The effect of electron irradiation on the optical properties of the natural armenian zeolite-clinoptilolite

Infrared (IR) absorption and luminescence in chemically and radiation-modified natural Armenian Zeolite (clinoptilolite) samples have been studied. The luminescence was studied in 390–450 nm and 620–710 nm wavelength bands, and the IR measurements were carried out in the 400–5400 cm⁻¹ range. It is shown that the luminescence intensity depends on the content of pure clinoptilolite in the samples and, probably on the distribution of “passive” luminescence centers over Si and Al sites that became “active” under radiation or chemical treatment. The samples of electron irradiated clinoptilolite have higher luminescence intensity than the chemically and thermally treated ones. A decrease in the intensity of IR absorption bands at 3550 cm⁻¹ and 3650 cm⁻¹ was found after irradiation.     

ZiCo: a peptide designed to switch folded state upon binding zinc

We describe a novel approach to the design of a metal-triggered conformational switch. Specifically, two distinct protein-folding motifs were merged into one polypeptide sequence. The target structures were an alpha-helical coiled-coil trimer and zinc-bound monomer. Solution-phase spectroscopic, sedimentation, and binding studies confirmed the key aspects of the design. Both forms of the peptide were cooperatively folded, and the switch between them was reversible. This design process potentially presents a novel route to peptide-based biosensors.     

Characterization of Al(III) complexes with hematein in artistic alum logwood inks

The complexes between Al(III) and hematein, the main coloring matter in alum logwood inks, were characterized by Raman and ²⁷Al NMR (nuclear magnetic resonance) spectroscopies. Raman spectra of the crystallized complexes and of the compounds applied on a paper substrate are presented and assigned based on published data for the parent compounds. These Raman spectra show that the coordination of the hematein to the Al(III) ions takes place in both cases through the carbonyl and hydroxyl groups in the molecule, and that the aromatic rings are also involved in the interaction. The Raman spectra of the pure hematein–Al(III) complexes were found to be consistent with those recorded for a logwood ink prepared following a late 19th century recipe, using logwood chips instead of pure hematein, and applied on a paper substrate. These spectra can be used as references for the noninvasive identification of the compounds in works of art. ²⁷Al solid‐state NMR showed that the coordination of the Al(III) atoms in the crystallized powder is predominantly octahedral, while when applied on a paper substrate the colorant is present mainly as a tetrahedral complex, with an octahedral coordination also present in a smaller proportion. The fact that the predominant coordinations for the complexes in the crystallized material and for the ones present on the paper substrate are different is relevant for the study of the lightfastness and thermal stability of works of art bearing these media. Copyright © 2009 John Wiley & Sons, Ltd.     

Raman spectroscopic characterization of a thiophene‐based active material for resistive organic nonvolatile memories

A combined theoretical and experimental Raman study is presented on a diphenyl bithiophene molecule known as a good candidate for the development of organic nonvolatile memory devices. Spectroscopic markers suitable to distinguish the different stable conformers of the molecule have been predicted and detected. The combined analysis of theoretical and experimental Raman spectra recorded in solution indicates that at room temperature a dynamical equilibrium, characterized by interconversion between the two more stable conformers (namely trans and cis), takes place and that the more populated species is the cis form. Referring to the solid phase instead, Raman spectra of single‐crystal samples show the presence of the only trans conformer, as confirmed by X‐ray measurements. Finally, Raman spectra of thin films, as those used for the memory device, were collected; samples just deposited from solution and after few hours from the deposition were analyzed. Following the evolution of selective spectroscopic Raman markers, an isomerization process from the abundant cis (as‐deposited) to the totally trans (after few hours) conformer in the solid phase was detected. These results open the way to the identification of the molecular isomers present in the thin film of the memory cell and finally of the active molecular species involved in the switching mechanism of the operating device. Copyright © 2009 John Wiley & Sons, Ltd.     

Electronic properties of the surface of perylene tetracarboxylic acid dianhydride film upon deposition of the ultrathin conjugated layers of Pyronine B

Ultrathin conjugated layers of Pyronine B were thermally deposited in UHV on the surface of perylene tetracarboxylic acid dianhydride (PTCDA) film. The structure of unoccupied electron states located 5-20 eV above the Fermi level (E_F) and the surface potential were monitored during the Pyronine B overlayer deposition, using an incident beam of low-energy electrons according to the total current electron spectroscopy (TCS) method. Electronic work function of the PTCDA surface changed from 4.9 ± 0.1 eV, during the Pyronine B deposition due to the change of the contents of the surface layer, until it reached a stable value 4.6 ± 0.1 eV at the Pyronine B film thickness 8-10 nm. The interface dipole corresponds to electron transfer from the Pyronine B overlayer to the PTCDA surface and the polarization in the Pyronine B overlayer was found confined within approximately 1 nm near the interfaces. The edges of major bands of density of unoccupied electronic states (DOUS) of PTCDA substrate and of the Pyronine B overlayer were unaffected by the process of the interface formation. The major TCS spectral features of the Pyronine B film corresponding to the DOUS band edges were identified and the assignment of the π^*, σ^*(C-C) and σ^*(CC) character was suggested.     

Distinct effect of xenobiotics on the metal‐binding properties of protein molecules

The X‐ray standing‐wave method was applied to study the elemental composition and molecular organization of ordered protein films of alkaline phosphatase exposed to different xenobiotics (drug compounds, lead). Binding of metal ions from triply distilled water to protein molecules has been experimentally observed. Definite differences in the arrangement of impurity metal ions in the films have been established. The considerable enhancement of protein–metal interactions is attributed to partial rearrangement of the protein native structure, induced by xenobiotics.     

X-ray and UV photoelectron spectroscopy of Ag nanoclusters

The main purpose of the present work is to analyze a series of Ag nanoparticles (NPs) with different size or ligand functionalization by using X-ray photoelectron spectroscopy (XPS) and to identify the differences in the band-shape and energy peak position of photoemission spectra due to the particle dimension. A transmission electron microscopy characterization was performed, to verify the consistency of the results. Three types of samples were prepared starting from AgNO₃ water solution and adding different capping agents. In the first two cases, the formation of NPs was promoted by the reduction of silver ions Ag⁺¹ to metallic Ag⁰ through the addition of sodium borohydride, whereas in the last case, it was triggered by the exposure to UV light. Depending on the size of the NPs, a different physical behavior can be recognized. NPs with diameter of about 5 nm are characterized by the phenomenon of localized surface plasmon resonance (LSPR). The other type of samples having a diameter of about 1.5 nm presents discrete energy levels instead of electronic bands, and in this case, a typical fluorescence phenomenon can be observed. In the latter case, we can refer to such systems as nanoclusters. The XPS analyses were focused on the Ag 3D spectra looking for the possible shifts of the Ag doublet as a function of the particles size. The ultraviolet photoelectron spectroscopy with He II source was used for the investigation of possible changes in the valence band.     

Surface and structural analysis of epitaxial La1−xSrx (Mn1−yCoy)zO3 films

In the present study were studied the ferromagnetic La_1−xSr_x (Mn_1−yCo_y)_zO₃ (LSMCO) films with Co content y = 0 to 0.18, grown on LaAlO₃ substrates by advantageous pulsed-injection metalorganic chemical vapor deposition technique. The LSMCO films exhibit negative colossal magnetoresistance effect; therefore, they are interesting as potential material for the applications in magnetic field sensing. The changes of lattice volume in the investigated LSMCO films were monitored by X-ray diffraction measurements revealing a transition from tensile to compressive strain with increase of Co content. Additionally, from the atomic force microscopy images, the surface smoothening with increase of y was determined. Despite the reduction of the out-of-plane lattice parameter of LSMCO, the increase of lattice volume in the whole Co-doping range was observed. The X-ray photoelectron spectroscopy combined with Ar⁺ ion sputtering was used for the investigation of chemical composition of the LSMCO films and demonstrated the change and redistribution of oxidation states of Mn and Co on the surface and in the volume of the films. Regardless of the structural changes and charge distribution of Co and Mn cations, epitaxial LSMCO exhibits ferromagnetic properties and magnetoresistance values increases with augmenting Co content in the range of y = 0 to 0.18.     

Crystal and molecular structures of Si-(iodomethyl)silatranes with methyl substituents in β-position relative to the nitrogen atom

1. Download high-res image (147KB)
2. Download full-size image