Experimental probing and modeling of key sorbent-solute interactions of norephedrine enantiomers with polysaccharide-based chiral stationary phases

The key interactions of a chiral solute, norephedrine or 2-amino-1-phenyl-1-propanol (PPA), with three commercially important polysaccharide-based chiral stationary phases, amylose Tris(3,5-dimethylphenylcarbamate) (ADMPC), amylose Tris((S)-alpha-methylbenzylcarbamate) (ASMBC) and cellulose Tris(3,5-dimethylphenylcarbamate) (CDMPC) are studied in detail using different experimental techniques and molecular simulations. The HPLC retention factors of the enantiomers of PPA in n-hexane/2-propanol (90/10, v/v) at 298 K vary significantly with these sorbents. The enantioselectivities of -PPA versus +PPA are 2.4, 1.0, and 0.8 (reversal in the elution order), respectively. The observed changes in the wavenumbers and the intensities of the amide bands of these polymers in the attenuated total reflection-infrared spectroscopy (ATR-IR) spectra upon absorption of each enantiomer are different. The IR wavenumbers, and the H-bonding interaction energies of the polymer side chains with each enantiomer (polymer-solute) in four different binding configurations are estimated and ranked using the density functional theory (the DFT/B3LYP/6-311+g(d,p) level of theory). X-ray diffraction (XRD) results show that the polymer crystallinity increases significantly upon absorption of each enantiomer. The helical pitches and the inter-rod packing for these polymers are inferred from the XRD results and incorporated into the molecular dynamics (MD) simulations. The elution orders predicted for the enantiomers of PPA using MD simulations of the polymer-PPA binary systems are consistent with the chromatography results. The enantioselectivity observed in ADMPC is hypothesized to be due to having three simultaneous interactions (two H-bond and one pi-pi) of the polymer with -PPA versus two interactions (one H-bond and one pi-pi) with +PPA.     

Thermogravimetric and wide angle X-ray diffraction analysis of thermoplastic elastomers from nylon copolymer and EPDM rubber

Nylon copolymer (PA6, 66) and ethylene propylene diene (EPDM) blends with and without compatibilizer were prepared by melt mixing using Brabender Plasticorder. The thermal stability of nylon copolymer (PA6, 66)/ethylene propylene diene rubber (EPDM) blends was studied using thermogravimetric analysis (TGA). The morphology of the blends was investigated using scanning electron microscopy (SEM). In this work, the effects of blend ratio and compatibilisation on thermal stability and crystallinity were investigated. The incorporation of EPDM rubber was found to improve the thermal stability of nylon copolymer. The kinetic parameters of the degradation process were also studied. A good correlation was observed between the thermal properties and phase morphology of the blends. By applying Coats and Redfern method, the activation energies of various blends were derived from the Thermogravimetric curves. The compatibilization of the blends using EPM-g-MA has increased the degradation temperature and decreased the weight loss. EPM-g-MA is an effective compatibilizer as it increases the decomposition temperature and thermal stability of the blends. Crystallinity of various systems has been studied using wide angle X-ray scattering (WAXS). The addition of EPDM decreases the crystallinity of the blend systems.     

Expression and Production of Human Interleukin-7 in Insect Cells Using Baculovirus Expression Vector System (BEVS)

Interleukin-7 (IL-7) is a glycoprotein cytokine with significant clinical and biomedical potential, such as cancer therapy and HIV infections. Earlier it has been cloned and expressed in various protein expression systems; however, they are not efficient for large-scale production. To address this inadequacy, we report in this paper the production of recombinant human interleukin-7 (hIL-7) in insect cells. A recombinant bacmid containing hIL-7 was constructed, purified, and characterized. It was used to infect Trichoplusia ni (BT1-TN-5B1/High Five™) insect cells. Result shows that T. ni cells successfully produce hIL-7 in shake flask cultures. A scale up to 2.5-L laboratory batch bioreactor showed the efficacy of this system for large-scale production. Our results offer a highly efficient, inexpensive, and convenient system for the large-scale expression and production of recombinant hIL-7.     

β-Sheet Core of Tau Paired Helical Filaments Revealed by Solid-State NMR

One of the hallmarks of Alzheimer's disease is the self-assembly of the microtubule-associated protein tau into fibers termed "paired helical filaments" (PHFs). However, the structural basis of PHF assembly at atomic detail is largely unknown. Here, we applied solid-state nuclear magnetic resonance (ssNMR) spectroscopy to investigate in vitro assembled PHFs from a truncated three-repeat tau isoform (K19) that represents the core of PHFs. We found that the rigid core of the fibrils is formed by amino acids V306 to S324, only 18 out of 99 residues, and comprises three β-strands connected by two short kinks. The first β-strand is formed by the well-studied hexapeptide motif VQIVYK that is known to self-aggregate in a steric zipper arrangement. Results on mixed [(15)N:(13)C]-labeled K19 fibrils show that β-strands are stacked in a parallel, in-register manner. Disulfide bridges formed between C322 residues of different molecules lead to a disturbance of the β-sheet structure, and polymorphism in ssNMR spectra is observed. In particular, residues K321-S324 exhibit two sets of resonances. Experiments on K19 C322A PHFs further confirm the influence of disulfide bond formation on the core structure. Our structural data are supported by H/D exchange NMR measurements on K19 as well as a truncated four-repeat isoform of tau (K18). Site-directed mutagenesis studies show that single-point mutations within the three different β-strands result in a significant loss of PHF aggregation efficiency, highlighting the importance of the β-structure-rich regions for tau aggregation.     

Ordered networks of ZnO-nanowire hierarchical urchin-like structures for improved dye-sensitized solar cells

Quasi-1D ZnO nanowires (NWs) ordered as patterned 3D hollow hierarchical urchin-like structures have been prepared on transparent conducting substrates by electrodeposition. The ZnO NWs have been grown on self-assembled ordered polystyrene microspheres with electrical charge densities ranging from 5 to 30 C cm(-2) and organized arrays of mono and multi-urchin layers have been built. These layers have been sensitized by the highly absorbing D149 indoline organic dye. The optical characterizations and dye titrations have shown a significant increase in the light scattering and absorption as well as dye loading for the organized structures compared to randomly vertically aligned ZnO NWs grown under the same conditions. The dye-sensitized solar cells (DSSC) prepared using the sensitized layers have been characterized by current-voltage (J-V) measurements, IPCE and by electrochemical impedance spectroscopy. We show that the best performances are obtained for the 3D urchin monolayer structures. The conversion efficiency is increased by up to 4 times compared to their counterparts made of randomly dispersed vertical ZnO NWs. Impedance spectroscopy results show a very fast charge transfer in the ZnO NWs and urchin monolayers and that the electron lifetime is in the 4-14 ms range.     

The Role of Pd2+/Pd0 in Hydrogenation by [Pd(2‐pymo)2]n: An X‐ray Absorption and IR Spectroscopic Study

The metal–organic framework (MOF) [Pd(2‐pymo)₂]_n (2‐pymo=2‐pyrimidinolate) was used as catalyst in the hydrogenation of 1‐octene. During catalytic hydrogenation, the changes at the metal nodes and linkers of the MOF were investigated by in situ X‐ray absorption spectroscopy (XAS) and IR spectroscopy. With the help of extended X‐ray absorption fine structure and X‐ray absorption near edge structure data, Quick‐XAS, and IR spectroscopy, detailed insights into the catalytic relevance of Pd²⁺/Pd⁰ in the hydrogenation of 1‐octene could be achieved. Shortly after exposure of the catalyst to H₂ and simultaneously with the hydrogenation of 1‐octene, the aromatic rings of the linker molecules are hydrogenated rapidly. Up to this point, the MOF structure remained intact. After completion of linker hydrogenation, the linkers were also protonated. When half of the linker molecules were protonated, the onset of reduction of the Pd²⁺ centers to Pd⁰ was observed and the hydrogenation activity decreased, followed by fast reduction of the palladium centers and collapse of the MOF structure. Major fractions of Pd⁰ are only observed when the hydrogenation of 1‐octene is almost finished. Consequently, the Pd²⁺ nodes of the MOF [Pd(2‐pymo)₂]_n are identified as active centers in the hydrogenation of 1‐octene.     

Facile method for the preparation of water dispersible graphene using sulfonated poly(ether-ether-ketone) and its application as energy storage materials

A simple and effective method for the preparation of water dispersible graphene using sulfonated poly(ether-ether-ketone) (SPEEK) has been described. The SPEEK macromolecules are noncovalently adsorbed on the surface of graphene through π-π interactions. The SPEEK-modified graphene (SPG) forms an aqueous dispersion that is stable for more than six months. An analysis of the ultraviolet-visible spectra shows that the aqueous dispersion of SPG obeys Beer's law and the molar extinction coefficient has been found to be 149.03 mL mg(-1) cm(-1). Fourier transform infrared, Raman, and X-ray photoelectron spectroscopy analyses confirm successful reduction and surface modification of graphene. An atomic force microscopy (AFM) analysis reveals the formation of a single layer of functionalized graphene. Transmission electron microscopy results are also in good agreement with the AFM analysis and support the formation of single-layer graphene. SPG shows good electrochemical cyclic stability during cyclic voltammetry and charge/discharge process when used as a supercapacitor electrode. A specific capacitance of 476 F g(-1) at a current density of 6.6 A g(-1) is observed for SPG materials.     

Magnetic nanoparticles with an imprinted polymer coating for the selective extraction of uranyl ions

We have synthesized ferromagnetic nanoparticles with an imprinted polymer coating that is capable of adsorbing and extracting uranyl ions. The adsorbent was characterized using infrared spectroscopy, elemental analysis, X-ray powder diffraction analysis, and scanning electron microscopy. The effects of sample pH, sample volume, weight of the adsorbent, contact time and of other ions have been investigated in the batch extraction mode. The performance of the material was compared to that of particles coated with a non-imprinted polymer. The adsorbent containing the imprinted coating displays higher sorption capacity and better selectivity to uranyl ions. The method was successfully applied to the determination of uranyl ions in water samples.