New Insights into the Reactivity of Cisplatin with Free and Restrained Nucleophiles: Microsolvation Effects and Base Selectivity in Cisplatin–DNA Interactions

The reactivity of cisplatin towards different nucleophiles has been studied by using density functional theory (DFT). Water was considered first to analyze the factors that govern the transformation of cisplatin into more electrophilic aquated species by using an activation‐strain model. It was found that the selectivity and reactivity of cisplatin is a delicate trade‐off between strain and interaction energies and that the second chloride is a worse leaving group than the first. When similar studies were carried out with imidazole, guanine (G), and adenine (A), it was found that in general the second nucleophilic substitution reactions have lower activation barriers than the first ones. Finally, simulations of the structural restrictions imposed by the DNA scaffold in intra‐ and interstrand processes showed that the geometries of the reaction products are nonoptimal with respect to the unrestrained A and G nucleophiles, although the energetic cost is not considerable under physiological conditions, which thus permits nucleophilic substitution reactions that lead to highly distorted DNA.     

Bromo­di­methyl(N‐methyl­pyrrolidin‐2‐one‐O)­tin(IV)‐di‐μ‐bromo‐bromo­di­methyl­tin(IV)

The preparation and X‐ray analysis of the title compound, [Sn₂Br₄(CH₃)₄(C₅H₉NO)], are described. The compound contains two Sn atoms in the asymmetric unit, that complexed by N‐methyl­pyrrolidin‐2‐one being hexacoordinated (a), the other exhibiting pentacoordination (b). The most important features are three different Sn—Br bond lengths at both Sn atoms with the following values: (a) 2.5060 (9), 2.7152 (10) and 3.7118 (10) Å; (b) 2.5084 (10), 2.5279 (9) and 3.5841 (10) Å.     

Effect of temperature on the chromatographic retention of ionizable compounds. III. Modeling retention of pharmaceuticals as a function of eluent pH and column temperature in RPLC

We propose a general simple equation for accurately predicting the retention factors of ionizable compounds upon simultaneous changes in mobile phase pH and column temperature at a given hydroorganic solvent composition. Only four independent experiments provide the input data: retention factors measured in two pH buffered mobile phases at extreme acidic and basic pH values (e. g., at least +/- 2 pH units far from the analyte pK(a)) and at two column temperatures. The equations, derived from the basic thermodynamics of the acid-base equilibria, additionally require the knowledge of the solute pK(a )and enthalpies of acid-base dissociation of both the solute and the buffer components in the hydroorganic solvent mixture. The performance of the predictive model is corroborated with the comparison between theoretical and experimental retention factors of several weak acids and bases of important pharmacological activity, in mobile phases containing different buffer solutions prepared in 25% w/w ACN in water and at several temperatures.     

An investigation of the accelerated thermal degradation of different epoxy resin composites using X-ray microcomputed tomography and optical coherence tomography

Epoxy resin composites reinforced with hollow glass microspheres, microlight microspheres, 3D parabeam glass, and E-Glass individually were subjected to accelerated thermal degradation conditions. X-ray microcomputed tomography (XμCT) was used to evaluate density changes, reinforcement filler damage, homogeneity, cracks and microcracks in the bulk of the different epoxy resin composites. XμCT 3D images, 2D reconstructed images and voids calculations revealed microspheres damage, filler distributions and showed cracks in all composites with different shapes and volume in response to the thermal degradation conditions. In addition, expansion of air bubbles/voids was observed and recorded in the microsphere and microlight epoxy composite samples. In a complementary way, optical coherence tomography (OCT) was used as a novel optical characterisation technique to study structural changes of the surface and near-surface regions of the composites, uncovering signs of surface shrinkage caused by the thermal treatment. Thus, combining XμCT and OCT proved useful in examining epoxy resin composites' structure, filler-resin interface and surface characteristics.     

Carpet Beater Molecules: Synthesis and Characterization of Functional Hexa-peri-benzocoronene–Alkyne Coupling Products

Within the scope of this paper, nine π-expanded mono-substituted 5,8,11,14,17-pentakis-(tert-butyl)-hexa-peri-hexabenzocoronenes (HBC) are introduced. 2-Iodo-5,8,11,14,17-pentakis-(tert-butyl)-hexa-peri-hexabenzocoronene served as precursor and was reacted with ethynyltrimethylsilane in a Sonogashira coupling reaction. The acetylene unit is used as a linker and can undergo another Sonogashira coupling reaction combining different phenyl coupling partners with the HBC core. The electron-withdrawing groups such as nitrile, pyridine and carbonyl species (aldehyde, methylester, carboxylic acid) as well as the three quinoxaline based species (diphenylquinoxaline, dibenzo[a,c]phenazine, phenanthro[4’,5’-a,b,c]phenazine) serve as substitution moieties. Their influence on the optoelectronic properties were investigated by UV/Vis absorption spectroscopy demonstrating a maximum redshift of 7 nm compared to starting compound 2-Iodo-5,8,11,14,17-pentakis-(tert-butyl) HBC. As for the phenanthro[4’,5’-a,b,c]phenazine substituted HBC a dramatic decrease in the intensity of the absorption of the UV/Vis spectrum was observed. The fluorescence spectroscopy pointed out that the dibenzo[a,c]phenazine and phenanthro[4’,5’-a,b,c]phenazine substitution changed the spectra to one broad peak departing from the characteristic HBC-like emission pattern.     

Challenges and Opportunities of Implementing Data Fusion in Process Analytical Technology—A Review

The release of the FDA’s guidance on Process Analytical Technology has motivated and supported the pharmaceutical industry to deliver consistent quality medicine by acquiring a deeper understanding of the product performance and process interplay. The technical opportunities to reach this high-level control have considerably evolved since 2004 due to the development of advanced analytical sensors and chemometric tools. However, their transfer to the highly regulated pharmaceutical sector has been limited. To this respect, data fusion strategies have been extensively applied in different sectors, such as food or chemical, to provide a more robust performance of the analytical platforms. This survey evaluates the challenges and opportunities of implementing data fusion within the PAT concept by identifying transfer opportunities from other sectors. Special attention is given to the data types available from pharmaceutical manufacturing and their compatibility with data fusion strategies. Furthermore, the integration into Pharma 4.0 is discussed.     

VUV photon induced fluorescence study of SF5CF3

The interaction of SF(5)CF(3) with vacuum-UV radiation has been investigated by photon induced fluorescence spectroscopy. Total fluorescence yield and dispersed fluorescence spectra of SF(5)CF(3) were recorded in the 200-1000 nm fluorescence window. In all cases, the fluorescence spectra resemble those of CF(3)X (X = H, F, Cl, and Br) molecules. At photon energies below 20 eV, the emission is attributed to the excited CF(3) and CF(2) fragments. The threshold for the CF(3) emission is 10.2 +/- 0.2 eV, giving an upper limit estimate for the SF(5)-CF(3) bond dissociation energy of 3.9 +/- 0.3 eV. The excitation functions of the CF(3) and CF(2) emissions were measured in the photon energy range 13.6-27.0 eV. The resonant structures observed in SF(5)CF(3) are attributed to electronic transitions from valence to Rydberg orbitals, following similar assignments in CF(3)X molecules. The photoabsorption spectrum of SF(5)CF(3) shows features at the same energies, indicating a strong contribution from Rydberg excitations.     

Design of oxide nanoparticles by aqueous chemistry

The elaboration of nanoparticles designed for technological applications in various fields such as catalysis, optics, magnetism, electronics… needs the strict control of their characteristics, especially chemical composition, crystalline structure, size, and shape. These characteristics bring the physical properties (color, magnetism, band gap…) of the material, and also the surface to volume ratio of particles which is of high importance when they are used as a chemically active or reactive support, in catalysis for instance. The nanoparticles may have also to be surface functionalized by various species, and/or dispersed in aqueous or non aqueous media. We will show that the aqueous chemistry of metal cations is a very versatile and attractive way for the design of oxide nanomaterials, allowing the control of size, shape, and crystalline structure for polymorphic materials. Aqueous surface chemistry, including adsorption of various species, may be used to modify the morphology of nanoparticles. In some cases, redox processes can be involved to control the morphology of nanoparticles. Technologically important nanomaterials such as titania, alumina, and iron oxides are studied.     

A first-principles study of the electronic and structural properties of gamma-TaON

The geometric and electronic structure of the recently found new polymorph of tantalum oxynitride, gamma-TaON, and its structural stability were studied quantum-chemically at the density functional level. Results obtained by complementary quantum-chemical techniques with wavefunctions either expanded in atom-centered functions or in plane waves were compared, having employed pure density-functional functionals within the generalized gradient approximation as well as density-functional/Hartree-Fock hybrid methods. In particular, several plausible anion distributions were investigated and, in accordance with Pauling's second rule, it was found that the configuration in which nitrogen occupies crystallographic sites with highest coordination numbers is the most stable one. Theoretically generated local structural parameters were used to improve the accuracy of the experimentally derived information. The bonding situation in the most stable configuration was investigated by an analysis of the density of states.