylation of enolates catalysed by copper(II)salen complex 1, proceeds by an asynchronous S(N)2 reaction and that the role of the catalyst is to enhance the nucleophilicity of the enolate.     

Mechanism of formation of organic carbonates from aliphatic alcohols and carbon dioxide under mild conditions promoted by carbodiimides. DFT calculation and experimental study

Dicyclohexylcarbodiimide (CyN=C=NCy, DCC) promotes the facile formation of organic carbonates from aliphatic alcohols and carbon dioxide at temperatures as low as 310 K and moderate pressure of CO2 (from 0.1 MPa) with an acceptable rate. The conversion yield of DCC is quantitative, and the reaction has a very high selectivity toward carbonates at 330 K; increasing the temperature increases the conversion rate, but lowers the selectivity. A detailed study has allowed us to isolate or identify the intermediates formed in the reaction of an alcohol with DCC in the presence or absence of carbon dioxide. The first step is the addition of alcohol to the cumulene (a known reaction) with formation of an O-alkyl isourea [RHNC(OR')=NR] that may interact with a second alcohol molecule via H-bond (a reaction never described thus far). Such an adduct can be detected by NMR. In alcohol, in absence of CO2, it converts into a carbamate and a secondary amine, while in the presence of CO2, the dialkyl carbonate, (RO)2CO, is formed together with urea [CyHN-CO-NHCy]. The reaction has been tested with various aliphatic alcohols such as methanol, ethanol, and allyl alcohol. It results in being a convenient route to the synthesis of diallyl carbonate, in particular. O-Methyl-N,N'-dicyclohexyl isourea also reacts with phenol in the presence of CO2 to directly afford for the very first time a mixed aliphatic-aromatic carbonate, (MeO)(PhO)CO. A DFT study has allowed us to estimate the energy of each intermediate and the relevant kinetic barriers in the described reactions, providing reasonable mechanistic details. Calculated data match very well the experimental results. The driving force of the reaction is the conversion of carbodiimide into the relevant urea, which is some 35 kcal/mol downhill with respect to the parent compound. The best operative conditions have been defined for achieving a quantitative yield of carbonate from carbodiimide. The role of temperature, pressure, and catalysts (Lewis acids and bases) has been established. As the urea can be reconverted into DCC, the reaction described in this article may further be developed for application to the synthesis of organic carbonates under selective and mild conditions.     

Identification and mass spectrometric characterization of glycosylated flavonoids in Triticum durum plants by high-performance liquid chromatography with tandem mass spectrometry

A mass spectrometric method for extensive detection and semi-quantitative determination of flavonoid glycosides in stem and leaves of young Triticum durum plants is presented. About 100 g of sample were lyophilized and ground, and the compounds of interest were then extracted, cleaned-up, and fractionated using high-performance liquid chromatography (HPLC). Tandem mass spectrometry analyses were performed using a quadrupole-linear ion trap instrument with an information-dependent data acquisition (IDA) protocol that looped two experiments, enhanced MS scan and enhanced product ion scan. Various glycoconjugates, which are all derivatives of only four flavones, apigenin, luteolin, chrysoeriol and tricin, were identified and belong to the following categories: 7 monoglycosides, 31 diglycosides, 15 triglycosides and 1 tetraglycoside. Among these some acylated glycosides were found. Tricin derivatives are present exclusively as O-glycosides, while apigenin and luteolin are present always as C-glycosides. Semi-quantitative estimation was performed by using the monoglycoside and diglycoside of quercetin as internal standards.     

TiCl4-promoted addition of nucleophiles to open chain α-amidoalkylphenyl sulfones

Linear α-amidoalkylphenyl sulfones are converted into the corresponding N-acyliminium ions by treatment with TiCl₄ at low temperature and then made to react with different nucleophiles such as allyltrimethylsilane, silyl ketene acetal, anisole and thiophene.     

Oxalate films and red stains on Carrara marble

The analytical studies carried out during two different diagnostic surveys, respectively in 1983 and 2003, offered the opportunity to control decay phenomena development on stones facing Certosa of Pavia (Italy). Calcium oxalate films and red stains, present on Carrara marble surface, have been particularly focused; these are the only decay phenomena which apparently have remained unchanged during a period of twenty years. More sensitive and in-depth analytical studies (FTIR equipped with diamond cell, GC-MS, SEM-EDS and optical microscopy) achieved a better knowledge about their composition. Results allowed a critical evaluation of the role of oxalate films on the external marble surface and to suggest new hypotheses about the formation of red stains.     

Evolution of the Pt layer deposited on MgO(001) by pulsed laser deposition as a function of the deposition parameters: a scanning tunneling microscopy and energy dispersive X-ray diffractometry/reflectometry study

A combined ultrahigh vacuum scanning tunneling microscopy (STM-UHV) and energy dispersive X-ray diffractometry/reflectometry (EDXD/EDXR) study of the evolution of face-centered cubic (fcc) Pt layer growth on MgO(100) by pulsed laser deposition as a function of the process parameters such as deposition temperature and deposition duration has been carried out. The aim of this study is to define the best experimental conditions to obtain a controlled film deposition selective on the Pt growth direction (either [111] or [002]). The evolution of the Pt surface morphology as a function of the deposition temperature (T(dep)) from 300 to 700 degrees C has been studied with STM and ED techniques. Results show that the Pt surface, characterized at T(dep) = 300 degrees C by a 3D island morphology, evolves at higher temperatures to a morphology in which the original islands coexist with a distribution of orthogonal 2D stripes. The two features can be associated with the [111] and [002] Pt growth directions of the fcc phase, respectively. For T(dep) = 700 degrees C, the island morphology of the (111) face completely disappears, while the merging process of the (002) stripes reaches completion. The evolution of the morphology at T(dep) = 600 degrees C as a function of the deposition time and thickness has then been studied with STM-UHV, revealing an initial growth of mosaic-like 3D islands. These independent islands, already interconnected, expand along two orthogonal directions and, for longer deposition times, lead to the texture of orthogonal stripes. The EDXR characterization providing the morphological parameters of the films, i.e., thickness and roughness, confirms the above observation and quantifies the effect of such morphological changes on the surface roughness of the Pt film, an important parameter for applications of Pt films as underlayer in magnetic recording media.     

Enhancement of two-photon absorption cross-section and singlet-oxygen generation in porphyrins upon beta-functionalization with donor-acceptor substituents

The microwave-enhanced synthesis, comparative singlet oxygen sensitization efficiency, and nonlinear optical characterization of a new beta-functionalized porphyrin and its copper complex are described. We show that the introduction of a donor-acceptor push-pull conjugated fragment in the beta position strongly perturbs the porphyrin electronic structure leading to a remarkable one- and two-photon NIR absorption enhancement.     

Structure-activity-based design of a synthetic malaria peptide eliciting sporozoite inhibitory antibodies in a virosomal formulation

The circumsporozoite protein (CSP) of Plasmodium falciparum is a leading candidate antigen for inclusion in a malaria subunit vaccine. We describe here the design of a conformationally constrained synthetic peptide, designated UK-39, which has structural and antigenic similarity to the NPNA-repeat region of native CSP. NMR studies on the antigen support the presence of helical turn-like structures within consecutive NPNA motifs in aqueous solution. Intramuscular delivery of UK-39 to mice and rabbits on the surface of reconstituted influenza virosomes elicited high titers of sporozoite crossreactive antibodies. Influenza virus proteins were crucially important for the immunostimulatory activity of the virosome-based antigen delivery system, as a liposomal formulation of UK-39 was not immunogenic. IgG antibodies elicited by UK-39 inhibited invasion of hepatocytes by P. falciparum sporozoites, but not by antigenically distinct P. yoelii sporozoites. Our approach to optimized virosome-formulated synthetic peptide vaccines should be generally applicable for other infectious and noninfectious diseases.     

A novel LIF-CE method for the separation of hyaluronan- and chondroitin sulfate-derived disaccharides: Application to structural and quantitative analyses of human plasma low- and high-charged chondroitin sulfate isomers

The report describes a rapid and simple CE method using LIF detection for the analysis of unsaturated disaccharides obtained from enzymatic depolymerization of plasma chondroitin sulfate (CS) isomers. The disaccharide reducing groups were labeled with 2-aminoacridone (AMAC). The fluorotagged products can be separated by reversed-polarity CE using a sodium acetate buffer, pH 3.8, in the presence of 0.05% methylcellulose. The choice of the appropriate electrophoretic conditions was performed after a deep analysis of the most important parameters affecting analyte separation. In particular, the effect of both run buffer concentration and pH on resolution, efficiency, migration times, and peak area was evaluated. The selected electrophoretic conditions allowed us to separate the CS isomers-derived Delta-disaccharides in less than 12 min, also resolving the nonsulfated disaccharides released from CS isomers from those released from hyaluronan (HA). Moreover, these conditions gave a good reproducibility of both the migration times (CV%, 0.25) and the peak areas (CV%, 1.4). Intra- and interassay CV were 5.37 and 7.23%, respectively, and analytical recovery was about 86%. The applicability of the above method to the quantitative and structural disaccharide analyses of plasma CS isomers was investigated. Data obtained from 44 healthy human subjects were compared with those obtained by a fluorophore-assisted carbohydrate electrophoresis (FACE) reference assay, by using the Passing and Bablok regression and Bland-Altman tests. The developed method could represent a good tool for an ultrasensitive analysis of CS isomers in biological samples from different sources, particularly when samples are available in very low amounts.