An electrochemical study into the interaction between complement-derived peptides and DOPC mono- and bilayers

Electrochemical methods employing the hanging mercury drop electrode were used to study the interaction between variants of the complement-derived antimicrobial peptide CNY21 (CNYITELRRQH ARASHLGLAR) and dioleoyl phosphatidylcholine (DOPC) monolayers. Capacitance potential and impedance measurements showed that the CNY21 analogues investigated interact with DOPC monolayers coating the mercury drop. Increasing the peptide hydrophobicity by substituting the two histidine residues with leucine resulted in a deeper peptide penetration into the hydrophobic region of the DOPC monolayer, indicated by an increase in the dielectric constant of the lipid monolayer (Deltaepsilon = 2.0 after 15 min interaction). Increasing the peptide net charge from +3 to +5 by replacing the histidines by lysines, on the other hand, arrests the peptide in the lipid head group region. Reduction of electroactive ions (Tl+, Pb2+, Cd2+, and Eu3+) at the monolayer-coated electrode was employed to further characterize the types of defects induced by the peptides. All peptides studied permeabilize the monolayer to Tl+ to an appreciable extent, but this effect is more pronounced for the more hydrophobic peptide (CNY21L), which also allows penetration of larger ions and ions of higher valency. The results for the various ions indicate that charge repulsion rather than ion size is the determining factor for cation penetration through peptide-induced defects in the DOPC monolayer. The effects obtained for monolayers were compared to results obtained with bilayers from liposome leakage and circular dichroism studies for unilamellar DOPC vesicles, and in situ ellipsometry for supported DOPC bilayers. Trends in peptide-induced liposome leakage were similar to peptide effects on electrochemical impedance and permeability of electroactive ions for the monolayer system, demonstrating that formation of transmembrane pores alone does not constitute the mechanism of action for the peptides investigated. Instead, our results point to the importance of local packing defects in the lipid membrane in close proximity to the adsorbed peptide molecules.     

Automated mass spectrometric analysis of urinary and plasma serotonin

Serotonin emerges as crucial neurotransmitter and hormone in a growing number of different physiologic processes. Besides extensive serotonin production previously noted in patients with metastatic carcinoid tumors, serotonin now is implicated in liver cell regeneration and bone formation. The aim was to develop a rapid, sensitive, and highly selective automated on-line solid-phase extraction method coupled to high-performance liquid chromatography–tandem mass spectrometry (XLC-MS/MS) to quantify low serotonin concentrations in matrices such as platelet-poor plasma and urine. Fifty microliters plasma or 2.5 μL urine equivalent were pre-purified by automated on-line solid-phase extraction, using weak cation exchange. Chromatography of serotonin and its deuterated internal standard was performed with hydrophilic interaction chromatography. Mass spectrometric detection was operated in multiple reaction monitoring mode using a quadrupole tandem mass spectrometer with positive electrospray ionization. Serotonin concentrations were determined in platelet-poor plasma of metastatic carcinoid patients (n = 23) and healthy controls (n = 22). Urinary reference intervals were set by analyzing 24-h urine collections of 120 healthy subjects. Total run-time was 6 min. Intra- and inter-assay analytical variation were <10%. Linearity in the 0–7300 μmol/L calibration range was excellent (R² > 0.99). Quantification limits were 30 and 0.9 nmol/L in urine and plasma, respectively. Platelet-poor serotonin concentrations in metastatic carcinoid patients were significantly higher than in controls. The urinary reference interval was 10–78 μmol/mol creatinine. Serotonin analysis with sensitive and specific XLC-MS/MS overcomes limitations of conventional HPLC. This enables accurate quantification of serotonin for both routine diagnostic procedures and research in serotonin-related disorders.     

Surface and bulk morphology of cold-crystallized poly(ethylene terephthalate)

The morphology/habit of crystals of cold-crystallized poly(ethylene terephthalate) (PET) has been evaluated using scanning and transmission electron microscopy and using atomic force microscopy. The combination of different preparation and analysis techniques allowed assessing the structure at the nanometer scale of films of PET at both the surface and the bulk. It is found that crystals formed on heating the amorphous glass to a temperature higher than the glass transition temperature are of lamellar shape in the bulk and almost isometric habit at the surface. This finding is explained by different rates of nucleation/crystallization in the bulk and at the surface, being supported by the observation of nanometer-scale surface heterogeneities after quenching PET to ambient temperature before crystallization was initiated by heating.     

Carbonylation of nitrobenzene in methanol with palladium bidentate phosphane complexes: an unexpectedly complex network of catalytic reactions, centred around a Pd-imido intermediate

The reactivity of palladium complexes of bidentate diaryl phosphane ligands (P₂) was studied in the reaction of nitrobenzene with CO in methanol. Careful analysis of the reaction mixtures revealed that, besides the frequently reported reduction products of nitrobenzene [methyl phenyl carbamate (MPC), N,N′‐diphenylurea (DPU), aniline, azobenzene (Azo) and azoxybenzene (Azoxy)], large quantities of oxidation products of methanol were co‐produced (dimethyl carbonate (DMC), dimethyl oxalate (DMO), methyl formate (MF), H₂O, and CO). From these observations, it is concluded that several catalytic processes operate simultaneously, and are coupled via common catalytic intermediates. Starting from a P₂Pd⁰ compound formed in situ, oxidation to a palladium imido compound P₂Pd^II?NPh, can be achieved by de‐oxygenation of nitrobenzene 1) with two molecules of CO, 2) with two molecules of CO and the acidic protons of two methanol molecules, or 3) with all four hydrogen atoms of one methanol molecule. Reduction of P₂Pd^II?NPh to P₂Pd⁰ makes the overall process catalytic, while at the same time forming Azo(xy), MPC, DPU and aniline. It is proposed that the Pd–imido species is the central key intermediate that can link together all reduction products of nitrobenzene and all oxidation products of methanol in one unified mechanistic scheme. The relative occurrence of the various catalytic processes is shown to be dependent on the characteristics of the catalysts, as imposed by the ligand structure.     

Nickel N‐heterocyclic carbene complexes in the vinyl polymerization of norbornene

Vinyl polymerized norbornene has some useful properties such as good mechanical strength, optical transparency and heat resistance. Several transition metal complexes have been described in the literature as active catalysts for the vinyl polymerization of norbornene. We now report the use of three types of nickel(II) complexes with N‐heterocyclic carbene (NHC) ligands in the catalytic vinyl polymerization of norbornene under a range of conditions. Specifically, two nickel complexes bearing a chelating bis(NHC) ligand, two nickel complexes bearing two chelating anionic N‐donor functionalized NHC ligands as well as one diiodidonickel(II) complex with two monodentate NHC ligands were tested. The solid‐state structure of bis(1,3‐dimethylimidazol‐2‐ylidene)diiodidonickel(II), as determined by X‐ray crystallography, is presented. The highest polymerization activity of 2.6 × 10⁷ g (mol cat)^?1 h^?1 was observed using the latter nickel complex as catalyst, activated by methylaluminoxane. The norbornene polymers thus obtained are of high molecular weight but with rather low polydispersity. Copyright © 2010 John Wiley & Sons, Ltd.     

Highly Selective Iron‐Catalyzed Synthesis of Alkenes by the Reduction of Alkynes

Herein, the iron‐catalyzed reduction of a variety of alkynes with silanes as a reductant has been examined. With a straightforward catalyst system composed of diiron nonacarbonyl and tributyl phosphane, excellent yields and chemoselectivities (>99 %) were obtained for the formation of the corresponding alkenes. After studying the reaction conditions, and the scope and limitations of the reaction, several attempts were undertaken to shed light on the reaction mechanism.     

Chemical composition of the essential oil of Cachrys libanotis from Algeria

The essential oil of aerial parts of Cachrys libanotis L. (Apiaceae) from east Algeria was extracted by hydrodistillation and analyzed by GC-FID and GC-MS. Thirty-one compounds were identified, the main components being germacrene-D (18.0%), gamma-terpinene (6.4%), p-cymene (5.5%), caryophyllene oxide (5.1%), and limonene (5.1%).     

Catalytic C-H bond amination from high-spin iron imido complexes

Dipyrromethene ligand scaffolds were synthesized bearing large aryl (2,4,6-Ph(3)C(6)H(2), abbreviated Ar) or alkyl ((t)Bu, adamantyl) flanking groups to afford three new disubstituted ligands ((R)L, 1,9-R(2)-5-mesityldipyrromethene, R=aryl, alkyl). While high-spin (S=2), four-coordinate iron complexes of the type ((R)L)FeCl(solv) were obtained with the alkyl-substituted ligand varieties (for R=(t)Bu, Ad and solv=THF, OEt(2)), use of the sterically encumbered aryl-substituted ligand precluded binding of solvent and cleanly afforded a high-spin (S=2), three-coordinate complex of the type ((Ar)L)FeCl. Reaction of ((Ad)L)FeCl(OEt(2)) with alkyl azides resulted in the catalytic amination of C-H bonds or olefin aziridination at room temperature. Using a 5% catalyst loading, 12 turnovers were obtained for the amination of toluene as a substrate, while greater than 85% of alkyl azide was converted to the corresponding aziridine employing styrene as a substrate. A primary kinetic isotope effect of 12.8(5) was obtained for the reaction of ((Ad)L)FeCl(OEt(2)) with adamantyl azide in an equimolar toluene/toluene-d(8) mixture, consistent with the amination proceeding through a hydrogen atom abstraction, radical rebound type mechanism. Reaction of p-(t)BuC(6)H(4)N(3) with ((Ar)L)FeCl permitted isolation of a high-spin (S=2) iron complex featuring a terminal imido ligand, ((Ar)L)FeCl(N(p-(t)BuC(6)H(4))), as determined by (1)H NMR, X-ray crystallography, and (57)Fe Mo?ssbauer spectroscopy. The measured Fe-N(imide) bond distance (1.768(2) ?) is the longest reported for Fe(imido) complexes in any geometry or spin state, and the disruption of the bond metrics within the imido aryl substituent suggests delocalization of a radical throughout the aryl ring. Zero-field (57)Fe Mo?ssbauer parameters obtained for ((Ar)L)FeCl(N(p-(t)BuC(6)H(4))) suggest a Fe(III) formulation and are nearly identical with those observed for a structurally similar, high-spin Fe(III) complex bearing the same dipyrromethene framework. Theoretical analyses of ((Ar)L)FeCl(N(p-(t)BuC(6)H(4))) suggest a formulation for this reactive species to be a high-spin Fe(III) center antiferromagnetically coupled to an imido-based radical (J = -673 cm(-1)). The terminal imido complex was effective for delivering the nitrene moiety to both C-H bond substrates (42% yield) as well as styrene (76% yield). Furthermore, a primary kinetic isotope effect of 24(3) was obtained for the reaction of ((Ar)L)FeCl(N(p-(t)BuC(6)H(4))) with an equimolar toluene/toluene-d(8) mixture, consistent with the values obtained in the catalytic reaction. This commonality suggests the isolated high-spin Fe(III) imido radical is a viable intermediate in the catalytic reaction pathway. Given the breadth of iron imido complexes spanning several oxidation states (Fe(II)-Fe(V)) and several spin states (S=0→(3)/(2)), we propose the unusual electronic structure of the described high-spin iron imido complexes contributes to the observed catalytic reactivity.     

Comparison of direct mass spectrometry methods for the on‐line analysis of volatile compounds in foods

For the on‐line monitoring of flavour compound release, atmospheric pressure chemical ionization (APCI) and proton transfer reaction (PTR) combined to mass spectrometry (MS) are the most often used ionization technologies. APCI‐MS was questioned for the quantification of volatiles in complex mixtures, but direct comparisons of APCI and PTR techniques applied on the same samples remain scarce. The aim of this work was to compare the potentialities of both techniques for the study of in vitro and in vivo flavour release. Aroma release from flavoured aqueous solutions (in vitro measurements in Teflon bags and glass vials) or flavoured candies (in vivo measurements on six panellists) was studied using APCI‐ and PTR‐MS. Very similar results were obtained with both techniques. Their sensitivities, expressed as limit of detection of 2,5‐dimethylpyrazine, were found equivalent at 12 ng/l air. Analyses of Teflon bag headspace revealed a poor repeatability and important ionization competitions with both APCI‐ and PTR‐MS, particularly between an ester and a secondary alcohol. These phenomena were attributed to dependency on moisture content, gas/liquid volume ratio, proton affinities and product ion distribution, together with inherent drawbacks of Teflon bags (adsorption, condensation of water and polar molecules). Concerning the analyses of vial headspace and in vivo analyses, similar results were obtained with both techniques, revealing no competition phenomena. This study highlighted the equivalent performances of APCI‐MS and PTR‐MS for in vitro and in vivo flavour release investigations and provided useful data on the problematic use of sample bags for headspace analyses. Copyright © 2013 John Wiley & Sons, Ltd.