Poly(HEMA-co-AA) microparticles for removal of aluminum: The reason for Alzheimer's

Aluminum is one of the most toxic metals causing a variety of neurologic diseases, especially Alzheimer's disease. It is impossible to avoid contact with aluminum because of its existence in food to medications. Therefore, removal of aluminum from the blood or wastewater is urgently important. The cost-effective and easy-to-prepare adsorbents are needed to get efficient aluminum removal. For that purpose, the poly(2-hydroxyethylmethacrylate-co-acrylic acid), poly(HEMA-co-AA), microparticles was synthesized to remove aluminum in a very short interaction time. The achievement of the desired polymeric structure was confirmed via Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM) and transmission electron microscope (TEM), etc. Additionally, particle features such as swelling ratio, size, and surface area were determined. The microparticles synthesized in this study have been determined with very good adsorption capacity even in small aluminum concentrations.     

Synthesis of new donor-acceptor polymers containing thiadiazoloquinoxaline and pyrazinoquinoxaline moieties: low-band gap, high optical contrast, and almost black colored materials

Two low band gap conjugated polymers, poly[4,9-bis(4-hexylthien-2-yl)-6,7-di(thien-2-yl)-[1,2,5]thiadiazolo[3,4-g]quinoxaline] (PHTTQ) and poly[5,10-bis(4-hexylthien-2-yl)-2,3,7,8-tetra(thien-2-yl)pyrazino[2,3-g]quinoxaline] (PHTPQ), consisting of alternating electron-rich 3-hexylthiophene and electron-deficient 6,7-di(thien-2-yl)-[1,2,5]thiadiazolo[3,4-g]quinoxaline (TTQ) and 2,3,7,8-tetra(thien-2-yl)-2,3-dihydropyrazino[2,3-g]quinoxaline (TPQ) units were synthesized electrochemically. The structures of the π-conjugated monomers were tailored using thiophene as the pendant group on the acceptor units (TTQ and TPQ). The electrochemical and optical properties of the polymers were investigated by cyclic voltammetry and UV-vis-NIR spectroscopy. The absorption spectra of PHTPQ, revealing a 1.0 eV band gap, exhibited three maxima at 352 nm, 535 nm, and 750 nm. Consequently, its absorption spectra cover the region between 400 and 800 nm, which make the polymer almost black in appearance. PHTTQ shows a λ_max value of 820 nm and a band gap of 0.8 eV which is very low among other [1,2,5]thiadiazolo[3,4-g]quinoxaline-containing donor-acceptor type polymers.     

Temperature dependency of phase transitions in polymer-dispersed nematic liquid crystal mediums

In this work, electrical measurements were performed on a polymer-dispersed LC sample so that we could demonstrate the temperature dependent molecular behavior, determined according to the electrical response of the system. Experimental results are found to be in favorable accordance with the molecular theory in several aspects. Critical temperatures, order parameters and entropy of transition are acquired for the studied system.     

Partial purification and characterization of protease enzyme from Bacillus subtilis and Bacillus cereus

The aim of this experimental study was to isolate and partially purify protease enzyme from Bacillus cereus and Bacillus subtilis. Protease enzyme is obtained by inducing spore genesis of bacteria from Bacillus species in suitable nutrient plates. The partial purification was realized by applying, respectively, ammonium sulfate precipitation, dialysis, and DEAE-cellulose ion-exchange chromatography to the supernatant that was produced later. Optimum pH, optimum temperature, pH stability, and temperature stability were determined, as well as the effects of pH, temperature, substrate concentration, reaction time, and inhibitors and activators on enzyme activity. In addition, the molecular mass of the obtained enzyme was investigated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). The specific activity of partially purified enzyme from B. subtilis was determined to be 84 U/mg. The final enzyme preparation was eight-fold more pure than the crude homogenate. The molecular mass of the partially purified enzyme was found to be 45 kDa by using SDS-PAGE. The protease enzyme that was partially purified from B. cereus was purified 1.2-fold after ammonium sulfate precipitation. The molecular mass of the partially purified enzyme was determined to be 37 kDa by using SDS-PAGE.     

Experimental and theoretical studies on the functionalization reactions of 4-benzoyl-1,5-diphenyl-1H-pyrazole-3-carboxylic acid and acid chloride with 2,3-diaminopyridine

The 1H-pyrazole-3-carboxylic acid 2 was converted in good yield (69%) into the corresponding 1H-pyrazole-3-carboxamide 5 via reaction of the acid chloride 3 with 2,3- diaminopyridine (4). A different product, the 3H-imidazo[4,5-b] pyridine derivative 6, was formed from the reaction of 3 with 4 and base in benzene for 5 hours. The structures of the synthesized compounds were determined spectroscopically. The mechanism of the reaction between 3 and 4 was examined theoretically.     

Flow injection determination of catechol based on polypyrrole–carbon nanotube–tyrosinase biocomposite detector

A flow injection catechol biosensor based on tyrosinase entrapped in carbon nanotube modified polypyrrole biocomposite film on a glassy carbon surface has been developed. Amperometric response was measured as a function of concentration of catechol, at a fixed bias voltage of −50 mV at a flow rate of 1 mL/min. The proposed biosensor exhibited impressive analytical performance such as a linear range between 3 and 50 μM, a short response time (10 s), a detection limit of 0.671 μM and an excellent operational (with a relative standard deviation of 0.54%) and long-term stability (85% remained after 10th week). A comparison of the analytical parameters of the developed biosensor with polypyrrole/tyrosinase film electrode was performed in the study. CNT was shown to enhance the electron transfer between the electrode and enzyme and capable to carry higher bioactivity owing to its intensified surface area.     

Sterically hindered N-aryl/benzyl substituted piperidoimidazolin-2-ylidene palladium complexes and their catalytic activities

A series of N-aryl (2a,b) or benzyl (2c,d) substituted piperidoimidazolinium salts and their palladium complexes (3a-d) were prepared and characterized by ¹H, ¹³C NMR, IR spectroscopy and elemental analysis. The crystal structures of 3a and 3c have been determined by X-ray crystallography. Thermogravimetric analysis (TGA) was applied to complexes (3a–d). The palladium complexes have been employed as catalyst for Suzuki-Miyaura cross coupling. The N-aryl substituted complex 3b was a highly efficient precatalyst and successfully employed in Suzuki-Miyaura cross coupling reactions of (hetero)aryl chlorides with arylboronic acids in air. In addition, the oxidative addition step of the reaction mechanism involving chlorobenzene and the catalysts 3a, 3b, 3c and 3d were computationally investigated by the DFT-$\omega$-B97X-D method and complete agreement were obtained with the catalytic results. To measure σ-donating and π-acceptor properties of the new ligands, the rhodium carbonyl complexes were also prepared.     

Synthesis, spectroscopic and electrochemical studies on bis-[1,3-substituted (Cl, Br) phenyl-5-phenyl formazanato]nickel(II) complexes

In this study, new 1:2 Ni complexes of 1,3-substituted phenyl-5-phenylformazans were synthesized with -Cl, -Br substituents in the o-, m-, p-positions of the 1-phenyl ring and -NO(2) group in the m-position of the 3-phenyl ring. Their structures were elucidated and spectral behaviors were investigated with the use of elemental analysis, GC-Mass, (1)H NMR, (13)C NMR, FTIR, UV-vis spectra. Furthermore electrochemical properties such as number of electrons transferred (n), diffusion coefficients (D) and possible reaction mechanism of the compounds were determined with the use of cyclic voltammetry, ultramicrodisc electrode and chronoamperometry. The relation between their absorption properties and electrochemical properties was examined. A linear correlation was obtained between Hammett substituent coefficients with lambda(max) values.     

Voltammetric Determination of Favipiravir Used as an Antiviral Drug for the Treatment of Covid-19 at Pencil Graphite Electrode

This work describes the sensitive voltammetric determination of favipiravir (FAV) based on its reduction for the first time with a low-cost and disposable pencil graphite electrode (PGE). In addition, the determination of FAV was also performed based on its oxidation. Differential pulse (DP) voltammograms recorded in 0.5 M H₂SO₄ for the reduction of FAV show that peak currents increase linearly in the range of 1.0 to 600.0 μM with a limit of detection of 0.35 μM. The acceptable recovery values (98.9–106.0 %) obtained from a pharmaceutical tablet, real human urine, and artificial blood serum samples spiked with FAV confirm the high accuracy of the proposed method.