Comparison of the acidity of residual silanol groups in several liquid chromatography columns

The silanol acidity of Waters Resolve C18, Waters Resolve silica, Waters Symmetry C18, Waters Symmetry silica, Waters XTerra MS C18 and underivatized XTerra columns has been measured from the retention of LiNO3 with a methanol/water (60:40) mobile phase buffered to different pH values. The Li+ cation is retained by cationic exchange with the background cation of the mobile phase (Na+) through the ionized silanols. The number of active silanols increases in the order: XTerra MS C18 < Symmetry C18 < underivatized XTerra < Resolve C18 < Resolve silica approximately equal to Symmetry silica. XTerra MS C18 does not present any residual silanol acidity up to s(s)pH 10.0 (pH in 60% methanol) as measured by LiNO3. The underivatized XTerra packing and Symmetry C18 present active silanols only at s(s)pH values higher than 7.0. For the other three columns, two different types of silanols with different acidity (s(s)pKa values about 3.5-4.6 and 6.2-6.8, respectively) have been observed. Symmetry C18 shows evidence of the presence of active basic sites that retain NO3- by anionic exchange.     

Synthesis of heteroaryl substituted α‐mercapto acids from thiomalic acid using hexafluoroacetone as protecting and activating reagent

The synthesis of heterocyclic α‐mercapto acids starting from (RS)‐thiomalic acid using hexafluoroacetone as protecting and activating agent is described. The new compounds are useful building blocks for peptide and depsipeptide modification as well as for drug design.     

Solid-State and solution studies of [Ln(n)(SiW11O39)] polyoxoanions: an example of building block condensation dependent on the nature of the rare earth

The reactivity of the [alpha-SiW(11)O(39)](8-) monovacant polyoxometalate with lanthanide has been investigated for four different trivalent rare-earth cations (Ln = Nd(III), Eu(III), Gd(III), Yb(III)). The crystal structures of KCs(4)[Yb(alpha-SiW(11)O(39))(H(2)O)(2)] x 24H(2)O (1), K(0.5)Nd(0.5)[Nd(2)(alpha-SiW(11)O(39))(H(2)O)(11)] x 17H(2)O (2a), and Na(0.5)Cs(4.5)[Eu(alpha-SiW(11)O(39))(H(2)O)(2)] x 23H(2)O (3a) are reported. The solid-state structure of compound 1 consists of linear wires built up of [alpha-SiW(11)O(39)](8-) anions connected by Yb(3+) cations, while the linkage of the building blocks by Eu(3+) centers in 3a leads to the formation of zigzag chains. In 2a, dimeric [Nd(2)(alpha-SiW(11)O(39))(2)(H(2)O)(8)](10-) entities are linked by four Nd(3+) cations. The resulting chains are connected by lanthanide ions, leading to a bidimensional arrangement. Thus, the dimensionality, the organization of the polyoxometalate building units, and the Ln/[alpha-SiW(11)O(39)](8-) ratio in the solid state can be tuned by choosing the appropriate lanthanide. The luminescent properties of compound 3a have been studied, showing that, in solution, the polymer decomposes to give the monomeric complex [Eu(alpha-SiW(11)O(39))(H(2)O)(4)](5-). The lability of the four exogenous ligands connected to the rare earth must allow the functionalization of this lanthanide polyanion.     

Structural-chemical disorder of manganese dioxides 1. Influence on surface properties at the solid-electrolyte interface

Relationships between lattice parameters of manganese dioxides and their surface properties at the solid-aqueous solution interface were investigated. The studied series ranged from ramsdellite to pyrolusite and encompassed disordered MD samples. The structural model used takes into account structural defects: Pr (rate of pyrolusite intergrowth) and Tw (rate of microtwinning). Water adsorption isotherms showed that the cross sectional area of water molecules adsorbed in the first monolayer is positively correlated to Pr. Titration of the surface charge of the MD series evidenced a positive linear relationship between the PZC and Pr (Pr=0, Tw=0, PZC=1 for ramsdellite; Pr=1, Tw=0, PZC=7.3 for pyrolusite; gamma-MD with intermediate values of Pr (0.2 to 0.45) have increasing PZC values). The rate of microtwinning appeared as a secondary factor for the increase of the PZC. The above correlations are explained by the chemical defects at the origin of the structural disorder, respectively Mn(3+)/Mn4+ substitution for Pr and Mn vacancies for Tw, which result in proton affinity and thus in increased PZC. The experimental results are compared with data collected in the literature for manganese dioxides as well as for dioxides of transition elements with tetragonal structure.     

Synthesis of intrinsically flame‐retardant copolyamides and their employment in PA6‐fibers

Flame‐retarded polyamide 6.6 (FR‐PA6.6) was prepared by the cocondensation of hexamethylene diammonium adipate (AH‐salt) with the corresponding salts of hexamethylene diamine and two different organophosphorus compounds, namely, 3‐hydroxyphenylphosphinylpropanoic acid (3‐HPP, 1) and 9,10‐dihydro‐10‐[2,3‐di (hydroxycarbonylpropyl]‐10‐phosphaphenanthrene‐10‐oxide (DDP, 2). The incorporation of the phosphorus comonomers and the thermal and physical properties of the resulting copolyamides have been studied. The phosphorus‐modified FR‐PA6.6 possesses high relative viscosities of 2.0 to 2.4, good thermal stability, and was used for the production of polyamide blends by merging FR‐PA6.6 with commercial PA6. This offered access to flame‐retarded PA6 multifilaments, which possess tensile strengths up to 0.7 GPa and elastic moduli up to 6.2 GPa. Knitted fabrics of FR‐PA6 exhibit high limiting oxygen index (LOI) values between 36 and 38 and executed burning tests demonstrate that the incorporation of phosphorus‐based comonomers improve flame retardancy significantly. The approach presented here offers a straightforward access to effective flame retardancy in nylon 6.     

Exploring the trifluoromenadione core as a template to design antimalarial redox-active agents interacting with glutathione reductase

Menadione is the 2-methyl-1,4-naphthoquinone core used to design potent antimalarial redox-cyclers to affect the redox equilibrium of Plasmodium-infected red blood cells. Exploring the reactivity of fluoromethyl-1,4-naphthoquinones, in particular trifluoromenadione, under quasi-physiological conditions in NADPH-dependent glutathione reductase reactions, is discussed in terms of chemical synthesis, electrochemistry, enzyme kinetics, and antimalarial activities. Multitarget-directed drug discovery is an emerging approach to the design of new antimalarial drugs. Combining in one single 1,4-naphthoquinone molecule, the trifluoromenadione core with the alkyl chain at C-3 of the known antimalarial drug atovaquone, revealed a mechanism for CF(3) as a leaving group. The resulting trifluoromethyl derivative 5 showed a potent antimalarial activity per se against malarial parasites in culture.     

Biotinylation: A nonradioactive method for the identification of cell surface antigens in immunoprecipitates

A nonradioactive method was employed to detect different cell membrane antigens on human polymorphonuclear granulocytes, monocytes and platelets. We compared the reactivity of one monoclonal antibody, N1III10, assumed to be FcγRII-specific by functional assays, with other well-characterized monoclonal antibodies and human sera. Intact cells were incubated with biotin N-hydroxysulfosuccinimide ester which preferentially reacts with lysine residues in polypeptides. Biotin-labeled cells were lysed and the antigen was isolated from the cell lysate by immunoprecipitation with the antibody bound to Protein A-Sepharose. The precipitates were separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, transferred onto nitrocellulose membrane, and visualized by a streptavidin-alkaline phosphatase system with a suitable substrate. Using this biotin-labeling system we could show that N1III10 detects a 40 kDa antigen on monocytes and platelets, comparable to that expected of FcγRII monoclonal antibodies.     

Derivatization Procedures for Reducing Oligosaccharides,Part 3: Preparation of Oligosaccharide Glycosylamines,and Their Conversion Into Glycosaccharide - Acrylamide Copolymers

Abstract

Reducing oligosaccharides were converted in good yields into the corresponding primary glycosylamines by treatment with aqueous ammonium bicarbonate. The glycosylamines were then acryloylated and the obtained oligosaccharide N-acryloyl glycosylamines were copolymerized with acrylamide. High molecular weight, linear copolymers were obtained, which were useful as antigens in immunoassays.     

Polygermoxanes suitable for biochemical purposes: II Linear trigermoxanes (high-viscosity oils)

Linear trigermoxanes, R¹ RGeOGe(R³)₂OGeRR¹, a new series of organogermanium compounds, were synthesized by reaction of a lithium organogermanolate with a suitable organogermanium dihalide. With alkyl or phenyl substituents, these trigermoxanes are structurally unstable viscous oils, due to redistribution reactions. When R³ substituents are bulky groups, such as mesityl, trigermoxanes are thermally and structurally stable oils; depending on the R¹ and R² substituents their viscosities lie in the range 240 to more than 1500 cPo (mPa s) at 20°C. When both terminal germanium atoms are substituted with two mesityl groups, trigermoxanes are stable glassy solids.