Indirect determination of chloride and sulfate ions in alcohol fuel by capillary electrophoresis

A capillary zone electrophoresis method using indirect UV detection for the analysis of chloride and sulfate in alcohol fuel samples was developed. The anions were analyzed in less than 3 min using an electrolyte containing 10 mmol l^–1 chromate and 0.75 mmol l^–1 hexamethonium bromide (HMB) as electroosmotic flow modifier. Coefficients of variation were better than 0.6% for migration time (n=10) and between 2.05 and 2.82% for peak area repeatabilities. Analytical curves of peak area versus concentration in the range of 0.065–0.65 mg kg^–1 for chloride and 0.25–4.0 mg kg^–1 for sulfate were linear with coefficients of correlation higher than 0.9996. The limits of detection for sulfate and chloride were 0.033 and 0.041 mg kg^–1, respectively. Recovery values ranged from 85 to 103%. The method was successfully applied for the quantification of sulfate and chloride in five alcohol fuel samples. The concentration of sulfate varied from 0.45 to 3.12 mg kg^–1. Chloride concentrations were below the methods LOD.     

Influence of spray-dried hydroxyapatite-5-fluorouracil granules on cell lines derived from tissues of mesenchymal origin

In our previous work we described the preparation and characterization of spray dried hydroxyapatite micro granules loaded with 5-fluorouracil (5-FU). These loaded particles are used as a model drug delivery system (DDS). In this study we examined the in vitro response of two cell lines derived from different tissues to 5-FU loaded granules (LG). Both cell lines, either L929 cells of a mouse fibroblast lineage or cells originating from a rat osteosarcoma (ROS 17/2.8) showed a dose dependent decrease in cell proliferation in response to 5-FU-, either dissolved in the culture medium or loaded onto particles. The response of the two cell lines to loaded and nonloaded particles was different. The effect of LG and of a corresponding concentration of free 5-FU was practically the same for the ROS 17/2.8 cells indicating that ROS 17/2.8 cells were not affected by the carrier material. In contrast, L929 cells showed a slight decrease in cell proliferation also in the presence of granules not loaded with 5-FU. This is thought to be attributed to the inhibition of mitogenesis by phosphocitrates, already demonstrated in fibroblasts. In summary, we found that the loaded 5-FU kept its effectivity after the spray drying process and that the response towards the granules varied with cell type. This is the first step towards a tissue specific DDS.     

Dielectrophoretic sorting on a microfabricated flow cytometer: label free separation of Babesia bovis infected erythrocytes

Dielectrophoresis is a method that has demonstrated great potential in cell discrimination and isolation. In this study, the dielectrophoretic sorting of normal and Babesia bovis infected erythrocytes was performed using a microfabricated flow cytometer. Separation was possible through exploitation of the dielectric differences between normal and infected erythrocytes, essentially due to the higher ionic membrane permeability of B. bovis infected cells. Sorting experiments were performed inside a microchip made from Pt microelectrodes and SU-8 channels patterned on a glass substrate. Optimum cell separation was achieved at 4 MHz using an in vitro culture of B. bovis suspended in 63 mS/m phosphate buffer and applying a sinusoidal voltage of 15 V peak-to-peak. Normal erythrocytes experienced stronger positive dielectrophoresis (pDEP) than B. bovis infected cells, moving them closer to the microelectrodes. Under these conditions it was possible to enrich the fraction of infected cells from 7 to 50% without the need of extensive sample preparation or labelling. Throughout the experiments very few microliters of sample were used, suggesting that this system may be considered suitable for integration in a low-cost automated device to be used in the in situ diagnostic of babesiosis.     

Domain Formation in DODAB–Cholesterol Mixed Systems Monitored via Nile Red Anisotropy

The effect of the cholesterol (ch) on liposomes composed of the cationic lipid dioctadecyldimethylammonium bromide (DODAB) was assessed by studying both the steady-state and time-resolved fluorescence anisotropy of the dye Nile Red. The information obtained combined with analysis of the steady-state emission and fluorescence lifetime of Nile Red (NR) for different cholesterol concentrations (5–50%) elucidated the presence of “condensed complexes” and cholesterol-rich domains in these mixed systems. The steady-state fluorescence spectra were decomposed into the sum of two lognormal emissions, emanating from two different states, and the effect of temperature on the anisotropy decay of Nile Red for different cholesterol concentrations was observed. At room temperature, the time-resolved anisotropy decays are indicative of NR being relatively immobile (manifest by a high r _∞ value). At higher temperature, rotational times ca. 1 ns were obtained throughout and a trend in increasing hindrance was seen with increase of Ch content.     

Application of the solvent dimethyl sulfoxide/tetrabutyl-ammonium fluoride trihydrate as reaction medium for the homogeneous acylation of Sisal cellulose

Two types of Sisal cellulose were studied as starting material for homogeneous acylation in the solvent dimethyl sulfoxide (DMSO)/tetrabutylammonium fluoride trihydrate (TBAF). The native Sisal cellulose investigated contains 14% hemicellulose (mainly composed of xylose) as confirmed by ¹³C-NMR spectroscopy in DMSO-d₆/TBAF and HPLC analysis after complete polymer degradation. Alkali treatment of Sisal cellulose decreases the amount of hemicellulose, the degree of polymerization and the crystallinity. Both Sisal cellulose samples can be dissolved in DMSO/TBAF after treatment at elevated temperature. GPC measurements showed high aggregation in the solution. Different homogeneous acylation reactions using carboxylic acid anhydrides and vinyl esters were carried out, showing a pronounced tendency of the anhydride towards hydrolysis in the solvent. This disadvantage can be diminished by decreasing the amount of the salt hydrate (TBAF trihydrate) or by a distillative removal of the majority of water. A strong interaction of the polymer with the water in the solvent was observed.     

Determination of low-aliphatic aldehydes indoors by micellar electrokinetic chromatography using sample dissolution manipulation for signal enhancement

This work describes a novel approach for the analysis of selected aldehydes (formaldehyde, acetaldehyde, propionaldehyde, and acrolein) and acetone in environmental samples using micellar electrokinetic chromatography (MEKC). The method is based on the reaction of carbonyl compounds with 3-methyl-2-benzothiazoline hydrazone (MBTH) that gives an azine intermediate with maximum absorbance at 216 nm. A systematic evaluation of sample dissolution medium was conducted as a means to enhancing sensitivity. In the best condition, samples were dissolved in 0.030 mol.L(-1) tetraborate solution. This condition presented enhancement factors in the range of 35-54 for the aldehydes under investigation, computed as the improvement of the concentration limits of detection (LODs) with reference to the sample dissolved in pure water. The running buffer was 0.020 mol.L(-1) tetraborate, pH 9.3, containing 0.050 mol.L(-1) sodium dodecyly sulfate (SDS). The overall methodology presented several advantages over established methods for aldehydes. Worthy mentioning that MBTH is available in high purity degree, dispensing laborious reagent purification procedures. A few method validation parameters were determined revealing good migration time repeatability (< 2.5% coefficient of variation, CV) and area repeatability (< 4% CV), excellent linearity (20-120 micro g/L, r > 0.995) and adequate sensitivity for environmental applications. The LODs with respect to each single aldehyde were in the range of 0.54-4.0 micro g.L(-1) and 11 micro g.L(-1) for acetone. The methodology was applied to the determination of aldehydes indoors. Samples were collected in an impinger flask containing 0.05% MBTH solution, at a flow rate of 0.80 L.min(-1), during 2.5 h, at different times during the day. The most abundant carbonyls in the samples were acetone, followed by formaldehyde and acetaldehyde, with estimate peak concentrations of 452, 5.2 and 2.2 ppbv, respectively.     

Iminoboronates: a new strategy for reversible protein modification

Protein modification has entered the limelight of chemical and biological sciences, since, by appending small molecules into proteins surfaces, fundamental biological and biophysical processes may be studied and even modulated in a physiological context. Herein we present a new strategy to modify the lysine's ε-amino group and the protein's N-terminal, based on the formation of stable iminoboronates in aqueous media. This functionality enables the stable and complete modification of these amine groups, which can be reversible upon the addition of fructose, dopamine, or glutathione. A detailed DFT study is also presented to rationalize the observed stability toward hydrolysis of the iminoboronate constructs.     

Quantification approach for assessment of sparkling wine volatiles from different soils, ripening stages, and varieties by stir bar sorptive extraction with liquid desorption

Stir bar sorptive extraction with liquid desorption followed by large volume injection coupled to gas chromatography-quadrupole mass spectrometry (SBSE-LD/LVI-GC-qMS) was applied for the quantification of varietal and fermentative volatiles in sparkling wines. The analytical data were performed by using suitable standards of monoterpene hydrocarbons (α-pinene), monoterpenols (linalool), sesquiterpenoids (E,E-farnesol, Z-nerolidol, and guaiazulene), C₁₃ norisoprenoids (β-ionone), aliphatic and aromatic alcohols (hexanol and 2-phenylethanol), and esters (hexyl acetate and ethyl decanoate) as model compounds. The wine volatiles were quantified using the structurally related standards. The methodology showed good linearity over the concentration range tested, with correlation coefficients ranging from 0.950 to 0.997, and a reproducibility of 9-18%. The SBSE-LD/LVI-GC-qMS methodology allowed, in a single run, the quantification of 71 wine volatiles that can be quantified accurately at levels lower than their respective olfactory thresholds. This methodology was used for assessment of sparkling wine volatiles from different soils, ripening stages, and varieties. The variety and soil influenced significantly the volatile composition of sparkling wines; lower effect was observed for the ripening stage of grapes picked up one week before or after the maturity state.     

Fluorescence properties of a potential antitumoral benzothieno[3,2-b]pyrrole in solution and lipid membranes

Fluorescence properties of the antitumoral methyl 3-(benzo[b]thien-2-yl)-benzothieno[3,2-b]pyrrole-2-carboxylate (BTP) were studied in solution and in lipid bilayers of dipalmitoyl phosphatidylcholine (DPPC), dioleoyl phosphatidylethanolamine (DOPE) and egg yolk phosphatidylcholine (Egg-PC). BTP presents good fluorescence quantum yields in all solvents studied (0.20 ≤ Φ_F ≤ 0.32) and a bathochromic shift in polar solvents. The results indicate an ICT character of the excited state, with an estimated dipole moment of μ_e = 7.38 D.Fluorescence (steady-state) anisotropy measurements of BTP incorporated in lipid membranes of DPPC, DOPE and Egg-PC indicate that this compound is deeply located in the lipid bilayer, feeling the difference between the rigid gel phase and fluid phases.BTP inhibits the growth of three human tumour cell lines, MCF-7 (breast adenocarcinoma), SF-268 (glioma) and NCI-H460 (non-small cell lung cancer), being significantly more potent against the NCI-H460 tumour cells.     

Profiling changes triggered during maturation of dendritic cells: a lipidomic approach

Lipids are important in several biological processes because they act as signalling and regulating molecules, or, locally, as membrane components that modulate protein function. This paper reports the pattern of lipid composition of dendritic cells (DCs), a cell type of critical importance in inflammatory and immune responses. After activation by antigens, DCs undergo drastic phenotypical and functional transformations, in a process known as maturation. To better characterize this process, changes of lipid profile were evaluated by use of a lipidomic approach. As an experimental model of DCs, we used a foetal skin-derived dendritic cell line (FSDC) induced to mature by treatment with lipopolysaccharide (LPS). The results showed that LPS treatment increased ceramide (Cer) and phosphatidylcholine (PC) levels and reduced sphingomyelin (SM) and phosphatidylinositol (PI) content. Mass spectrometric analysis of a total lipid extract and of each class of lipids revealed that maturation promoted clear changes in ceramide profile. Quantitative analysis enabled identification of an increase in the total ceramide content and enhanced Cer at m/z 646.6, identified as Cer(d18:1/24:1), and at m/z 648.6, identified as Cer(d18:1/24:0). The pattern of change of these lipids give an extremely rich source of data for evaluating modulation of specific lipid species triggered during DC maturation.