Properties of Co-Mo coatings obtained by electrodeposition at pH 6.6

Cobalt-molybdenum coatings were prepared by electrodeposition in a sulfate-citrate bath and their morphology, structure and magnetic properties were analysed. Concentrations of 0.1 mol dm^–3 CoSO₄ and 0.005 mol dm^–3 Na₂MoO₄ at pH 6.6 led to Co-Mo deposits of 20–23% Mo that can be grown to several microns over graphite or copper substrates. At low deposition potentials or current densities, the deposits presented a close-packed hexagonal structure (hcp) that evolved to a (100)+(110) preferred orientation and acicular morphology as the deposit thickness increased. When the deposition potential or the current density was made more negative, a mixed crystalline+amorphous structure was obtained. The degree of crystallinity depended on the thickness: thin films were more amorphous than the thicker ones. Co-Mo deposits showed lower saturation magnetization (M_s) and coercivity (H_c) than the pure cobalt deposits. The crystalline+amorphous films showed the lowest H_c values (around 40 Oe).     

Electrodeposition for obtaining homogeneous or heterogeneous cobalt-copper films

Direct electrodeposition of heterogeneous deposits may be an alternative method for preparing cobalt-copper coatings with magnetoresistive properties. Co-Cu electrodeposition was obtained in sulfate baths containing different citrate concentrations in order to prepare either homogeneous or heterogeneous Co-Cu deposits. X-ray diffraction (XRD) and voltammetric stripping analysis were used to study the kind of deposits formed. Citrate-free baths produced heterogeneous films, although dendritic growth was observed, thus increasing the deposit's thickness. Increasing the Cu(II)/Co(II) ratio in solution enabled the formation of smoother deposits. The presence of citrate at up to twice the total metallic concentration in the bath improved the morphological aspects of the deposits, their structural heterogeneity being maintained. Higher citrate concentrations induced the loss of heterogeneity, and both electrochemical and diffraction peaks tended towards single peaks. Homogeneous Co-Cu deposits, formed by a solid solution structure, were obtained in highly complexed citrate baths.     

Triggering Activity of Catalytic Rod‐Like Supramolecular Polymers

Supramolecular polymers based on benzene‐1,3,5‐tricarboxamides (BTAs) functionalized with an L ‐ or D ‐proline moiety display high catalytic activity towards aldol reactions in water. High turnover frequencies (TOF) of up to 27×10^?4 s^?1 and excellent stereoselectivities (up to 96 % de, up to 99 % ee) were observed. In addition, the catalyst could be reused and remained active at catalyst loadings and substrate concentrations as low as 0.1 mol % and 50 mM , respectively. A temperature‐induced conformational change in the supramolecular polymer triggers the high activity of the catalyst. The supramolecular polymer’s helical sense in combination with the configuration of the proline (L ‐ or D ‐) is responsible for the observed selectivity.     

Delta2D and Proteomweaver: Performance evaluation of two different approaches for 2‐DE analysis

2‐DE is a fundamental technology used in proteomics research. However, despite its high capacity to simultaneously separate several proteins for subsequent identification and quantitative comparison studies, a drawback for this technique is its limited reproducibility, especially when comparing data from different laboratories. 2‐DE‐related variability can be broadly divided into two categories: experimental and post‐experimental. Experimental variability depends on physical and chemical parameters, whereas post‐experimental variability arises when gels are analyzed by different software packages, particularly when different workflows are followed. In this paper, we compared the analysis performance of two software packages, Delta2D and Proteomweaver, using both standard and experimental gel images. Using standard gel images, the false negative spot count was 50% lower, the false positive count was 77% lower, the true positive count was 19% higher and spot matching was 4% higher in Delta2D when compared to Proteomeweaver. Using experimental gel images, we found that the total amount of time taken to complete the analysis with Delta2D was 30% that of the time needed with Proteomweaver and required fewer user interventions. The differences between ease of use and workflow strategy of these programs is discussed.     

Trifluoroacetic Acid in 2,2,2‐Trifluoroethanol Facilitates SNAr Reactions of Heterocycles with Arylamines

Small‐molecule drug discovery requires reliable synthetic methods for attaching amino compounds to heterocyclic scaffolds. Trifluoroacetic acid‐2,2,2‐trifluoroethanol (TFA‐TFE) is as an effective combination for achieving S_NAr reactions between anilines and heterocycles (e.g., purines and pyrimidines) substituted with a leaving group (fluoro‐, chloro‐, bromo‐ or alkylsulfonyl). This method provides a variety of compounds containing a “kinase‐privileged fragment” associated with potent inhibition of kinases. TFE is an advantageous solvent because of its low nucleophilicity, ease of removal and ability to solubilise polar substrates. Furthermore, TFE may assist the breakdown of the Meisenheimer–Jackson intermediate by solvating the leaving group. TFA is a necessary and effective acidic catalyst, which activates the heterocycle by N‐protonation without deactivating the aniline by conversion into an anilinium species. The TFA‐TFE methodology is compatible with a variety of functional groups and complements organometallic alternatives, which are often disadvantageous because of the expense of reagents, the frequent need to explore diverse sets of reaction conditions, and problems with product purification. In contrast, product isolation from TFA‐TFE reactions is straightforward: evaporation of the reaction mixture, basification and chromatography affords analytically pure material. A total of 45 examples are described with seven discrete heterocyclic scaffolds and 2‐, 3‐ and 4‐substituted anilines giving product yields that are normally in the range 50–90 %. Reactions can be performed with either conventional heating or microwave irradiation, with the latter often giving improved yields.     

Field-deployable whole-cell bioluminescent biosensors: so near and yet so far

The use of smart supports and bioinspired materials to confine living cells and use them for field-deployable biosensors has recently attracted much attention. In particular, bioluminescent whole-cell biosensors designed to respond to different analytes or classes of analyte have been successfully implemented in portable and cost-effective analytical devices. Significant advances in detection technology, biomaterial science, and genetic engineering of cells have recently been reported. Now the challenge is to move from benchtop traditional cell-based assays to portable biosensing devices. Improvement of the analytical performance of these biosensors depends on the availability of optimized bioluminescent reporters, and promising approaches that go beyond reporter gene technology are emerging. To enable handling of cells as ready-to-use reagents, nature-inspired strategies have been used, with the objective of keeping cells in a dormant state until use. Several issues must still be investigated, for example long-term viability of cells, the possibility of performing real-time analysis, and multiplexing capability.

Dephosphorylation reactions with deferoxamine, a potential chemical nuclease

We report a detailed kinetic and mechanistic study of the reaction of a widely used therapeutic agent, deferoxamine (DFO), which contains three nucleophilic hydroxamate groups, with the model phosphate diester bis-2,4-dinitrophenylphosphate BDNPP. We clarify the mechanism by detecting important phosphorylated intermediates in the model reaction and show that the mechanism can be extended to the reaction with DNA. The effectiveness of DFO in cleaving DNA was examined over a range of pH in the absence and presence of a biologically available metal (Zn(2+)). The results inform and complement ongoing studies involving DFO, which can act as a powerful nucleophile toward DNA and other targets susceptible to nucleophilic attack.     

Detailed Characterization of the Dynamics of Ibuprofen in the Solid State by a Multi‐Technique NMR Approach

The internal rotations and interconformational jumps of ibuprofen in the solid state are fully characterized by the simultaneous analysis of a variety of low‐ and high‐resolution NMR experiments for the measurement of several ¹³C and ¹H spectral and relaxation properties, performed at different temperatures and, in some cases, frequencies. The results are first qualitatively analyzed to identify the motions of the different molecular fragments and to assign them to specific frequency ranges (slow, <10³ Hz; intermediate, 10³–10⁶ Hz; and fast, >10⁶ Hz). In a second step, a simultaneous fit of the experimental data sets most sensitive to each frequency range is performed by means of suitable motional models to obtain, for each motion, values of correlation times and activation energies. The rotations of the three methyl groups around their ternary symmetry axes, which occur in the fast regime, are characterized by slightly different activation energies. Thanks to the simultaneous analysis of ¹H and ¹³C data, the π‐flip of the dimeric structure made by the acidic groups is also identified and seen to occur in the fast regime. On the contrary, the π‐flip of the phenyl ring is found to occur in the slow motional regime, while the rotations of the isobutyl and propionic groups are frozen. The approach used appears to be of general applicability for studying the dynamics of small organic molecules.     

Electroanalytical Performance of (SiPy+Cl−/CuTsPc)5 LbL Film for Detecting Promethazine Hydrochloride

A (SiPy⁺Cl^?/CuTsPc)₅ layer‐by‐layer film was employed for the electroanalytical determination of promethazine hydrochloride in BR buffer pH 5.0 with peaks at 0.48 and 0.79 V. After optimisation of the square‐wave parameters (f=100 s^?1, a=40 mV and ΔE_s=2 mV), the peak at 0.79 V was used for quantification and a detection limit of 8.71×10^?9 mol L^?1 and a quantification limit of 9.31×10^?8 were calculated. The applicability of this procedure was tested on commercial formulations of promethazine hydrochloride by observing the stability, specificity, recovery and precision of the procedure in complex samples, without any preliminary treatment.