Noncovalent complexation of glucosylthioureidocalix[4]arenes with carboxylates and their gas-phase characteristics: an ESI-FTICR mass spectrometric study

The noncovalent complexation of three glucosylcalix[4]arenes (1-3) towards 23 mono- and dicarboxylic acid anions were studied by ESI-FTICR mass spectrometry. Competitive complexation, collision-induced dissociation and gas-phase H/D-exchange experiments were performed to obtain information on selectivity of calixarenes towards carboxylates and characteristics of their complexes. The flexibility and number of glucose units of the host and the spatial disposition of the hydrogen bonding groups on the carboxylate guests were found to affect the selectivity of complexation strongly. The glucosylcalixarenes exhibited particular selectivity for dicarboxylic acid anions incorporating π-systems, and clear isomeric selectivity was observed for isophthalic among phthalic acid anions and for fumaric acid over maleic acid anion.     

Investigation of sulphur compounds in coal tar using monodimensional and comprehensive two-dimensional gas chromatography

Coal is a non renewable fossil fuel, used mainly as a source of electrical energy and in the production of coke. It is subjected to thermal treatment, pyrolysis, which produces coke as a main product, in addition to a condensed liquid by-product, called tar. Tar is a complex mixture of organic compounds which contains different chemical classes, presenting aromatic and sulphur heterocyclic compounds. In general, identification of these compounds requires steps of isolation and fractionation, mainly due to co-elution of these compounds with polyaromatic hydrocarbons (PAH). The objective of this work is to characterize the sulphur compounds present in the coal tar obtained via pyrolysis, using comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry detector (GC×GC/TOFMS). Coal samples from the State of Paraná, Brazil were subjected to laboratorial scale pyrolysis. Several experimental conditions were tested, such as sample weight (5, 10 and 15g), heating ramp (10, 25 and 100°C/min) and final temperature (500, 700 and 900°C). Samples were analyzed by one dimensional gas chromatography (1D-GC) coupled to a quadrupole mass spectrometry detector (GC/qMS) and two-dimensional gas chromatography with time-of-flight mass spectrometry detector (GC×GC/TOFMS). The higher amount of sulphur compounds was obtained at a final temperature of 700°C and a heating ramp of 100°C/min. The main classes observed in the color plot were thiophenes, benzothiophenes and alkylated dibenzothiophenes. GC×GC/TOFMS allowed the identification of the greater number of compounds and the separation of several sulphur compounds from one another. Moreover, separation of sulphur compounds from polyaromatic hydrocarbons and phenols was achieved, which was not possible by 1D-GC. Comparing GC×GC/TOFMS and 1D-GC (SIM mode) also showed that 1D-GC, one of the most employed quantification tools for sulphur compounds, can be misleading for detection, identification and quantification, as the number of isomers of sulphur compounds found was greater than theoretically possible.     

N-oxides in the quinoxaline series

Acyl derivatives of 2-aminoquinoxaline and their 1-N -oxides, as well as methyl derivatives of some of those compounds, are synthesized. IR spectra of these compounds in the solid state, and UV spectra of their solutions, showed that, with respect to the ability of its 2-acylamino derivatives to tautomerize to the imido form, quinoxaline is close to pyrimidine, and below quinoline and pyridine. With respect to the amideimide tautomerism equilibrium position, N-oxides of 2-acylaminoquinoxalines differ little from acylamides of quinoxaline themselves. The action of benzene sulfochloride on 2-aminoquinoxaline-1-N-oxide in pyridine below 0°leads to deoxidation of the N O group, and introduction of the benzene sulfonyloxy group at position 3 in the quinoxaline ring.For Part VIII see [17].     

Detector technologies for comprehensive two-dimensional gas chromatography

The detector is an integral and important part of any chromatographic system. The chromatographic peak profiles (i.e. peak separation) should, ideally, be unaffected by the detector--it should only provide the sensing capacity required at the end of a column separation process. The relatively new technique of comprehensive 2-D GC (GC x GC) extends the performance of GC manyfold, but comes at a price--existing GC systems may not be adequately designed with the requirements of GC x GC in mind. This is primarily the need for precise measurement of very fast peaks entering the detector (e.g. as fast as 50 ms basewidth in some instances). The capacity of the detector to closely track a rapidly changing chromatographic peak profile depends on a number of factors, such as design of flow paths and make-up gas introduction, type of detector response mechanism, and the chemistry of the response. These factors are discussed here as a means to appreciate the technical demands of detection in GC x GC. The MS detector will not be included in this review.     

The fixed charge transportation problem: a strong formulation based on Lagrangian decomposition and column generation

We propose an inexact proximal bundle method for constrained nonsmooth nonconvex optimization problems whose objective and constraint functions are known through oracles which provide inexact information. The errors in function and subgradient evaluations might be unknown, but are merely bounded. To handle the nonconvexity, we first use the redistributed idea, and consider even more difficulties by introducing inexactness in the available information. We further examine the modified improvement function for a series of difficulties caused by the constrained functions. The numerical results show the good performance of our inexact method for a large class of nonconvex optimization problems. The approach is also assessed on semi-infinite programming problems, and some encouraging numerical experiences are provided.     

A novel approach to the quantification of urinary aryl-propionamide-derived SARMs by UHPLC–MS/MS

A simple and sensitive procedure for the quantification of two commonly abused aryl-propionamide-derived selective androgen receptor modulators (SARMs), namely S-4 (GTx-007, andarine) and S-22 (GTx-024, MK-2866, ostarine, enobosarm), has been described. Urine samples were prepared for analysis by means of a dispersive liquid–liquid microextraction using methanol and chloroform as dispersive and extracting solvents, respectively. Factors that might influence the extraction process as well as their optimum conditions were evaluated by Box–Benken and central composite designs. After extraction, the analytes were quantified by UHPLC–MS/MS. The proposed procedure was validated on human urine samples. As a result, for both SARMs the detection limits were observed at 0.05 ng/mL and calibration curves were linear in the concentration range of 0.25–50 ng/mL with the coefficient of determination of 0.998.     

Nonlinear optical and structural properties of langmuir-blodgett films of thiohelicenebisquinones

We provide a detailed investigation of the second-order nonlinear optical and structural properties of Langmuir-Blodgett (LB) films of nonracemic thiohelicenebisquinone (THBQ). We prepare both X- and Y-type films of different thicknesses and characterize them using optical second-harmonic generation and atomic-force microscopy (AFM). We find that the overall nonlinear properties of the samples are essentially independent of the film thickness and the deposition type and arise from susceptibility tensor components associated with chirality. Both X- and Y-type films can be described by D2 symmetry, which is a higher symmetry than the previously assumed C2 of LB films of THBQ and a similar helicenebisquinone (HBQ). However, the two types of films are shown to differ significantly with respect to the orientation of the in-plane axis. For Y type, the axis follows the direction of vertical sample deposition, but for X type, the direction of the axis varies randomly and significantly between different samples. The Y-type samples are therefore more ordered than the X-type samples. This was confirmed by AFM measurements in which the Y type exhibits uniform ordering into columnar structures. Similar structures in X type, on the other hand, are shorter and more randomly oriented, like those earlier observed for racemic samples of HBQ [Verbiest, T., et al. Science 1998, 282, 913]. The common nonlinear properties and different high-level ordering observed here for two different types of nonracemic samples reinforces that the nonlinearity of THBQ (and probably HBQ, as well) originates from the low-level columnar aggregation of the molecules with the higher-level structures playing a lesser role. In addition, within the columns, the molecules likely assume fairly random azimuthal orientations so that the columns themselves exhibit approximate Dinfinity symmetry.     

Synthesis, characterization, and saccharide binding studies of bile acid-porphyrin conjugates

Synthesis and characterization of bile acid-porphyrin conjugates (BAPs) are reported. Binding of saccharides with BAPs in aqueous methanol was studied by monitoring changes in the visible absorption spectral of the porphyrin-moieties. Although these studies clearly showed absorbance changes, suggesting quite high if non-selective binding, the mass spectral studies do not unambiguously support these results.     

Curing kinetics and glass‐transition temperature of hexamethylene diisocyanate‐based polyurethane

The curing process of hexamethylene diisocyanate‐based polyurethane has been monitored by applying FTIR and DSC methods. A general relationship between glass‐transition temperature (T_g) and conversion of curing process has been obtained. This suggests that the reaction path and the relative reaction rates are independent of the curing temperature. The reaction kinetics of the system is analyzed using the T_g data converted to the conversion of the curing process. A set of experimental data and one theoretical model of T_g versus chemical conversion are presented to prove the assumption where a direct one‐to‐one relationship between the T_g (as measured) and the chemical conversion is obtained. Apparent activation energies (E_a) obtained by applying three different methods suggest good agreement. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2213–2220, 2000