Electrodynamic investigations of conduction processes in humid microcrystalline cellulose tablets

The conduction mechanism in microcrystalline cellulose (MCC) tablets at varying relative humidity (RH) has been investigated by using the techniques of low frequency dielectric spectroscopy and transient current analysis at room temperature. The dependence on RH on the measured conductivity and charge carrier density indicates that a high-power-law-exponent percolation process of cations being conducted on water molecules occupying available 6-OH units on the cellulose chains is the dominating dc conduction mechanism at RH below 3 wt % of moisture content. The experimentally observed decrease in charge carrier mobility with increasing moisture content shows that protons and H3O+ ions that are being blocked at empty 6-OH sites also contribute to the charge transport process in cellulose at low moisture contents.     

Microwave-enhanced carbonylative generation of indanones and 3-acylaminoindanones

The development of microwave-accelerated protocols for palladium(0)-catalyzed carbonylative cyclization of unsaturated aryl bromides and chlorides is described. By employing o-bromostyryl derivatives lacking substituents on the vinylic bond, molybdenum hexacarbonyl-mediated in situ carbonylation delivered a set of indan-1-one products in high yield after only 20 min of heating. Without the addition of the tri-tert-butylphosphine releasing Fu-salt ((t-Bu)(3)PHBF(4)), only incomplete conversions of sluggish o-styryl bromides and chlorides were realized. Internal and chemoselective palladium(0)-catalyzed Heck arylations of enamides afforded suitable starting materials for subsequent rapid ring-closing reactions. Microwave-heated intramolecular in situ carbonylation of these electron-rich and sterically congested olefins conveniently afforded eight functionalized 3-acylaminoindanone derivatives in a novel synthetic process. Attempted carbonylative annulation of electron-poor o-bromocinnamic acid derivatives furnished only the corresponding lactones via a competing hydroxycarbonylation-Michael addition reaction sequence.     

Synthesis of models of metabolites: Oxidation of variously substituted chromenes including acronycine,by a porphyrin catalytic system

The influence of chemical neighbouring on oxidation of substituted 2,2‐dimethylchromenes derivatives 5‐8 by a biomimetic catalytic system was first studied. It was then applied to acronycine an anti‐cancer drug in order to obtain in one single step oxidized products resulting from the reactivity of the 1,2‐double bond in the pyranic D‐ring. These 2,2‐dimethylchromenes constitute the structural moiety responsible for the activity of acronycine. This oxidation showed the sensitivity of the ethylenic bond, leading to the formation of the corresponding epoxides, diols and/or ketoalcohol. In the case of 5‐dimethylamino‐2,2‐dimethylchromene 8 , the double bond was not sensitive to oxidation, but the N‐methyl groups reacted to lead to the formamide derivative 16 and an imino‐alcohol 17 . This methodology applied to acronycine molecule 1 , allowed to obtain in one step, two oxidized compounds, a trans‐diol 3 and a ketoalcohol 4 under preparative conditions.     

Complexation of Al(III) by 8-Hydroxyquinoline and Drastic Fluorescence Enhancement in Reverse Micelles

Complexation of Al^IIIby 8-hydroxyquinoline and fluorescence behavior of the quinolinate(s) were studied in reverse micellar systems at low water content, and compared to aqueous media. Two surfactants were used: one was cationic (CTAC: cetyltrimethylammonium chloride) and the other was anionic (AOT: sodium bis(2-ethylhexyl)sulfosuccinate). The results obtained in the CTAC/dichloromethane system (W= [H₂O]/[surfactant] = 0.9) showed that complexation occurred very likely in the oil phase and no micellar effect was observed. On the contrary, in the presence of AOT, specific micellar effects were observed due to the presence of the anionic polar heads: stabilization of the positively charged 1:1 and 1:2 chelates, at the expense of the neutral water-insoluble 1:3 chelate which is formed in aqueous solutions under similar conditions;drastic fluorescence enhancement factorsof 120 and 100 in AOT/heptane (W= 1.5) and AOT/dichloromethane (W= 1.6), respectively. Such factors have never been reported so far in either hydroorganic or direct micellar systems. In return, the length of time for the production of the complex(es) is increased because of the microheterogeneity of the medium and the small sizes of the water pools.     

A novel technique to specifically analyze the secretome of cells and tissues

The secretome of cells and tissues may reflect a broad variety of pathological conditions and thus represents a rich source of biomarkers. The identity of secreted proteins, usually isolated from cell supernatants or body fluids, is hardly accessible by direct proteome analysis, because these proteins are often masked by high amounts of proteins actually not secreted by the investigated cells. Here, we present a novel method for the specific detection of proteins secreted by human tissue specimen as well as cultured cells and chose liver as a model. The method is based on the metabolic labelling of proteins synthesized during a limited incubation period. Then, the cell supernatant is filtered, precipitated, and subjected to two-dimensional gel electrophoresis. Whereas fluorography detected a large number of proteins derived from residual plasma and dead cells, the autoradiographs selectively displayed genuinely secreted proteins. We demonstrate the feasibility of this approach by means of the secretomes of the hepatocellular carcinoma-derived cell line HepG2 and human liver slices. The selective identification of cell- and tissue-specific protein secretion profiles may help to identify novel sets of biomarkers for wide clinical applications.     

Layer by layer buildup of polysaccharide films: physical chemistry and cellular adhesion aspects

The formation ofpolysaccharide films based on the alternate deposition of chitosan (CHI) and hyaluronan (HA) was investigated by several techniques. The multilayer buildup takes place in two stages: during the first stage, the surface is covered by isolated islets that grow and coalesce as the construction goes on. After several deposition steps, a continuous film is formed and the second stage of the buildup process takes place. The whole process is characterized by an exponential increase of the mass and thickness of the film with the number of deposition steps. This exponential growth mechanism is related to the ability of the polycation to diffuse "in" and "out" of the whole film at each deposition step. Using confocal laser microscopy and fluorescently labeled CHI, we show that such a diffusion behavior, already observed with poly(L-lysine) as a polycation, is also found with CHI, a polycation presenting a large persistence length. We also analyze the effect of the molecular weight (MW) of the diffusing polyelectrolyte (CHI) on the buildup process and observe a faster growth for low MW chitosan. The influence of the salt concentration during buildup is also investigated. Whereas the CHI/HA films grow rapidly at high salt concentration (0.15 M NaCl) with the formation of a uniform film after only a few deposition steps, it is very difficult to build the film at 10(-4) M NaCl. In this latter case, the deposited mass increases linearly with the number of deposition steps and the first deposition stage, where the surface is covered by islets, lasts at least up to 50 bilayer deposition steps. However, even at these low salt concentrations and in the islet configuration, CHI chains seem to diffuse in and out of the CHI/HA complexes. The linear mass increase of the film with the number of deposition steps despite the CHI diffusion is explained by a partial redissolution of the CHI/HA complexes forming the film during different steps of the buildup process. Finally, the uniform films built at high salt concentrations were also found to be chondrocyte resistant and, more interestingly, bacterial resistant. Therefore, the (CHI/HA) films may be used as an antimicrobial coating.     

Miniaturization of separation techniques using planar chip technology

Miniaturization of separation columns implies equally reduced vol- umes of injectors, detectors, and the connecting channels. Planar chip technology provides a powerful means for the fabrication of micron-sized structures such as channels. This is demonstrated by two examples. An optical absorbance detector chip exhibits the expected behavior of a 1 mm optical path length cell despite its volume of 1 nL. A capillary electrophoresis device allows integrated injections of 100 pL samples, efficiencies of 70,000 to 160,000 theoretical plates in 10 to 20 seconds, and external laser-induced fluorescence detection at any capillary length of choice between 5 and 50 mm.     

Cyclotetrasilazane als precursor für cyclotrisilazane und bis(cyclodisilazan-1-yl)silane

Di-lithiated octamethylcyclotetrasilazane (OMCTS, 1) reacts with halosilanes in different ways. Ring contraction with formation of the isomeric cyclodisilazanes 2, 3 occurs in the reaction with chloro- and fluorotrimethylsilanes. Substitution (6) and ring contraction with formation of the isomeric six-membered ring 7 occurs with chlorodimethylsilane. 2, 3, 6 and 7 are excellent precursors of silyl-bridged, SiH-functional, four-membered ring systems (4, 5, 9–11). The mechanism of the isomerization reactions are discussed.     

Enhanced selectivity in Novozym 435 catalyzed kinetic resolution of secondary alcohols and butanoates caused by the (R)-alcohols

In esterifications of secondary alcohols catalyzed by immobilized lipase B from Candida antarctica (Novozym 435) the E-values decreased during the reaction. Hydrolysis of the corresponding butanoates showed the opposite effect. When an enantiopure (R)-alcohol, related but different, was added to the transesterification reaction, the E-value was significantly enhanced.     

Ethylenic compounds reactivity: bromination—XLI: Relative reactivities of R1CMeCH2 and R1CHCMe2 series as a criterion for distinguishing between bridged and acyclic transition states. Degree of symmetry of the bromonium ion-like transition state

Reactivities of homogeneous series of ethylenic compounds R¹CHCH₂1, trans R¹CHCHMe 2, R¹MeCCH₂3 and R¹CHCMe₂4 have been measured in methanol at 25°C (R¹ Me, Et, n-Pr, -CH₂C₆H₅-CH₂OCOCH₃, -CH₂Cl). The criterion developed to decide between a bridged and a carbonium ion-like transition state is based on an internal comparison of the series and avoids resorting to external structural scales. Even in the case of alkenes 3 and 4 which are very dissymmetric with respect to polarity, the sensitivity to polar effects remains constant and the transition state behaves like a symmetric entity; only a slight secondary effect, attributed to hyperconjugation, is detectable.