Concomitant cocrystal and salt: no interconversion in the solid state

A cocrystal and a molecular salt of β‐alanine and dl ‐tartaric acid, C₃H₈NO₂⁺·C₄H₄O₆^?, of the same chemical composition, were studied over a wide temperature range by single‐crystal and powder X‐ray diffraction. Neither the interconversion between the two phases nor any polymorphic transitions were observed in the temperature range from 100 K to the melting points. This contrasts with the solvent‐mediated phase transition from the salt to the cocrystal in a slurry that has been documented earlier.     

Experimental and Theoretical Evidence of the Existence of Gold(I)⋅⋅⋅Mercury(II) Interactions in Solution through Fluorescence‐Quenching Measurements

Heteronuclear complexes {[Hg(R)₂][Au(R′)(PMe₃)]₂}_n (R=R′=C₆Cl₂F₃ ( 3 ); R=R′=C₆F₅ ( 4 ); R=C₆Cl₂F₃, R′=C₆F₅ ( 5 ); R=C₆F₅, R′=C₆Cl₂F₃ ( 6 )) were prepared by the treatment of the corresponding organomercury compounds, [Hg(C₆X₅)₂], with two equivalents of [Au(C₆X₅)(PMe₃)]. Their crystal structures, as determined by using X‐ray diffraction methods, display Au???Hg interactions. Although only compound 4 and 5 show luminescence in the solid state, all of these compounds quench the fluorescence of naphthalene in solution. Solution studies of these derivatives suggest a cooperative effect of the gold(I) center in switching on the quenching capabilities of the [Hg(C₆X₅)₂] synthon with naphthalene. Theoretical studies confirmed the quenching ability of the organomercury species in the presence of gold.     

Transition Metal Complexes of a Salen–Fullerene Diad: Redox and Catalytically Active Nanostructures for Delivery of Metals in Nanotubes

A covalently‐linked salen–C₆₀ (H₂L) assembly binds a range of transition metal cations in close proximity to the fullerene cage to give complexes [M(L)] (M=Mn, Co, Ni, Cu, Zn, Pd), [MCl(L)] (M=Cr, Fe) and [V(O)L]. Attaching salen covalently to the C₆₀ cage only marginally slows down metal binding at the salen functionality compared to metal binding to free salen. Coordination of metal cations to salen–C₆₀ introduces to these fullerene derivatives strong absorption bands across the visible spectrum from 400 to 630 nm, the optical features of which are controlled by the nature of the transition metal. The redox properties of the metal–salen–C₆₀ complexes are determined both by the fullerene and by the nature of the transition metal, enabling the generation of a wide range of fullerene‐containing charged species, some of which possess two or more unpaired electrons. The presence of the fullerene cage enhances the affinity of these complexes for carbon nanostructures, such as single‐, double‐ and multiwalled carbon nanotubes and graphitised carbon nanofibres, without detrimental effects on the catalytic activity of the metal centre, as demonstrated in styrene oxidation catalysed by [Cu(L)]. This approach shows promise for applications of salen–C₆₀ complexes in heterogeneous catalysis.     

Dimensional Matching of Polycyclic Aromatics with Rectangular Metallacycles: Insertion Modes Determined by [C?H⋅⋅⋅π] Interactions

A family of Pd^II/Pt^II dinuclear receptors, designed to give a smooth increase in their cavity lengths (from 7.46–13.78 Å), is presented. Their inclusion complexes with a representative set of polycyclic aromatic substrates (naphthalene, carbazol, pyrene, and benzo[a]pyrene), were characterized and studied in aqueous solution and the solid state. By taking into account the dimensions of both receptors and substrates, an excellent complementarity was found between the size of the receptors and their ability to complex a given substrate. Furthermore, this dimensional matching results in specific binding modes depending on the ability of the guest to establish stabilizing [C? H???π] interactions with the host.     

Novel luminescent liquid crystalline polyazomethines. Synthesis and study of thermotropic and photoluminescent properties

Novel semiflexible polyazomethines containing chromophoric units into azomethine mesogenic core have been synthesised by condensation of a flexible dialdehyde with mesogenic diamines containing fluorene, antraquinone, pyrimidine, azobenzene and benzophenone. The thermotropic behaviour of the resulting polyazomethines was assessed by differential scanning calorimetry, polarised light microscopy and investigations of the miscibility relations. While the pure polyazomethines showed a birefringent viscous texture difficult to be ascribed, by mixing with a liquid crystal dimer, clear Schlieren or marbled textures were observed, indicating a nematic mesophase. The polymers exhibited violet, blue or yellow light emission.     

Polymer-dispersed liquid crystal composites for bio-applications: thermotropic,surface and optical properties

Polymer-dispersed liquid crystal (PDLC) systems based on polysulfone as carrying matrix and 4-cyano-4?-pentylbiphenyl (5CB) liquid crystal (LC) were obtained as thin transparent films. The PDLC films were prepared by solvent- and thermally induced phase separation methods, with various compositions in the two components. Information on the phase separation was obtained by polarised light optical microscopy, differential scanning calorimetry and scanning electron microscopy. The PDLC composites show well-defined droplets of submicrometric size, around 650 nm for a medium content of LC and around 250 nm for a low one. The droplets show a radial configuration and a homeotropic alignment of the LC molecules within. By contact angle measurement and surface free energy calculations, it was established that self-assembling of aliphatic units of the two composite components, at droplet interface, is the driving force of the homeotropic alignment. Moreover, these data indicated the potential biocompatibility of the studied composites. The photophysical behaviour shows a better light emission of the PDLCs containing bigger droplets.     

Fluoropolyethers end‐capped by polar functional groups. III. Kinetics of the reactions of hydroxy‐terminated fluoropolyethers and model fluorinated alcohols with cyclohexyl isocyanate catalyzed by organotin compounds

The kinetics of the dibutyltin dilaurate (DBTDL)‐catalyzed urethane formation reactions of cyclohexyl isocyanate (CHI) with model monofunctional fluorinated alcohols and fluoropolyether diol Z‐DOL H‐1000 of various molecular weights (100–1084 g mol^?1) in different solvents were studied. IR spectroscopy and chemical titration methods were used for measuring the rate of the total NCO disappearance at 30–60 °C. The effects of the reagents and DBTDL catalyst concentrations, the solvent and hydroxyl‐containing compound nature, and the temperature on the reaction rate and mechanism were investigated. Depending on the initial reagent concentration and solvent, the reactions could be well described by zero‐order, first‐order, second‐order, or more complex equations. The reaction mechanism, including the formation of intermediate ternary or binary complexes of reagents with the tin catalyst, could vary with the concentration and solvent and even during the reaction. The results were treated with a rate expression analogous to those used for enzymatic reactions. Under the explored conditions, the rate of the uncatalyzed reaction of fluorinated alcohols with CHI was negligible. Moreover, there was no allophanate formation, nor were there other side reactions, catalysis by urethane in the absence of DBTDL, or a synergetic effect in the presence of the tin catalyst. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3771–3795, 2002     

Theoretical study of alkyl-pi and aryl-pi interactions. Reconciling theory and experiment

Quantum mechanical and quantum mechanical/molecular mechanical calculations in conjunction with continuum solvation models have been used to analyze CH-pi interactions in model systems of aryl- and alkyl-aromatic interactions, as well as in a model folding system designed to study those interactions. High level calculations reproduced accurately the interaction of CH-pi interactions in both alkyl- and aryl-based model systems. Dispersion effects dominate the interaction, but the electrostatics term is also relevant for aryl CH-pi interactions. Theoretical calculations were also used to examine the influence of CH-pi interactions in determining the conformational flexibility of folding models. Finally, a critical comparison of the results obtained from high level calculations on model systems and the experimental data derived for folding models in apolar solvents was carried out, which allowed us to reconcile the apparent discrepancy found between both data.     

Hyperbranched polycyclocarbosiloxane

A new cross-linkable naphthalene-cyclocarbosiloxane was synthesised starting from bis[1,4-bis(methylhydrosiloxanyl)-dihydronaphthalene] via catalytic addition of the Si-H reactive groups to the unsaturated bond of triethoxyvinylsilane. Hyperbranched polycyclocarbosiloxane networks were formed by condensation of the alcoxyl groups in the presence of dibutyltin dilaurate as catalyst. The cross-linking process was studied in order to obtain information concerning the values of the reaction parameters and to determine the position of the gelation point relative to conversion.GPC analysis, IR, and 1H-NMR spectral analysis techniques were used to investigate the chemical structures of the intermediates and of the product.     

Biosensors for phenol derivatives using biochemical signal amplification

Two different approaches, both exploiting two enzymes cooperative functioning, to enhance the sensitivity of tyrosinase (PPO) based biosensor for amperometric detection of phenols have been compared. For this purpose, one monoenzyme electrode (PPO) and two bienzyme electrodes (PPO and d-glucose dehydrogenase, GDH; PPO and horseradish peroxidase, HRP) were constructed using agar-agar gel as enzyme immobilization matrix. The biosensors responses for l-tyrosine detection were recorded at −50 mV versus saturated calomel electrode (SCE). The highest sensitivity (74 mA M⁻¹) was observed for the PPO-GDH couple, while that recorded for PPO-HRP couple system was only 32 times higher than that measured for monoenzyme electrode (0.01 mA M⁻¹). The ability of the PPO-, PPO-GDH-, PPO-HRP-based biosensors to assay phenols was demonstrated by quantitative determination of phenol, 1,2-dihydroxybenzene, 1,3-dihydroxybenzene, 1,4-dihydroxybenzene, 2-amino-3 (4-hydroxyphenyl) propanoic acid, 2-hydroxytoluene, 3-hydroxytoluene, 4-hydroxytoluene, 4-clorophenol, 3-clorophenol, 2-clorophenol, 4-hydroxybenzoic acid.