Lead Fractionation Analysis in Lipstick Samples by Inductively Coupled Plasma-Mass Spectrometry

A new analytical approach based on fractionation was introduced for lead in lipstick samples. Different separation techniques including n-hexane, glycerol extraction, and activated carbon adsorption were used to characterize the lipid fraction, polar and aromatic components of the samples. Additionally, artificial saliva and food stimulant extractions were used for the risk assessment studies. Trace metal levels in fractions were determined by inductively coupled plasma-mass spectrometry. Method validation parameters in the total element determinations were defined in terms of detection limits, accuracy, and precision. The limits of detection and quantification were 0.02 and 0.07 mg kg^?1 for Pb; whereas the repeatability and reproducibility of the results based on percent relative standard deviation were 3.0% and 7.2% for lead, respectively.     

Experimental and computational studies on (<Emphasis Type="Italic">Z</Emphasis>)-1-((4-phenylamino)phenylamino)-methylene)naphthalen-2(1<Emphasis Type="Italic">H</Emphasis>)-one

The Schiff base compound (Z)-1-((4-phenylamino)phenylamino)methylene)naphthalen-2(1H)-one has been synthesized and characterized by IR, UV–Vis, and X-ray single-crystal determination. Molecular geometry from X-ray experiment of the title compound in the ground state have been compared using the Hartree–Fock (HF) and density functional method (B3LYP) with 6−31G(d,p) basis set. Calculated results show that density functional theory DFT and HF can well reproduce the structure of the title compound. Using the time-dependent density functional theory (TD-DFT) and Hartree–Fock (TD-HF) methods, electronic absorption spectra of the title compound have been predicted and a good agreement with the TD-DFT method and experimental ones is determined. The energetic behavior of the title compound in solvent media has been examined using B3LYP method with the 6−31G(d,p) basis set by applying the polarizable continuum model (PCM). The total energy of the title compound decreases with increasing polarity of the solvent. In addition, DFT calculations of the title compound, molecular electrostatic potential (MEP), natural bond orbital analysis (NBO), and non-linear optical (NLO) properties were performed at B3LYP/6−31G(d,p) level of theory.     

Effect of conjugated core building block dibenzo[a,c]phenazine unit on π‐conjugated electrochromic polymers: Red‐shifted absorption

A comparative investigation was undertaken for the electrosynthesis and electrochemical properties of three different electroactive polymers having a conjugated core building block, dibenzo[a,c]phenazine. A series of monomers has been synthesized as regards to thiophene based units; thiophene, 3‐hexyl thiophene, and 3,4‐ethylenedioxythiophene. The effects of different donor substituents on the polymers' electrochemical properties were examined by cyclic voltammetry. Introducing highly electron‐donating (ethylene dioxy) group to the monomer enables solubility while also lowering the oxidation potential. The planarity of the monomer unit enhances π‐stacking and consequently lowering the E_g from 2.4 eV (PHTP) to 1.7 (PTBP). Cyclic voltammetry and spectroelectrochemical measurements revealed that 2,7‐bis(4‐hexylthiophen‐2‐yl)dibenzo[a,c]phenazine (HTP) and 2,7‐bis(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐5‐yl)dibenzo[a,c]phenazine (TBP) possessed electrochromic behavior. The colorimetry analysis revealed that while PTBP have a color change from red to blue, PHTP has yellow color at neutral state and blue color at oxidized state. Hence the presence of the phenazine derivative as the acceptor unit causes a red shift in the polymers' absorption to have a blue color. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1714–1720, 2010     

Preparation and thermal characterization of poly(2‐vinylpyridine) copolymers coordinated to Cr nanoparticles

In this study, polystyrene‐block‐poly(2‐vinylpyridine), PS‐b‐P2VP, polyisoprene‐block‐poly(2‐vinylpyridne), PI‐b‐P2VP and poly(methyl metacrylate)‐block‐poly(2‐vinylpyridine), PMMA‐b‐P2VP, coordinated to Cr metal were synthesized and characterized by Fourier transform infrared, transmission electron microscopy and direct pyrolysis mass spectrometry techniques. Both thermal degradation mechanism and thermal stability of P2VP blocks were affected by the coordination of Cr nanoparticles to nitrogen of pyridine rings. Thermal decomposition of P2VP blocks was started by loss of pyridine units leaving an unsaturated and/or crosslinked polymer backbone that degraded at relatively high temperatures. Incorporation of Cr metal did not noticeably influence thermal behavior of PS and PI blocks. However, increase in thermal stability of PMMA block was detected and associated with inhibition of the interactions between carbonyl groups of MMA chains with nitrogen atom of pyridine ring as a consequence of coordination to metal. Copyright © 2015 John Wiley & Sons, Ltd.     

Poly(HEMA-co-AA) microparticles for removal of aluminum: The reason for Alzheimer's

Aluminum is one of the most toxic metals causing a variety of neurologic diseases, especially Alzheimer's disease. It is impossible to avoid contact with aluminum because of its existence in food to medications. Therefore, removal of aluminum from the blood or wastewater is urgently important. The cost-effective and easy-to-prepare adsorbents are needed to get efficient aluminum removal. For that purpose, the poly(2-hydroxyethylmethacrylate-co-acrylic acid), poly(HEMA-co-AA), microparticles was synthesized to remove aluminum in a very short interaction time. The achievement of the desired polymeric structure was confirmed via Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM) and transmission electron microscope (TEM), etc. Additionally, particle features such as swelling ratio, size, and surface area were determined. The microparticles synthesized in this study have been determined with very good adsorption capacity even in small aluminum concentrations.     

Synthesis of new donor-acceptor polymers containing thiadiazoloquinoxaline and pyrazinoquinoxaline moieties: low-band gap, high optical contrast, and almost black colored materials

Two low band gap conjugated polymers, poly[4,9-bis(4-hexylthien-2-yl)-6,7-di(thien-2-yl)-[1,2,5]thiadiazolo[3,4-g]quinoxaline] (PHTTQ) and poly[5,10-bis(4-hexylthien-2-yl)-2,3,7,8-tetra(thien-2-yl)pyrazino[2,3-g]quinoxaline] (PHTPQ), consisting of alternating electron-rich 3-hexylthiophene and electron-deficient 6,7-di(thien-2-yl)-[1,2,5]thiadiazolo[3,4-g]quinoxaline (TTQ) and 2,3,7,8-tetra(thien-2-yl)-2,3-dihydropyrazino[2,3-g]quinoxaline (TPQ) units were synthesized electrochemically. The structures of the π-conjugated monomers were tailored using thiophene as the pendant group on the acceptor units (TTQ and TPQ). The electrochemical and optical properties of the polymers were investigated by cyclic voltammetry and UV-vis-NIR spectroscopy. The absorption spectra of PHTPQ, revealing a 1.0 eV band gap, exhibited three maxima at 352 nm, 535 nm, and 750 nm. Consequently, its absorption spectra cover the region between 400 and 800 nm, which make the polymer almost black in appearance. PHTTQ shows a λ_max value of 820 nm and a band gap of 0.8 eV which is very low among other [1,2,5]thiadiazolo[3,4-g]quinoxaline-containing donor-acceptor type polymers.     

Determination of some phthalate acid esters in artificial saliva by gas chromatography-mass spectrometry after activated carbon enrichment

The determination of six phthalate acid esters was achieved in artificial saliva using gas chromatography-mass spectrometry following activated carbon enrichment of samples. Central composite experimental design was applied to optimize method parameters, such as pH, adsorption time and amount of activated carbon. The best compromise of analytical conditions for the simultaneous determination of analytes from spiked artificial saliva were found to be: pH (3), adsorption time (30 min), activated carbon amount (1.8 g L⁻¹) and elution solvent (chloroform). These conditions were applied to study the migration of phthalate acid esters from different children's toys into saliva. A horizontal agitation method was applied to extract the analytes from plastic toys into saliva for 2 h at 37 °C. The detection limits of the method were in the range of 1.3-5.1 μg L⁻¹, while the relative standard deviation (%) values for the analysis of 100 μg L⁻¹ of the analytes were below 3.0% (n = 5). Di-2-ethylhexyl phthalate was the main analyte found in these samples.     

Baltimore PM2.5 Supersite: highly time-resolved organic compounds—sampling duration and phase distribution—implications for health effects studies

As part of the Baltimore PM2.5 Supersite study, intensive three-hourly continuous PM2.5 sampling was conducted for nearly 4 weeks in summer of 2002 and as well in winter of 2002/2003. Close to 120 individual organic compounds have been quantified separately in filter and polyurethane foam (PUF) plug pairs for 17 days for each sampling period. Here, the focus is on (1) describing briefly the new sampling system, (2) discussing filter/PUF plugs breakthrough experiments for semi-volatile compounds, (3) providing insight into phase distribution of semi-volatile organic species, and (4) discussing the impact of air pollution sampling time on human exposure with information on maximum 3- and 24-h averaged ambient concentrations of potentially adverse health effects causing organic pollutants. The newly developed sampling system consisted of five electronically controlled parallel sampling channels that are operated in a sequential mode. Semi-volatile breakthrough experiments were conducted in three separate experiments over 3, 4, and 5 h each using one filter and three PUF plugs. Valuable insight was obtained about the transfer of semi-volatile organic compounds through the sequence of PUF plugs and a cut-off could be defined for complete sampling of semi-volatile compounds on only one filter/PUF plug pair, i.e., the setup finally used during the seasonal PM2.5 sampling campaign. Accordingly, n-nonadecane (C19) with a vapor pressure (vp) of 3.25 × 10⁻⁴ Torr is collected with > 95% on the filter/PUF pair. Applied to phenanthrene, the most abundant the PAH sampled, phenanthrene (vp, 6.2 × 10⁻⁵ Torr) was collected completely in wintertime and correlates very well with three-hourly PM2.5 ambient concentrations. Valuable data on the fractional partitioning for semi-volatile organics as a function of season is provided here and can be used to differentiate the human uptake of an organic pollutant of interest via gas- and particle-phase exposure. Health effects studies often relay on PM2.5 exposure measurements taken over 24 h or longer. We found that maximum 3-h concentrations are frequently two to five times higher than that found for maximum 24-h concentrations, an important aspect when considering that short-term exposure to higher air pollution levels are more likely to overpower defense mechanisms in the human lung with subsequent adverse effects even at lower pollutant levels.