Hybrid organo-inorganic clay with nonionic interlayers. mid- and near-IR spectroscopic studies

The intercalation of organic polymers molecules (i.e., PEGs and BRIJ) into a standard Ca-montmorillonite has been studied by XRD, TG, and IR spectroscopy. The polymer intercalation is confirmed by the increasing of the d(001) in XRD spectra as well as by the complex multisteps thermal decomposition behavior of the organo-clay materials. Mid-IR and diffuse reflectance near-IR spectra of the intercalated materials show the polymer diagnostic bands (CH stretching and deformation mode), shifted or changed in shape by the interaction with the clay matrix. Both PEG 1500 and PEG 4000 based materials are likely intercalated in an extended configuration, similar to the amorphous polymer form. BRIJ intercalated polymer spectra suggest the disordered conformation of the alkilic chain in a prevailing "gauche", poorly packed, conformation. Host montmorillonite IR bands, mainly OH and water stretching and deformation fundamentals, combination, and overtone bands, are reduced in intensity by polymer intercalation, pointing out an interaction, likely through H-bonding and/or a possible substitution of cations hydration water molecules.     

Unravelling the reaction path of rhodium-MonoPhos-catalysed olefin hydrogenation

The mechanism of the asymmetric hydrogenation of methyl (Z)-2-acetamidocinnamate (mac) catalysed by [Rh(MonoPhos)(2)(nbd)]SbF(6) (MonoPhos: 3,5-dioxa-4-phosphacyclohepta[2,1-a:3,4-a']dinaphthalen-4-yl)dimethylamine) was elucidated by using (1)H, (31)P and (103)Rh NMR spectroscopy and ESI-MS. The use of nbd allows one to obtain in pure form the rhodium complex that contains two units of the ligand. In contrast to the analogous complexes that contain cis,cis-1,5-cyclooctadiene (cod), this complex shows well-resolved NMR spectroscopic signals. Hydrogenation of these catalyst precursors at 1 bar total pressure gave rise to the formation of a bimetallic complex of general formula [Rh(MonoPhos)(2)](2)(SbF(6))(2); no solvate complexes were detected. In the dimeric complex both rhodium atoms are ligated to two MonoPhos ligands but, in addition, each rhodium atom also binds to one of the binaphthyl rings of a ligand that is bound to the other rhodium metal. Upon addition of mac, a mixture of diastereomeric complexes [Rh(MonoPhos)(2)(mac)]SbF(6) is formed in which the substrate is bound in a chelate fashion to the metal. Upon hydrogenation, these adducts are converted into a new complex [Rh(MonoPhos)(2){mac(H)(2)}]SbF(6) in which the methyl phenylalaninate mac(H)(2) is bound through its aromatic ring to rhodium. Addition of mac to this complex leads to displacement of the product by the substrate. No hydride intermediates could be detected and no evidence was found for the involvement at any stage of the process of complexes with only one coordinated MonoPhos. The collected data suggest that the asymmetric hydrogenation follows a Halpern-like mechanism in which the less abundant substrate-catalyst adduct is preferentially hydrogenated to phenylalanine methyl ester.     

Reversible Mechanical Switching of Magnetic Interactions in a Molecular Shuttle

An acid–base switchable molecular shuttle based on a [2]rotaxane, incorporating stable radical units in both the ring and dumbbell components, is reported. The [2]rotaxane comprises a dibenzo[24]crown-8 ring (DB24C8) interlocked with a dumbbell component that possesses a dialkylammonium (NH₂⁺) and a 4,4′-bipyridinium (BPY²⁺) recognition site. Deprotonation of the rotaxane NH₂⁺ centers effects a quantitative displacement of the DB24C8 macroring to the BPY²⁺ recognition site, a process that can be reversed by acid treatment. Interaction between stable 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) radicals connected to the ring and dumbbell components could be switched between noncoupled (three-line electron paramagnetic resonance (EPR) spectrum) and coupled (five-line EPR spectrum) upon displacement of the spin-labelled DB24C8 macroring. The complete base- and acid-induced switching cycle of the EPR pattern was repeated six times without an appreciable loss of signal, highlighting the reversibility of the process. Hence, this molecular machine is capable of switching on/off magnetic interactions by chemically driven reversible mechanical effects. A system of this kind represents an initial step towards a new generation of nanoscale magnetic switches that may be of interest for a variety of applications.     

Synthesis of highly decorated chiral 2-nitro-cyclohexane carboxylic esters through microwave-assisted organocatalyzed cascade reactions

Starting from (E)-β-substituted-β-nitroacrylates and α,β-unsaturated ketones, a stereoselective organocatalyzed one-pot methodology allowed to synthesize highly decorated chiral 2-nitro-cyclohexane carboxylic esters. The reaction is promoted by Cinchona alkaloid-derived primary amines in the presence of an acidic co-catalyst and affords two diastereoisomers, in good yields and high enantiomeric excess (often higher than 90% ee). By replacing conventional heating with microwave irradiation, cleaner reactions in shortened times (from 48 h to 30 min) were obtained, with improved dr (80:20) and high ee (up to 94%). The application of microwave technology to this organocatalytic methodology allowed also employing C1 substituted enones, leading to cyclohexanones with four contiguous stereocenters in two isomers only, and up to 99% enantioselectivity.     

Determination and characterization of phytochelatins by liquid chromatography coupled with on line chemical vapour generation and atomic fluorescence spectrometric detection

Liquid chromatography (LC) coupled on line with UV/visible diode array detector (DAD) and cold vapour generation atomic fluorescence spectrometry (CVGAFS) has been developed for the speciation, determination and characterization of phytochelatins (PCs). The method is based on a bidimensional approach, e.g. on the analysis of synthetic PC solutions (apo-PCs and Cd(2+)-complexed PCs) (i) by size exclusion chromatography coupled to UV diode array detector (SEC-DAD); (ii) by the derivatization of PC -SH groups in SEC fractions by p-hydroxymercurybenzoate (PHMB) and the indirect detection of PC-PHMB complexes by reversed phase liquid chromatography coupled to atomic fluorescence detector (RPLC-CVGAFS). MALDI-TOF/MS (matrix assisted laser desorption ionization time of flight mass spectrometry) analysis of underivatized synthetic PC samples was performed in order have a qualitative information of their composition. Quantitative analysis of synthetic PC solutions has been performed on the basis of peak area of PC-PHMB complexes of the mercury specific chromatogram and calibration curve of standard solution of glutathione (GSH) complexed to PHMB (GS-PHMB). The limit of quantitation (LOQ) in terms of GS-PHMB complex was 90 nM (CV 5%) with an injection volume of 35 microL, corresponding to 3.2 pmol (0.97 ng) of GSH. The method has been applied to analysis of extracts of cell cultures from Phaeodactylum tricornutum grown in Cd-containing nutrient solutions, analysed by SEC-DAD-CVGAFS and RPLC-DAD-CVGAFS.     

Surface-activated chemical ionization and high-flow gradient chromatography to reduce matrix effect

The new atmospheric pressure chemical ionization source, named surface-activated chemical ionization (SACI), has been used in conjunction with high-flow gradient chromatography to reduce the matrix effect. This high-flow gradient chromatography approach avoids the co-elution of analyte and biological matrix compounds that leads to a reduction in quantitation errors due to matrix effect. However, this approach cannot be employed with the classical electrospray ionization (ESI) source that usually works at low eluent flow (< 300 microL/min). SACI can work at high eluent flow (100-2000 microL/min) and can be employed in conjunction with high-flow gradient chromatography. The reduction in matrix effect in tacrolimus analysis in protein-precipitated blood samples, an important immunosuppressive agent for renal transplantation, is presented and discussed.     

Fatty acids by high-performance liquid chromatography and evaporative light-scattering detector

A high-performance liquid chromatographic (HPLC) separation method with an evaporative light-scattering detector (ELSD) has been developed for the separation and quantitative analysis of fatty acid methyl esters (FAME) in three different oils. Reverse-phased C18 HPLC separation of 13 FAME is achieved using a methanol/water eluent mixture. The retention times (RT) reflect the elution behavior of these compounds on C18 reversed-phase HPLC. The proposed method is tested on: soybean oil (Glycine max L.) as reference sample, rice bran oil (Oryza sativa L.), pumpkin seed oil (Cucurbita pepo L.) and algal oil (Arthrospira platensis Nordst.).     

Exploring Weak Ligand–Protein Interactions by Long‐Lived NMR States: Improved Contrast in Fragment‐Based Drug Screening

Ligands that have an affinity for protein targets can be screened very effectively by exploiting favorable properties of long‐lived states (LLS) in NMR spectroscopy. In this work, we describe the use of LLS for competitive binding experiments to measure accurate dissociation constants of fragments that bind weakly to the ATP binding site of the N‐terminal ATPase domain of heat shock protein 90 (Hsp90), a therapeutic target for cancer treatment. The LLS approach allows one to characterize ligands with an exceptionally wide range of affinities, since it can be used for ligand concentrations [L] that are several orders of magnitude smaller than the dissociation constants K_D. This property makes the LLS method particularly attractive for the initial steps of fragment‐based drug screening, where small molecular fragments that bind weakly to a target protein must be identified, which is a difficult task for many other biophysical methods.     

Improved rapid assay of plasma uric acid by short-end injection capillary zone electrophoresis

A rapid and simple short-end injection capillary zone electrophoresis method was developed for the quantification of plasma uric acid. The separation was performed in an uncoated fused-silica capillary (50 μm ID, 60 cm total length, 10.2 cm effective length) by using as a background electrolyte a 75 mmol/L glycylglycine solution titrated with NaOH 5 mol/L to pH 9.0, a voltage of 28 kV, a cartridge temperature of 15 °C, and direct UV detection at 292 nm. Under optimized conditions, uric acid was determinate in little more than 1 min (1.076 minutes). In order to verify the accuracy of the analysis, urate levels were measured in 543 apparently healthy volunteers by the new assay and our previous method, and the obtained data were compared by Passing–Bablock regression, Bland–Altman test, and a new regression-based approach, which showed a good agreement between two methods.