Stabilization of foams with inorganic colloidal particles

Wet foams are used in many important technologies either as end or intermediate products. However, the thermodynamic instability of wet foams leads to undesired bubble coarsening over time. Foam stability can be drastically improved by using particles instead of surfactants as foam stabilizers, since particles tend to adsorb irreversibly at the air-water interface. Recently, we presented a novel method for the preparation of high-volume particle-stabilized foams which show neither bubble growth nor drainage over more than 4 days. The method is based on the in-situ hydrophobization of initially hydrophilic particles to enable their adsorption on the surface of air bubbles. In-situ hydrophobization is accomplished through the adsorption of short-chain amphiphiles on the particle surface. In this work, we illustrate how this novel method can be applied to particles with various surface chemistries. For that purpose, the functional group of the amphiphilic molecule was tailored according to the surface chemistry of the particles to be used as foam stabilizers. Short-chain carboxylic acids, alkyl gallates, and alkylamines were shown to be appropriate amphiphiles to in-situ hydrophobize the surface of different inorganic particles. Ultrastable wet foams of various chemical compositions were prepared using these amphiphiles. The simplicity and versatility of this approach is expected to aid the formulation of stable wet foams for a variety of applications in materials manufacturing, food, cosmetics, and oil recovery, among others.     

The CK2 alpha/CK2 beta interface of human protein kinase CK2 harbors a binding pocket for small molecules

The Ser/Thr kinase CK2 (previously called casein kinase 2) is composed of two catalytic chains (CK2 alpha) attached to a dimer of noncatalytic subunits (CK2 beta). CK2 is involved in suppression of apoptosis, cell survival, and tumorigenesis. To investigate these activities and possibly affect them, selective CK2 inhibitors are required. An often-used CK2 inhibitor is 5,6-dichloro-1-beta-D-ribofuranosylbenzimidazole (DRB). In a complex structure with human CK2 alpha, DRB binds to the canonical ATP cleft, but additionally it occupies an allosteric site that can be alternatively filled by glycerol. Inhibition kinetic studies corroborate the dual binding mode of the inhibitor. Structural comparisons reveal a surprising conformational plasticity of human CK2 alpha around both DRB binding sites. After local rearrangement, the allosteric site serves as a CK2 beta interface. This opens the potential to construct molecules interfering with the CK2 alpha/CK2 beta interaction.     

CrCl2-promoted stereospecific and stereoselective alkyl- and silylcyclopropanation of alpha,beta-unsaturated amides

An efficient chromium-promoted alkyl- or silylcyclopropanation of alpha,beta-unsaturated amides is described. These reactions can be carried out on (E)- or (Z)-alpha,beta-enamides in which the C-C double bond is di-, or trisubstituted. This process takes place with total stereospecificity and the new stereogenic center is generated with high or total stereoselectivity. Some synthetic applications of the obtained silylcyclopropyl amides are also reported. Two mechanisms based on the generation of carbenoid or carbene complexes have been proposed to explain this cyclopropanation reaction.     

Microwave-assisted three-component synthesis of 7-aryl-2-alkylthio-4,7-dihydro-1,2,4-triazolo[1,5-a]-pyrimidine-6-carboxamides and their selective reduction

Multicomponent reactions (MCRs) and microwave-assisted organic synthesis (MAOS) have been used as key methods for the synthesis of fused dihydropyrimidine derivatives. The three-component condensation of 3-amino-5-alkylthio-1,2,4-triazoles with aromatic aldehydes and acetoacetamides under microwave irradiation was developed as a rapid and efficient solution-phase method for the high-yielding preparation of 7-aryl-2-alkylthio-4,7-dihydro-1,2,4-triazolo[1,5-a]pyrimidine-6-carboxamide libraries. In addition, the selective reduction of the formed dihydrotriazolopyrimidines to trans-trans-2-alkylthio-7-aryl-4,5,6,7-tetrahydro-1,2,4-triazolo[1,5-a]pyrimidine-6-carboxamides was established. The described synthetic protocols provide rapid access to novel and diversely substituted dihydroazolopyrimidine libraries.     

Heat capacity of methacetin in a temperature range of 6 to 300 K

Heat capacity of methacetin (N-(4-methoxyphenyl)-acetamide) has been measured in the temperature range 5.8–300 K. No anomalies in the C _p(T) dependence were observed. Thermodynamic functions were calculated. At 298.15 K, the values of entropy and enthalpy are equal to 243.1 J K⁻¹ mol⁻¹ and 36360 J mol⁻¹, respectively. The heat capacity of methacetin in the temperature range 6–10 K is well fitted by Debye equation C _p = AT ³. The thermodynamic data obtained for methacetin are compared with those for the monoclinic and orthorhombic polymorphs of paracetamol.     

Excited-state absorption properties of platinum(II) terpyridyl acetylides

A comprehensive photophysical study is presented which compares the ground- and excited-state properties of four platinum(II) terpyridyl acetylide compounds of the general formula [Pt(tBu3tpy)(CCR)]+, where tBu3tpy is 4,4',4' '-tri-tert-butyl-2,2':6',2' '-terpyridine and R is an alkyl or aryl group. [Ru(tBu3tpy)3]2+ and the pivotal synthetic precursor [Pt(tBu3tpy)Cl]+ were also investigated in the current work. The latter two complexes possess short excited-state lifetimes and were investigated using ultrafast spectrometry while the other four compounds were evaluated using conventional nanosecond transient-absorption spectroscopy. The original intention of this study was to comprehend the nature of the impressive excited-state absorptions that emanate from this class of transition-metal chromophores. Transient-absorbance-difference spectra across the series contain the same salient features, which are modulated only slightly in wavelength and markedly in intensity as a function of the appended acetylide ligand. More intense absorption transients are observed in the arylacetylide structures relative to those bearing an alkylacetylide, consistent with transitions coupled to the pi system of the ancillary ligand. Reductive spectroelectrochemical measurements successfully generated the electronic spectrum of the tBu3tpy radical anion in all six complexes at room temperature. These measurements confirm that electronic absorptions associated with the tBu3tpy radical anion simply do not account for the intense optical transitions observed in the excited state of the Pt(II) chromophores. Transient-trapping experiments using the spectroscopically silent reductive quencher DABCO clearly demonstrate the loss of most transient-absorption features in the acetylide complexes throughout the UV, visible, and near-IR regions following bimolecular excited-state electron transfer, suggesting that these features are strongly tied to the photogenerated hole which is delocalized across the Pt center and the ancillary acetylide ligand.     

σ‐Alkylpalladium Intermediates in Intramolecular Heck Reactions:Isolation and Catalytic Activity

The isolation of σ‐alkylpalladium Heck intermediates, possible when β‐hydride elimination is inhibited, is a rather rare event. Performing intramolecular Heck reactions on N‐allyl‐2‐halobenzylamines in the presence of [Pd(PPh₃)₄], we isolated and characterized a series of stable bridged palladacycles containing an iodine or bromine atom on the palladium atom. Indolyl substrates were also tested for isolation of the corresponding complexes. X‐ray crystallographic analysis of one of the indolyl derivatives revealed the presence of a five‐membered palladacycle with the metal center bearing a PPh₃ ligand and an iodine atom in a cis position with respect to the nitrogen atom. The stability of the σ‐alkylpalladium complexes is probably a consequence of the strong constraint resulting from the bridged junction that hampers the cisoid conformation essential for β‐hydride elimination. Subsequently, the thus obtained bridged five‐membered palladacycles were proven to be effective precatalysts in Heck reactions as well as in cross‐coupling processes such as Suzuki and Stille reactions.     

Synthesis and temperature dependence of physical properties of four pyridinium-based ionic liquids: Influence of the size of the cation

In this paper, the ionic liquids 1,2-diethylpyridinium ethylsulfate, EEpyESO₄; 1-methylpyridinium methylsulfate, MpyMSO₄; 1,3-dimethylpyridinium methylsulfate, MMpyMSO₄; and 2-ethyl-1-methylpyridinium methylsulfate, EMpyMSO₄; were synthesized in our laboratory, and their experimental densities, speeds of sound, dynamic viscosities, and refractive indices were studied as a function of temperature at atmospheric pressure. Thermal expansion coefficient, molar volume, and molar refraction of these ionic liquids were calculated from the experimental density and refractive index values.     

A crystalline sponge based on dispersive forces suitable for X-ray structure determination of included molecular guests

A crystalline porous material showing one-dimensional (1-D) rectangular micropores (12 × 9 Ų) has been assembled from a semirigid macrocyclic tetraimine and EtOAc as the templating agent. The 1-D nature of the material is intrinsic to the conformationally rigid structure of a macrocyclic sub-unit bearing four cyclohexylidene residues. The multiple dispersive forces established among the aliphatic residues glutted the 1-D channels and provided thermal stability to the material at temperatures below 160 °C. Upon removal of the template, the structure of the empty solid exhibited permanent microporosity (S _BET = 342 m² g^–1). Being a true molecular sponge, the channel framework of this material allowed the inclusion of a variety of molecular sample guests without compromising its crystalline nature. Remarkably, this crystalline material enabled the structure determination by X-ray diffraction of the included molecules. Theoretical studies demonstrated the vital role played by the dispersive forces in the overall stabilization of the crystal packing.     

The preparation,crystal structure and electrochemistry of (5Z,5′Z)-2,2′-(alkane-α,ω-diylsulfanyldiyl)bis(5-(3-pyridylmethylene)-3,5-dihydro-4H-imidazol-4-ones) and their complexes with cobalt(II) chloride

A series of S-alkylated derivatives of 2-thiohydantoins, containing two 5-(3-pyridylmethylene)-3,5-dihydro-4H-imiazole-4-one fragments joined by polymethylene bridges with different numbers of carbon atoms, was synthesized. The title (5Z,5′Z)-2,2′-(alkane-α,ω-diylsulfanyldiyl)bis(5-(3-pyridylmethylene)-3,5-dihydro-4H-imidazol-4-ones) (L) were obtained by alkylation of 5-(3-pyridylmethylene)-3-phenyl-2-thiohydantoine by 1,2-dibromoethane, 1,6-dibromohexane or 1,10-dibromodecane in DMF in the presence of potassium carbonate. The complexes of ligands L with CoCl₂ · 6H₂O have been synthesized. It is shown that, regardless of the L:CoCl₂ ratio, complexes with LCoCl₂ composition are obtained in all cases. The structure of the cobalt(II) chloride complex with (5Z,5′Z)-2,2′-(ethane-1,2-diyldisulfanyldiyl)bis(5-(3-pyridylmethylene)-3-phenyl-3,5-dihydro-4H-imidazol-4-one) was determined by means of the RSA method. The cobalt atom in this complex has a tetrahedral ligand environment and it is coordinated by two chloride anions and two nitrogen atoms of pyridine fragments, forming a 19-membered metallocycle. Electrochemical investigations of the synthesized ligands and complexes have been made by CVA and RDE methods. It is established that the first stage of reduction for the complexes takes place on the metal, whereas the first stage of oxidation takes place on the coordinated chloride-anions.