Multiple hydrogen bondings in a platinum complex

An unprecedented example of a platinum(II) complex with simultaneous formation of intermolecular NH···I-Pt and CH···I-Pt H-bondings (with neighboring platinum center) and an intramolecular CH···Pt hydrogen bonding in solid state is described. There are indications showing that the complex in solution probably forms a different kind of H-bonding type interaction.     

Development of a new and environment friendly hollow fiber-supported liquid phase microextraction using vesicular aggregate-based supramolecular solvent

Hollow fiber-based liquid phase microextraction (HF-LPME) using conventional solvents is limited by their relative instability and high volatility. The use of supramolecular solvents as a liquid membrane phase could overcome these inconveniences due to their negligible vapour pressure and high viscosity. In the present study, a novel and highly flexible method was developed based on supramolecular solvents constructed of vesicles of decanoic acid, which were used for the first time as a solvent in HF-LPME. This solvent is produced from the coacervation of decanoic acid aqueous vesicles by the action of tetrabutylammonium (Bu(4)N(+)). In this work, halogenated anilines as model compounds were extracted from water samples into a supramolecular solvent impregnated in the pores and also filled inside the porous polypropylene hollow fiber membrane. The extracted anilines were separated and determined by high-performance liquid chromatography. The technique requires minimal sample preparation time and toxic organic solvent consumption, and provides a significant advantage over conventional analytical methods. The important parameters influencing the extraction efficiency were studied and optimized utilizing two different optimization methods: one variable at a time and the Box-Behnken design. Under the optimum conditions, the preconcentration factors were in the range of 74 to 203. Linearity of the method was obtained in the range of 1.0-100 μg L(-1) with the correlation coefficients of determination (R(2)) ranging from 0.9901 to 0.9986. The limits of detection for the target anilines were 0.5-1.0 μg L(-1). The relative standard deviations varied from 3.9% to 6.0%. The relative recoveries of the three halogenated anilines from water samples at a spiking level of 20.0 μg L(-1) were in the range of 90.4-107.4%.     

Hydrodynamic Characteristics and Adsorption Particularity of Nanobiological Feedstock Along the Bed Height in a Novel Chromatography Column

Expanded bed adsorption (EBA) is a practical method for the separation of nanoparticulates. In order to analysis the local hydrodynamic and adsorption behavior of nanoparticle (NP)-based biological feedstock, a modified Nano Biotechnology Group EBA column with a 26-mm inner diameter was used to withdraw liquid from different axial positions of the column. Fabricated egg albumin (EA) NPs with an average size of 70?nm were employed as a model system and viral size/charge mimic to assess the relationship between hydrodynamic and adsorption performance of NPs at the different column regions. The effects of influential factors, including flow velocity and initial concentration of NPs, on NP hydrodynamic behavior and adsorption kinetics along the bed height were investigated. NP hydrodynamic studies confirmed that non-uniform behavior dominated the system and a decreasing trend of liquid mixing/dispersion with increase of bed height was observed in this column. The results demonstrated an increase in the mixing/dispersion at certain bed heights with the increase in both the velocity and feed initial concentration. Breakthrough curves were measured at various column points to determine the adsorption performance [dynamic binding capacity (DBC) and yield] in different bed positions/zones. Yield and DBC of NPs were improved along the bed height, whereas liquid velocity had the opposite effect. Increasing the initial concentration of NPs enhanced only the DBC. Separation of EA NPs under optimal conditions was 87?%, which is an excellent result for a one-pass frontal chromatography method.     

Synthesis and phase transition studies on non-symmetric liquid crystal dimers: N-(4-(n-(4-(benzothiazol-2-yl)phenoxy)alkyloxy)-benzylidene)-4-chloroanilines

A new series of non-symmetric liquid crystal dimers N-(4-(n-(4-(benzothiazol-2-yl)phenoxy)alkyloxy)benzylidene)-4-chloroaniline containing benzothiazole and benzylideneimine units connected by a flexible alkyl spacer, –(CH₂) _n –, with n ranging from 4 to 12 in even parity have been prepared. All five members of this homologous series exhibit an enantiotropic nematic phase. The compounds with greater n of 8–12 exhibit both nematic and smectic phases upon cooling. A notable feature among this series is that for the member with n?=?10, the smectic–nematic transition is also present. The nematic–isotropic transition temperatures and associated entropy changes with respect to all compounds in this series exhibit a dramatic dependence on the length of the flexible spacer. A comparison of the transitional properties of this series with those of α-(4-benzylidenechloroaniline-4′-oxy)-ω-[4-(thiophene-2-carboxyl)benzylideneaniline-4′-oxy]alkanes reveals that replacing benzothiazole moiety at one side of the flexible alkyl spacer reduces the nematic–isotropic transition temperature.     

Tensor and Torsion Products of Relative Injective Modules with Respect to a Semidualizing Module

Let R be a commutative Cohen–Macaulay ring, and let C be a semidualizing module of R. In this paper, we show that C is generically dualizing if and only if the tensor products of injective and C-injective R-modules are injective. This leads to a characterization of dualizing modules as well as generalizes a result of Enochs and Jenda.     

A paradigmatic change: linking fullerenes to electron acceptors

The potential of Lu(3)N@C(80) and its analogues as electron acceptors in the areas of photovoltaics and artificial photosynthesis is tremendous. To this date, their electron-donating properties have never been explored, despite the facile oxidations that they reveal when compared to those of C(60). Herein, we report on the synthesis and physicochemical studies of a covalently linked Lu(3)N@C(80)-perylenebisimide (PDI) conjugate, in which PDI acts as the light harvester and the electron acceptor. Most important is the unambiguous evidence--in terms of spectroscopy and kinetics--that corroborates a photoinduced electron transfer evolving from the ground state of Lu(3)N@C(80) to the singlet excited state of PDI. In stark contrast, the photoreactivity of a C(60)-PDI conjugate is exclusively governed by a cascade of energy-transfer processes. Also, the electron-donating property of the Lu(3)N@C(80) moiety was confirmed through constructing and testing a bilayer heterojunction solar cell device with a PDI and Lu(3)N@C(80) derivative as electron acceptor and electron donor, respectively. In particular, a positive photovoltage of 0.46 V and a negative short circuit current density of 0.38 mA are observed with PDI/Ca as anode and ITO/Lu(3)N@C(80) as cathode. Although the devices were not optimized, the sign of the V(OC) and the flow direction of J(SC) clearly underline the unique oxidative role of Lu(3)N@C(80) within electron donor-acceptor conjugates toward the construction of novel optoelectronic devices.     

Polyaniline-coated Fe(3) O(4) nanoparticles: An anion exchange magnetic sorbent for solid-phase extraction

In this study, the capability of the prepared polyaniline-coated Fe(3) O(4) nanoparticles for magnetic solid-phase extraction of three parabens from environmental wastewater, cream, and toothpaste samples is presented. Synthesized Fe(3) O(4) nanoparticles were coated with sulfate-doped polyaniline via polymerization of aniline in the presence of Fe(3) O(4) nanoparticles and sulfuric acid. Here, polyaniline-coated Fe(3) O(4) nanoparticles are presented as anion exchange sorbent, which extract anionic form of parabens via anion exchange with dopant of polyaniline. The experimental conditions affecting extraction efficiency were further studied and optimized. The experimental results showed that maximum extraction efficiency can be obtained at 70 mL sample solution of pH 8, extraction and desorption times of 2 and 1 min, respectively, 100 μL of 3% (v/v) acetic acid in acetonitrile as eluent, and 100 mg of the adsorbent. Under these conditions, the linear dynamic ranges were 0.5-100 μg/L with good correlation coefficients (0.998-0.999). The detection limits were in the range of 0.3-0.4 μg/L and the relative standard deviations were less than 2.4 (n = 5) for the three parabens. Finally, this fast and efficient method was further employed for determination of target analytes in cream, toothpaste, and environmental wastewater samples and satisfactory results were obtained.     

Deep eutectic solvent promoted highly efficient synthesis of N,N’-diarylamidines and formamides

A deep eutectic solvent was used as a dual catalyst and reaction medium for the efficient N-formylation of aromatic amines without hazardous organic solvent and catalyst. Treatment of aromatic amines with trimethyl orthoformate and formic acid in deep eutectic solvent at 70 °C gives the corresponding N-formyl derivatives in good to excellent yields. This simple ammonium deep eutectic solvent, easily synthesized from choline chloride and SnCl₂, with 100% atom economy and making it applicable to industry and laboratory. Furthermore, heating the trimethyl orthoformate and aromatic primary amines in the deep eutectic solvent results in formation of the corresponding N,N’-diarylamidines in high yields.     

Dynamic 1H NMR investigation along with a theoretical study around the C–C and C = C bonds in a particular phosphorus ylide

In the present work, the dynamic ¹H NMR effects were investigated at variable temperatures within a particular phosphorus ylide involving a 2‐benzoxazolinone around the carbon–carbon single bond and also partial carbon–carbon double bond in two Z‐ and E‐rotational isomers. Activation and kinetic parameters including ΔH^≠, ΔG^≠, ΔS^≠ and E_a were determined in accord with the dynamic ¹H NMR data for three rotational processes. In addition, theoretical studies based upon rotation around the same bonds were investigated using ab initio and DFT methods at the HF/6‐31G(d,p) and B3LYP/6‐31G(d,p) levels of theory. Theoretical activation and kinetic parameters including ΔH^≠, ΔG^≠, ΔS^≠ and E_a were calculated at 298 K and experimental temperatures for five rotational processes. These results (experimental and theoretical), taken together, indicate that the rotational energy barrier around the C = C double bond was considerably high and the observation of the two rotational isomers was impossible (seen as a single isomer) at the high temperatures, in this case rotation around the C = C bond was too fast on the NMR time scale. When the temperature was relatively low, the rate of rotation was sufficiently slow; therefore, observation of the two Z‐ and E‐isomers was possible. In addition, calculations at the HF/6‐31G(d,p) level of theory showed very favorable results in agreement with the experimental data on rotation around the C = C bond. While, B3LYP level using the 6‐31G(d,p) basis set was provided the reasonable data for the restricted rotations around the C–C and C–N single bond. Copyright © 2012 John Wiley & Sons, Ltd.