Determination of some phthalate acid esters in artificial saliva by gas chromatography-mass spectrometry after activated carbon enrichment

The determination of six phthalate acid esters was achieved in artificial saliva using gas chromatography-mass spectrometry following activated carbon enrichment of samples. Central composite experimental design was applied to optimize method parameters, such as pH, adsorption time and amount of activated carbon. The best compromise of analytical conditions for the simultaneous determination of analytes from spiked artificial saliva were found to be: pH (3), adsorption time (30 min), activated carbon amount (1.8 g L⁻¹) and elution solvent (chloroform). These conditions were applied to study the migration of phthalate acid esters from different children's toys into saliva. A horizontal agitation method was applied to extract the analytes from plastic toys into saliva for 2 h at 37 °C. The detection limits of the method were in the range of 1.3-5.1 μg L⁻¹, while the relative standard deviation (%) values for the analysis of 100 μg L⁻¹ of the analytes were below 3.0% (n = 5). Di-2-ethylhexyl phthalate was the main analyte found in these samples.     

Structural properties of new spiro-1,3-propanediaminocyclotriphosphazene derivatives

New 1,3-propanediaminocyclotriphosphazene derivatives (7-17) were synthesized from the reactions of spiro-1,3-propanediaminocyclotriphosphazene, N₃P₃Cl₄[NH(CH₂)₃NH] (1) with the cyclopropanemethylamine (2), cyclohexylamine (3), pyrrolidine (4) cyclohexanol (5), cyclopropylmethanol (6). The structures of the novel compounds (7-17) were characterized by elemental analysis, mass spectrometry, ¹H and ³¹P NMR spectroscopy. The molecular structures of 8, 12 and 13 were determined by X-ray crystallography. The structures of all these three compounds are in the monoclinic crystal system; compounds 8 and 12 have the P21/c space group while compound 13 has the P21/n space group. The ring conformation of the cyclotriphosphazene and other external rings were investigated based on the X-ray crystal structures.     

Interactions of Imidazolium Based Ionic Liquids with Water Studied by Density and Speed of Sound Measurements: Effect of the Chain Length of an Alkyl Substituent on the Imidazolium Ion

Densities and speeds of sound of three ionic liquids (ILs), 1-ethyl-3-methyl imidazoliumtetrafluoroborate (C₂mimBF₄), 1-butyl-3-methylimidazoliumtetrafluoroborate (C₄mimBF₄) and 1-hexyl-3-methylimidazoliumtetrafluoroborate (C₆mimBF₄) were measured in aqueous solutions at (288.15, 293.15, 298.15, 303.15 and 308.15) K. These data were used to calculate the volumetric properties apparent molar volume and apparent molar isentropic compression as a function of molality. Infinite dilution values for these properties were evaluated by an extrapolation procedure based on Redlich–Meyer type equations. Apparent molar isobaric expansions at infinite dilution were also obtained from the slopes of the apparent molar volume at infinite dilution versus temperature. All these properties are interpreted in terms of IL–water interactions. The hydrolysis of the \( {\text{BF}}_{4}^{ - } \) anion of the ILs and its effects on the results is discussed.     

Optimizing the performance of single-mode laser diode system using genetic algorithm

In this correspondence, micro-genetic algorithm (MGA) application results for optimizing the performance of electronic feedback of a laser diode are presented. The goal of optimization is to find the maximum bandwidth of the laser diode with electronic feedback used in fiber optic digital communication. A numerical analysis of the system theory of the single-mode laser diode to obtain numerical results of the gain, the pulse response, and the harmonic distortion for electronic feedback is also presented. The dependence of the system gain on the feedback gain and delay is examined. The pulse response is studied and it is shown that a transmission rate over 1 Gbyte/s can be achieved.     

Structure and characterization of N-(2-hydroxy-1-naphthylidene)threonine

Threonine Schiff base derived 2-hydroxy-1-naphthaldehyde and threonine has been isolated and investigated. The stoichiometry of this compound was derived from the results of elemental analyses, IR, ¹H-NMR and UV spectroscopic techniques. X-ray diffraction method was also used to obtain the single-crystal structure. The compound crystallizes in the space group P2₁ with cell dimensions a=5.109(2), b=11.334(2), and β=91(3)° with Z=2. The molecule has phenol-imine tautomeric form in the crystal structure. Some of bond lengths and angles found in the molecular structure are distorted due to π-electron delocalization and steric effect of naphthylidene and threonine groups.     

Microstructural properties of sintered Al–Cu–Mg–Sn alloys

A non-commercial Al4Cu0.5Mg alloy has been used for investigating the effects of the elemental Sn additions. Uniaxial die compaction response of the alloys in terms of green density was examined, and the results showed that Sn addition has no effect when compacting conducted under high pressures. In total, 93–95% green density was achieved with an applied pressure of 400 MPa. Thermal events occurring during the sintering of the emerging alloys were studied by using differential scanning calorimetry (DSC). First thermal event on the DSC analysis of the Al4Cu0.5Mg1Sn alloy is the melting of elemental Sn, whereas for Al4Cu0.5Mg alloy, it is the formation of Al–Mg liquid nearly at 450 °C. Also it is clearly seen on the DSC analysis that Sn addition led to an increase in the formation enthalpy of Al–Mg liquid phase. High Sn content and high sintering temperature (620 °C), therefore high liquid-phase content, caused decrease on the mechanical properties due to thick intergranular phases and grain coarsening. Highest transverse rupture strength and hardness values were obtained from Al4Cu0.5Mg0.1Sn alloy sintered at 600 °C and measured as 390 MPa and 73 HB, respectively.     

Chemical composition,antimicrobial, and lipase enzyme activity of essential oil and solvent extracts from Serapias orientalis subsp. orientalis

The volatile components of essential oil (EO), SPME, and SPME of solvent extracts ( n -hexane, methanol, and water) obtained from fresh Serapias orientalis subsp. orientalis ( Soo ) were analyzed by GC-FID/MS. EO of Soo gave 11 compounds in the percentage of 99.97%; capronaldehyde (37.01%), 2-( E )-hexenal (23.19%), and n -nonanal (19.05%) were found to be major constituents. SPME GC-FID/MS analyses of fresh plant and solvent extracts of Soo revealed 7, 12, 7, and 4 compounds within the range of 99.7% to 99.9%. Limonene (76.5%, 41.7%, and 61.3%) was the major compound in SPMEs of the n -hexane and methanol extracts. α -Methoxy- p -cresol (52.9%) was the main component in its water extract. The antimicrobial activity of EO and the solvent extracts of Soo were screened against 9microorganisms. EO showed the best activity against Mycobacterium smegmatis , with 79.5 µg/mL MIC value. The n -hexane, methanol, and water extracts were the most active against the Staphylococcus aureus within the range of 81.25–125.0 µg/mL (MIC). IC ₅₀ values for the lipase enzyme inhibitory activity of EO and solvent extracts ( n -hexane, methanol, and water) were determined to be 59.87 µg/mL, 64.03 µg/mL, 101.91 µg/mL, and 121.24 µg/mL, respectively.     

Building an Iron Chromophore Incorporating Prussian Blue Analogue for Photoelectrochemical Water Oxidation

The replacement of traditional ruthenium-based photosensitizers with low-cost and abundant iron analogs is a key step for the advancement of scalable and sustainable dye-sensitized water splitting cells. In this proof-of-concept study, a pyridinium ligand coordinated pentacyanoferrate(II) chromophore is used to construct a cyanide-based CoFe extended bulk framework, in which the iron photosensitizer units are connected to cobalt water oxidation catalytic sites through cyanide linkers. The iron-sensitized photoanode exhibits exceptional stability for at least 5 h at pH 7 and features its photosensitizing ability with an incident photon-to-current conversion capacity up to 500 nm with nanosecond scale excited state lifetime. Ultrafast transient absorption and computational studies reveal that iron and cobalt sites mutually support each other for charge separation via short bridging cyanide groups and for injection to the semiconductor in our proof-of-concept photoelectrochemical device. The reorganization of the excited states due to the mixing of electronic states of metal-based orbitals subsequently tailor the electron transfer cascade during the photoelectrochemical process. This breakthrough in chromophore-catalyst assemblies will spark interest in dye-sensitization with robust bulk systems for photoconversion applications.     

Determination of Folic Acid by CE in Various Cultivated Variety of Lentils

A simple extraction and determination method for folic acid (FA) in lentil samples was developed employing capillary electrophoresis. The analysis was performed in a 75 μm ID fused silica capillary using a running buffer of 10 mM sodium borate (10%, v/v, methanol, pH 9) at +18 kV and a detection wavelength at 200 nm. Methylparaben was used as the internal standard. FA signal response was linear in the range between 1.2 × 10^?5 and 4.8 × 10^?5 M. Limit of detection (inter-day) was determined at 6.12 × 10^?7 M (3.3 σs^?1). The amount of FA found in green, red and mignon lentils was found to range between 0.408 and 0.742 mg g^?1.