Gravity-induced convective flow in microfluidic systems: electrochemical characterization and application to enzyme-linked immunosorbent assay tests

A way of using gravity flow to induce a linear convection within a microfluidic system is presented. It is shown and mathematically supported that tilting a 1 cm long covered microchannel is enough to generate flow rates up to 1000 nL.min(-1), which represents a linear velocity of 2.4 mm.s(-1). This paper also presents a method to monitor the microfluidic events occurring in a covered microchannel when a difference of pressure is applied to force a solution to flow in said covered microchannel, thanks to electrodes inserted in the microfluidic device. Gravity-induced flow monitored electrochemically is applied to the performance of a parallel-microchannel enzyme-linked immunosorbent assay (ELISA) of the thyroid-stimulating hormone (TSH) with electrochemical detection. A simple method for generating and monitoring fluid flows is described, which can, for instance, be used for controlling parallel assays in microsystems.     

Selection rules for helicate ligand component self-assembly: steric, pH, charge, and solvent effects

The reaction between 1,10-phenanthroline-2,9-dicarboxaldehyde, copper(I), and certain primary amines was found to give quantitatively a dicopper double-helicate product (two of which were crystallographically characterized) by imine self-assembly around Cu(I) templates. The parameters of this reaction were investigated, and important roles were found to be played by (i) the steric bulk of the amine, (ii) the charge of the amine, (iii) the solvent used, and (iv) the pH of the solution. Water was found to allow the broadest range of structures to form, and ligand-component exchange reactions (involving the substitution of an aromatic for an aliphatic amine) were demonstrated to proceed readily in this solvent.     

Determination of copper in medicinal plants used as dietary supplements by atomic absorption spectrometry with direct flame solid analysis

An alternative device for the direct solid analysis (DSA) for copper determination by flame atomic absorption spectrometry (FAAS) is proposed. Copper was directly determined in commercial medicinal plants used as dietary supplements. The determination of copper in solid samples by DSA–FAAS was made by using a conventional air–acetylene flame. Between 0.05 and 1.5 mg of each test, sample was weighed directly into a small polyethylene vial connected to the device used for solid introduction into the flame. Test samples were introduced into the flame as a dry aerosol using a T-quartz cell set between the burner and the optical path. The T-quartz cell has a slit in the superior part by which the solid aerosol passes to the flame. A transient signal, evaluated as integrated absorbance, is produced and it is totally integrated in 2 s. Background signals always presented absorbance values less than 0.1. It was found a characteristic mass of 0.8 ng Cu and absolute limit of detection of 1.2 ng (3 s), or 1.2 μg g⁻¹ if a sample mass of 1 mg was used. Optimized conditions for air flow rate, flame stoichiometry, and so on were established as well. No excessive grinding of the samples was needed and samples with particle of size less than 80 μm were used throughout. No statistical difference between the results from the proposed system and those obtained by sample digestion and determination by conventional FAAS was observed. With the proposed procedure, more than 50 test samples can be analyzed in 1 h and it can be easily adapted to conventional spectrometers for FAAS.     

Electron deficiency in tetrahedral transition-metal clusters: electronic structure and magnetic properties of [Ru4(eta6-C6H6)4(mu3-H)4](2+)

Analysis of the electronic structure of the electron-deficient cluster cation [Ru4(eta6-C6H6)4H4](2+) (1(2+)) by density functional theory calculations shows a very small energy gap (0.06 eV) between the diamagnetic singlet state and the paramagnetic triplet state, as a consequence of the absence of a significant Jahn-Teller distortion in the molecular structure of 1(2+). Magnetic measurements of [1]Cl2, [1][BF4]2, and [1][PF6]2 show 1(2+) to be diamagnetic in the fundamental state, with some weak temperature-independent paramagnetism, depending upon the nature of the counterion.     

Identification of the main by-products of the developing agent N-hydroxyethyl-N-ethyl-3-methyl-p-phenylenediamine in photographic effluents by liquid chromatography/mass spectrometry

N-Hydroxyethyl-N-ethyl-3-methyl-p-phenylenediamine (CD(4)) is commonly used as a developing agent in color photographic processes. The main by-products formed in developer baths used in the process were separated and identified by liquid chromatography/electron ionization mass spectrometry (LC/EI-MS) and liquid chromatography/atmospheric pressure ionization mass spectrometry (LC/API-MS). A number of side reactions, in addition to the main reactions involved in the developing process, were found to occur. Such side reactions involved in the formation of CD(4) by-products included oxidation, hydroxylation, sulfonation and the formation of coupling products. A reaction pathway for the degradation of CD(4) based on the nature of the by-products identified is proposed and discussed.     

Study of the catalytic behavior of montmorillonite/iron(III) and Mn(III) cationic porphyrins

Two samples of montmorillonite (one of Brazilian origin, BNC1 clay, and the other STX-1, supplied by the Clay Mineral Society Repository (University of Missouri, USA) were allowed to react with biomimetic metalloporphyrins of Fe(III) and Mn(III) in cationic form. The compounds were characterized by several techniques, showing that the metalloporphyrins molecules were adsorbed at the surface of the clay platelet crystals. The catalytic activities of the intercalated complexes for the oxidation of alkane were dependent upon the concentration of the porphyrin immobilized in the clay and factors such as the metal ion species in the porphyrins, choice of solvent, and concentration of the iodosylbenzene oxidant. Good selectivity to cyclohexanol instead of cyclohexanone was observed for the catalytic oxidation of cyclohexane by iodosylbenzene.     

Biomimetic zinc funnel complexes based on calix[6]N3ArO ligands: an acid-base switch for guest binding

The coordination chemistry of Zn in an N(3)ArOH environment has been explored. The ligands are based on calix[6]arenes that present two imidazole arms and an amino phenol moiety at the narrow rim. Three different types of complexes have been characterized. One is dicationic with Zn(2+) coordinated to the three nitrogen atoms and to the oxygen of the phenol group of the calix[6]ligand. This complex is very sensitive to exogenous coordinating molecules and exists as a 5-coordinate species due to the endo-complexation of a guest. The second species is a monocationic complex for which the phenol group has been deprotonated. The resulting N(3)ArOZn complex can also bind a guest ligand albeit with a lower affinity than the dicationic complex. The third species is neutral. It can be obtained upon reaction with a base to yield a hydroxo complex or with an anion such as a chloride that coordinates the metal center from the outside of the calixarene cavity. The simultaneous binding of two anionic donors decreases the Zn Lewis acidity, allowing an impressive conformational reorganization of the system. One imidazole arm is released by the metal center. The other one undergoes self-inclusion into the pi-basic calixarene cavity because the low affinity of the metal center for neutral ligand does not allow the endo-coordination of an exogenous guest. Hence, the calix[6]N(3)ArOH-based Zn complexes act as an acid-base switch for guest binding. Several aspects of this system appear reminiscent of Zn-peptidases of the astacin and serralisin families.     

Forward-scattering degenerate four-wave mixing as a potential laser-based absorption detection method in liquid separation systems: Coupling to conventional-size liquid chromatography

An explorative study on the compatibility of liquid separation systems, such as (micro) liquid chromatography (LC) and capillary electrophoresis (CE), and forward-scattering degenerate four-wave mixing (F-D4WM) as a detection method is presented. F-D4WM is a laser-based technique showing some analogy with holographic spectroscopy: a signal on a theoretical dark background is observed as a result of light absorption by an analyte. Parameters considered are solvent composition focussing on acetonitrile, methanol and water; mobile phases in LC and CE), detector cell construction, and influences of laser beam powers. A specially designed detector cell has been developed to meet the Brewster condition, both at the air-quartz and the quartz-liquid boundaries. For practical reasons, the tested cell has an optical pathlength of 1 mm; reduction to 100 μm is required to apply the cell in microseparations. The F-D4WM technique has been involved for detection in a conventional-size, reversed-phase LC separation of 1- and 2-aminoanthraquinones. The detection limit obtained (for the 1 mm cell) is 2 × 10⁻⁵ absorbance units. The experiments indicate that further reduction of background deserves explicit attention.     

Diagramme de phases du systeme binaire LiNO3-NaNO3

Phase diagram of the binary system LiNO₃-NaNO₃ has been obtained by using direct and differential thermal analysis between 323 and 623 K. This system is characterized by an eutectic plateau at 467 K. The eutectic point is at 0.465 mole NaNO₃. A peritectic appears at 550 K. There is no miscibility in the solid state. These findings associated with some other thermodynamic results have been used to calculate the activities of the constituents along the liquids curve and the excess thermodynamic functions at 618 K. The constituents seem not to have a symmetrical influence on the thermodynamic quantities.

     

Some chemical transformations of the neo-clerodane diterpene teubotrin

Starting from the natural neo-clerodane diterpenoid teubotrin (1) several neo-clerodane derivatives (3-7,9-11) have been obtained. The naturally occurring diterpenoid teuscordinon (12) has also been synthesized from teubotrin (1), showing thereby how some of these transformations can be useful for the synthesis of other natural neo-clerodane diterpenes. The latter are of interest due to their activity as insect antifeedants and other important biological properties.