ULTRASTRUCTURAL STUDIES ON THE MECHANISM OF THE PHOTODYNAMIC THERAPY OF TUMORS

Abstract Balb/c mice bearing a transplanted MS-2 fibrosarcoma were injected with 2.5 mg kg ¹ of either tetra(4-sulfonatophenyl/porphine (TPPS) in phosphate-buffered saline or 0.5 mg kg⁻¹ of Zn²⁺-phthalocyanine (Zn-Pc) incorporated into unilamellar liposomes of dipalmitoyl-phosphatidylcholine. Chromatographic studies showed that TPPS is mainly transported in the serum by globulins and albumin, while Zn-Pc is specifically bound by lipoproteins. Exposure of the injected mice to red light (300 J cm⁻²) caused extensive tumor necrosis. The ultrastructural analysis of tumor specimens taken from mice at 15 h after PDT showed that TPPS photoinduces a preferential necrosis of the neoplastic cells, while Zn-Pc causes severe photodamage to both the vascular system and the neoplastic cells. The different modes of tumor photosensitization by TPPS and Zn-Pc are discussed on the basis of the transport mechanism of the two dyes.     

Molecular Imprinting in Sol-Gel Materials: Recent Developments and Applications

Since its inception five decades ago, imprinted sol-gel materials went practically unnoticed, until in the 1970s the conceptual introduction of molecular imprinting in synthetic polymers triggered a new interest in this field. The recent growth in interest in organic–inorganic hybrid materials prepared by sol-gel chemistry and the development of a variety of new strategies for imprinting polymeric matrices have led to a growing activity in what became known as molecularly imprinted sol-gel materials. This paper intends to give an overview of recent progress in molecular imprinting in sol-gel matrices, the potential analytical applications of these tailor-made materials and their limitations, with the aim of drawing attention to useful information and to enhancing interest in this practically unexplored but promising field.     

Double cyclisation of phenylglycine-o-carboxylic acids—I: New stable mesoionic oxazolones

Remarkably stable mesoionic oxazolones possessing an oxazolo[3,2-a]quinolinium structure (5a–b),8,16, 17) were obtained by the double cyclisation of phenylglycine-o-carboxylic acids (3a–c) in refluxing acetic anhydride or in benzoic anhydride at 140°, The 0-Ac group was eliminated to give the corresponding lactones (6a–b) or replaced by O-Ts (7). IR stretching vibrations of the endo-carbonyl were in the range 1710–1768 cm^?1, while v_1-CH exhibited unusually high values (3159–3194 cm^-1). 1-Acyl derivatives could be obtained only with TFAA (23–24), although easy deuteration of the same position took place in the presence of traces of trifluoroacetic acid. Hydrolysis of 5b led to the α-quinolone-N-acetic acid 27a. In the case of 5a, hydrolysis was accompanied by self-acylation of the nucleophilic site at C-4 with formation of a dimeric acid 28a. The presence of an additional Me group in phenylalanine-o-carboxylic acid (36) activates the corresponding mesoionic oxazolone 37 so that 1-acylation becomes possible with formation of the fused oxazole 38 by the Dakin-West reaction. Temperature dependent magnetic non-equivalence of methylene protons has been observed in acids 3b-d and f and also in the 7-membered anhydride 48b.     

Calibration model of simultaneous multielement atomic-emission analysis using analytical line groups of each determined element

A calibration model of multielement methods for simultaneous determination of micro- and macro-concentrations of elements by computing the arc atomic-emission spectra has been developed. A calibration procedure for the analytical line group of the elements to be determined is offered. It allows the lower and upper limits of the concentration range for each line of the determined element to be calculated by means of the least-square method (LSM) and the Weibull distribution law is used to extend the concentration region. The calibration model was successfully tested for different arc optical emission spectroscopy (OES) methods. Received: 17 June 1997 / Revised: 3 November 1997 / Accepted: 7 November 1997     

Development and optimization of a solid composite tyrosinase biosensor for phenol detection in flow injection systems

Bulk-modified epoxy-graphite tyrosinase biosensors were fabricated by four different procedures. The influence of these fabrication procedures on the analytical performance of the enzyme electrode in an amperometric wall-jet flow cell has been studied. The bioprobe performance is assessed by cyclic voltammetry. Higher current densities and narrower peaks were obtained when the enzyme was introduced in the dry state into the epoxy-graphite material, instead of introducing it previously dissolved in the buffer. In the F1 system responses of 11.79 μA cm⁻² and 1.43 μA cm⁻² are then obtained for catechol and phenol respectively for 50 μL injections of 20 μM solutions. Moreover, if gold/palladium is introduced into the epoxy-graphite, a further increase in current is achieved resulting in 27.70μA cm⁻² and 4.90μA cm⁻²for catechol and phenol, respectively. This biosensor can operate in aqueous as well as in mixed aqueous-organic environments.     

Linked crystallites in the conducting topmost layer of polymer bilayer films controlled by temperature: from micro- to nanocrystallites.

Temperature has great impact on the structure and size of the linked crystallites of the conducting topmost layer formed at the surface of a polycarbonate film via the reaction BEDT-TTF+IBr [BEDT-TTF=bis(ethylenedithio)tetrathiafulvalene]. We show that fine temperature control permits formation of a semiconducting topmost layer of alpha'-(BEDT-TTF)(2)(I(x)Br(1-x))(3) crystallites with either micro- or nanometre size, a result that opens a route to miniaturized conducting plastic materials.     

Palladium-arene interactions in catalytic intermediates: an experimental and theoretical investigation of the soft rearrangement between eta1 and eta2 coordination modes

A series of dichloro-bridged arylbicycloheptylpalladium complexes have been synthesized and characterized by means of NMR spectroscopy. The compound [(C16H19)PdCl]2*CH2Cl2 with ortho and para methyl substituents at the arene has been characterized by means of X-ray diffraction techniques. The C(ipso) atom of the arene lies almost at the fourth planar coordination site of the metal [Pd-C(ipso) = 2.22(1) A (average)], and due to the arene's tilting, the substituted C(ortho) atom is relatively close to the metal atom [2.54(1) A (average)]. The coordinated C(ipso)-C(ortho) linkage, in a seemingly dihapto coordination, is anti with respect to the CH2 bridge of the bicycloheptyl unit. Variable-temperature NMR experiments for the para-substituted dimer 9 reveal restricted rotation of the two aryl groups about the corresponding C-C(ipso) bonds (DeltaE < or =17 kcal x mol(-1)). DFT-B3LYP calculations have been carried out on the known and similar monomer (phenylbicycloheptenyl)Pd(PPh3)I (4) and its related substituted derivatives. The essential results are as follows: (i) The potential energy surface for twisting the phenyl ring away from the symmetric eta(1) coordination in 4 is very flat (DeltaE < or = 1 kcal x mol(-1)) whereas an Atoms in Molecules analysis excludes the existence of an actual Pd-C(ortho) bond in the seemingly eta2-type conformer. (ii) Complete rotation of the unsubstituted phenyl ring is not facile but feasible. A significant strain affects the transition-state structure featuring a Pd-HC(aryl) agostic-type bond. The calculated destabilization of 10.3 kcal x mol(-1), with respect to the ground state, can be compared to the experimental barrier of the dimer 9. (iii) Various methyl-substituted derivatives of 4 have been optimized, and their structural and energetic trends are discussed. An almost ideal eta1 coordination is shown by the anti conformer of the C(ortho)-substituted complex due steric effects. For all of the other cases, a slipped eta2 coordination may be described. As a general conclusion, the unsaturated metal center receives pi electron density of the arene mainly through its C(ipso) atom. The effect may be slightly improved if the C(ortho) atom also gets closer to the metal, but in no case, does the slipped eta2 coordination seem to be crucial for the stability of the system.     

Revealing structural effects: electrochemical reactions of butanols on platinum

Spectroelectrochemical studies on the reactivity of butanol isomers on Pt electrodes in perchloric acid medium led to the observation of structural effects that result from the different arrangements of atoms in the organic molecules. The use of differential electrochemical mass spectrometry (DEMS) to detect volatile products showed that all four isomers react on the electrode, though different product yields were observed for each compound. In spite of the differences in the electrochemical behaviour of the butanol isomers, a series of general processes accounts for the results obtained. The formation of strongly adsorbed residues by a dehydration process leading to the formation of a C=C bond was proposed for all isomers. Electroreduction of the adsorbates produces C(4) and C(3) alkanes, and the latter reveal the existence of a fragmentation process. The C(4) hydrocarbons can be formed by hydrogenation of these residues and by hydrogenolysis of alcohol molecules in the bulk solution which react at the electrode with adsorbed hydrogen. On the other hand, CO(2) is formed during electrooxidation of the adsorbed species. Partial-oxidation products containing a carbonyl group were detected from 0.2 M solutions of 1-butanol, isobutyl alcohol and sec-butyl alcohol. The tertiary alcohol tert-butyl alcohol only reacts in its adsorbed state.     

Oxygen activation on metallic centers and oxidizing abilities of such oxygen

It was shown that metallcontaining peroxides such as XOOOBu-t [X = (t-BuO)₂Al, (t-BuO)₃Ti] generate molecular oxygen in the electron-excited singlet state (¹O₂). These ozonides and η²-peroxocomplex Ph₃Bi(η²O₂) demonstrate high oxidative activity towards some classes of organic substances under mild conditions (20 °C).     

Addition of secondary phosphines to N-vinylpyrroles

Secondary phosphines 1-3 react readily with N-vinylpyrroles 4 and 5 under radical initiation to give regiospecifically anti-Markovnikov adducts, diorganyl-2-(1-pyrrolyl)ethylphosphines 6a-d, highly reactive building blocks for organic synthesis, in 88-91% yields.