Langmuir-Blodgett films of hydrophobins HFBI and HFBII

Hydrophobins are small fungal proteins, which have remarkable surface-chemical properties. They self-assemble at hydrophobic/hydrophilic interfaces and work as adhesive agents and coatings. Sixteen layer Langmuir-Blodgett films of hydrophobins HFBI and HFBII from the fungus Trichoderma reesei were prepared and studied using grazing-incidence X-ray diffraction and reflectivity techniques. Both kind of films contain hexagonally ordered crystallites on the substrate with unit cell parameters of a = b = 54 Å (HFBI) and a = b = 55 Å (HFBII). The structure is similar to the structure of monolayer Langmuir-Blodgett films.     

Adsorption of block copolymers in nanoporous alumina

We have studied the adsorption of end-attaching block copolymer chains inside the cylindrical pores of nanoporous alumina. Highly asymmetric PS-PEO block copolymers, with a small PEO anchoring block and a long PS dangling block, were allowed to adsorb onto porous alumina substrates with an average pore diameter of ∼200 nm from toluene solution. The adsorption process was monitored using FTIR spectroscopy, whereas depth profile analysis was performed by means of XPS and Ar⁺ ion sputtering. It is found that the PS-PEO adsorption kinetics in porous alumina are ∼4 orders of magnitude slower than the corresponding case of a flat alumina substrate. It appears that chains adsorbed near the pore entrance early on tend to form a barrier for chains entering the pore at later times, thereby slowing down the adsorption process significantly. This effect is much more pronounced for large chains whose dimensions are comparable with the pore diameter. The equilibrium adsorbance value is also affected by chain size due to the additional entropic penalty associated with chain confinement, the adsorbance falling substantially when the chain dimensions become comparable with the pore diameter. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1676–1682, 2010     

High‐energy‐resolution diced spherical quartz analyzers for resonant inelastic X‐ray scattering

A novel diced spherical quartz analyzer for use in resonant inelastic X‐ray scattering (RIXS) is introduced, achieving an unprecedented energy resolution of 10.53 meV at the Ir L₃ absorption edge (11.215 keV). In this work the fabrication process and the characterization of the analyzer are presented, and an example of a RIXS spectrum of magnetic excitations in a Sr₃Ir₂O₇ sample is shown.     

A nine-dimensional calculation of the vibrational OH stretching and HOH bending spectrum of the water trimer

We have studied the vibrational high-frequency spectrum of the water trimer computationally. We expand an earlier study [J. Chem. Phys. A 2009, 113, 9124-9132] where we approximated the water trimer as three individually vibrating water monomer units. Some intramolecular potential energy coupling terms are now included in the previous model. The six OH bond lengths and the three HOH bending angles are used as the internal coordinates. The kinetic energy operator is a sum of the kinetic energy operators of the monomer units. We use the coupled cluster method with single, double, and perturbative triple excitations method [CCSD(T)] with augmented correlation consistent polarized valence triple-ζ (aug-cc-pVTZ) basis set to calculate the potential energy surface (PES). The counterpoise correction is included in the one-dimensional part of the PES. We calculate the vibrational energy eigenvalues using the variational method. The corresponding eigenfunctions are used to obtain the absorption intensities.     

N-oxides in the quinoxaline series

Acyl derivatives of 2-aminoquinoxaline and their 1-N -oxides, as well as methyl derivatives of some of those compounds, are synthesized. IR spectra of these compounds in the solid state, and UV spectra of their solutions, showed that, with respect to the ability of its 2-acylamino derivatives to tautomerize to the imido form, quinoxaline is close to pyrimidine, and below quinoline and pyridine. With respect to the amideimide tautomerism equilibrium position, N-oxides of 2-acylaminoquinoxalines differ little from acylamides of quinoxaline themselves. The action of benzene sulfochloride on 2-aminoquinoxaline-1-N-oxide in pyridine below 0°leads to deoxidation of the N O group, and introduction of the benzene sulfonyloxy group at position 3 in the quinoxaline ring.For Part VIII see [17].     

Orthogonal and unitary tensor decomposition from an algebraic perspective

While every matrix admits a singular value decomposition, in which the terms are pairwise orthogonal in a strong sense, higher-order tensors typically do not admit such an orthogonal decomposition. Those that do have attracted attention from theoretical computer science and scientific computing. We complement this existing body of literature with an algebro-geometric analysis of the set of orthogonally decomposable tensors.More specifically, we prove that they form a real-algebraic variety defined by polynomials of degree at most four. The exact degrees, and the corresponding polynomials, are different in each of three times two scenarios: ordinary, symmetric, or alternating tensors; and real-orthogonal versus complex-unitary. A key feature of our approach is a surprising connection between orthogonally decomposable tensors and semisimple algebras—associative in the ordinary and symmetric settings and of compact Lie type in the alternating setting.     

Noncovalent complexation of glucosylthioureidocalix[4]arenes with carboxylates and their gas-phase characteristics: an ESI-FTICR mass spectrometric study

The noncovalent complexation of three glucosylcalix[4]arenes (1-3) towards 23 mono- and dicarboxylic acid anions were studied by ESI-FTICR mass spectrometry. Competitive complexation, collision-induced dissociation and gas-phase H/D-exchange experiments were performed to obtain information on selectivity of calixarenes towards carboxylates and characteristics of their complexes. The flexibility and number of glucose units of the host and the spatial disposition of the hydrogen bonding groups on the carboxylate guests were found to affect the selectivity of complexation strongly. The glucosylcalixarenes exhibited particular selectivity for dicarboxylic acid anions incorporating π-systems, and clear isomeric selectivity was observed for isophthalic among phthalic acid anions and for fumaric acid over maleic acid anion.     

Investigation of sulphur compounds in coal tar using monodimensional and comprehensive two-dimensional gas chromatography

Coal is a non renewable fossil fuel, used mainly as a source of electrical energy and in the production of coke. It is subjected to thermal treatment, pyrolysis, which produces coke as a main product, in addition to a condensed liquid by-product, called tar. Tar is a complex mixture of organic compounds which contains different chemical classes, presenting aromatic and sulphur heterocyclic compounds. In general, identification of these compounds requires steps of isolation and fractionation, mainly due to co-elution of these compounds with polyaromatic hydrocarbons (PAH). The objective of this work is to characterize the sulphur compounds present in the coal tar obtained via pyrolysis, using comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry detector (GC×GC/TOFMS). Coal samples from the State of Paraná, Brazil were subjected to laboratorial scale pyrolysis. Several experimental conditions were tested, such as sample weight (5, 10 and 15g), heating ramp (10, 25 and 100°C/min) and final temperature (500, 700 and 900°C). Samples were analyzed by one dimensional gas chromatography (1D-GC) coupled to a quadrupole mass spectrometry detector (GC/qMS) and two-dimensional gas chromatography with time-of-flight mass spectrometry detector (GC×GC/TOFMS). The higher amount of sulphur compounds was obtained at a final temperature of 700°C and a heating ramp of 100°C/min. The main classes observed in the color plot were thiophenes, benzothiophenes and alkylated dibenzothiophenes. GC×GC/TOFMS allowed the identification of the greater number of compounds and the separation of several sulphur compounds from one another. Moreover, separation of sulphur compounds from polyaromatic hydrocarbons and phenols was achieved, which was not possible by 1D-GC. Comparing GC×GC/TOFMS and 1D-GC (SIM mode) also showed that 1D-GC, one of the most employed quantification tools for sulphur compounds, can be misleading for detection, identification and quantification, as the number of isomers of sulphur compounds found was greater than theoretically possible.     

Synthesis,Self-Assembly in Crystalline Phase and Anti-Tumor Activity of 2-(2-/4-Hydroxybenzylidene)thiazolo[3,2-a]pyrimidines

A series of new thiazolo[3,2-a]pyrimidines different by aryl substituents in 2 and 5 positions are synthesized and characterized in solution as well as in the crystalline phase using ¹H and ¹³C NMR-, IR-spectroscopies, mass-spectrometry methods, and single crystal X-ray diffraction (SCXRD). The SCXRD study revealed the role of intermolecular H-bonding in the formation of supramolecular architectures (racemic monomers, centrosymmetric racematic dimers, or homochiral 1D chains) of obtained thiazolo[3,2-a]pyrimidines derivatives depending on solvents (aprotic DMSO or protic EtOH) used upon the crystallization process. Moreover, the in vitro study of cytotoxicity toward different tumor cells showed their high or moderate efficiency with moderate cytotoxicity against normal liver cells which allows to consider the obtained thiazolo[3,2-a]pyrimidine derivatives as promising candidates for application as antitumor agents.     

Detector technologies for comprehensive two-dimensional gas chromatography

The detector is an integral and important part of any chromatographic system. The chromatographic peak profiles (i.e. peak separation) should, ideally, be unaffected by the detector--it should only provide the sensing capacity required at the end of a column separation process. The relatively new technique of comprehensive 2-D GC (GC x GC) extends the performance of GC manyfold, but comes at a price--existing GC systems may not be adequately designed with the requirements of GC x GC in mind. This is primarily the need for precise measurement of very fast peaks entering the detector (e.g. as fast as 50 ms basewidth in some instances). The capacity of the detector to closely track a rapidly changing chromatographic peak profile depends on a number of factors, such as design of flow paths and make-up gas introduction, type of detector response mechanism, and the chemistry of the response. These factors are discussed here as a means to appreciate the technical demands of detection in GC x GC. The MS detector will not be included in this review.