A volatolomic approach using cerumen as biofluid to diagnose bovine intoxication by Stryphnodendron rotundifolium

An innovative volatolomic approach employs the detection of biomarkers present in cerumen (earwax) to identify cattle intoxication by Stryphnodendron rotundifolium Mart., Fabaceae (popularly known as barbatimão). S. rotundifolium is a poisonous plant with the toxic compound undefined and widely distributed throughout the Brazilian territory. Cerumen samples from cattle of two local Brazilian breeds (‘Curraleiro Pé-Duro’ and ‘Pantaneiro’) were collected during an experimental intoxication protocol and analyzed using headspace (HS)/GC–MS followed by multivariate analysis (genetic algorithm for a partial least squares, cluster analysis, and classification and regression trees). A total of 106 volatile organic metabolites were identified in the cerumen samples of bovines. The intoxication by S. rotundifolium influenced the cerumen volatolomic profile of the bovines throughout the intoxication protocol. In this way, it was possible to detect biomarkers for cattle intoxication. Among the biomarkers, 2-octyldecanol and 9-tetradecen-1-ol were able to discriminate all samples between intoxicated and nonintoxicated bovines. The cattle intoxication diagnosis by S. rotundifolium was accomplished by applying the cerumen analysis using HS/GC–MS, in an easy, accurate, and noninvasive way. Thus, the proposed bioanalytical chromatography protocol is a useful tool in veterinary applications to determine this kind of intoxication.     

Kinetic study of template removal of Al-MCM-41 synthesized at room temperature

The Al-MCM-41 molecular sieve with Si/Al = 20 molar ratio was synthesized at room temperature and characterized by X-ray diffractometry, surface area, thermogravimetry, and infrared spectroscopy. The kinetic study was conducted by Vyazovkin and Ozawa method, in order to verify the activation energy during the Hofmann degradation between 130 and 370 °C, in which most of surfactant removal occurs. The results suggest that the activation energy for template removal is close to 80 kJ mol^?1 lower in Al-MCM-41 synthesized at room temperature, when compared to results obtained for mesopores Al-MCM-41 and MCM-41 synthesized by hydrothermal method. This lower activation energy may be understood as consequence of textural properties, such as higher pore size.     

Non-conventional oils for biodiesel production: a study of thermal and oxidative stability

Vegetable oils with variable proportions of oleic, linoleic, and linolenic acids are more susceptible to oxidative processes. In this subject, this study evaluates the physical chemical properties and oxidative stability of non-conventional oils such as andiroba, babassu, sesame, oiticica, jatropha, and grape through accelerated oxidation techniques (pressurized differential scanning calorimetry, Rancimat and PetroOxy). It was verified that babassu and andiroba oil do not showed detectable induction period presenting high oxidative stability; moreover, it was observed that the enthalpic events occurred in 1.19, >10, 0.53, 0.49, 0.49, and 0.60 h for the andiroba oil, babassu oil, sesame seeds, jatropha, oiticica oils, and grapes, respectively, stimulating the conclusion of greater stability for the babassu oil.     

Transport properties of ephedrine hydrochloride through poly(vinyl alcohol) matrices—a simple method for enantiomeric differentiation

Equilibrium and transport properties have been investigated of ephedrines, a class of sympathomimetic amines, through cryogel membranes of poly(vinyl alcohol) (PVA). The effect of the PVA (10 to 18 % (w/v)) on the release properties of (1S,2R)-(+)-ephedrine hydrochloride has been discussed on the basis of partition–diffusion and power-law models. The effect of PVA concentration on the swelling degree of PVA–ephedrine matrices have been measured, allowing the estimation of the volume fraction of polymer in the gel. Ephedrine release rate constants, computed by using a first-order kinetics approach, have been modeled by using free-volume and hydrodynamic-scaling models. Differences in the release properties of the ephedrine isomers, (1S,2R)-(+)- and (1R,2S)-(?)-ephedrine as their hydrochlorides, have also been studied at different temperatures. The release kinetic constants and the corresponding activation energies show a marked discrimination between the two ephedrine isomers. This suggests that PVA cryogel membranes possess high potential for enantiomeric differentiation.     

Determination of volatile and non-volatile nickel and vanadium compounds in crude oil using electrothermal atomic absorption spectrometry after oil fractionation into saturates, aromatics, resins and asphaltenes

In recent work, it has been shown that electrothermal atomic absorption spectrometry (ET AAS) can be used to differentiate between volatile and non-volatile nickel and vanadium compounds in crude oil. In the present work, the distribution of these two groups of compounds over different fractions of crude oil was investigated. For this purpose two crude oil samples were separated in two steps: firstly, the asphaltenes were precipitated with n-heptane, and secondly, the maltenes were loaded on a silica column and eluted with solvents of increasing polarity. The four fractions of maltenes eluted from silica column were: F1, saturated and light aromatics; F2, polyaromatics; F3, resins; and F4, polar compounds. Fractions F1 and F2 were further investigated using gas chromatography, and all fractions were characterized by CHN analysis, confirming the increase of aromatics in the fractions 2, 3, 4 and asphaltenes. For the determination of Ni and V by ET AAS, oil-in-water emulsions were prepared. The speciation analysis was carried out measuring without chemical modifier (stable compounds) and with 20 μg palladium (total Ni and V) and the volatile fraction was calculated by difference. The limits of detection were 0.02 μg g⁻¹ and 0.06 μg g⁻¹, for Ni and V, respectively, based on an emulsion of 2 g of oil in 10 mL. The volatile species of Ni and V were associated with fractions F3 and F4, while only thermally stable Ni and V was precipitated in part together with the asphaltenes.     

Analysis of Kinetic and Operational Parameters in a Structured Model for Acrylic Acid Production through Experimental Design

In biotechnological processes, a great number of factors can influence the income productivity and conversion. Normally, it is not evident which of these factors are the most important and how they interact. In this work, multivariate analysis techniques are used as experimental design coupled to a detailed deterministic model to identify the parameters with the most significant impact on the model to represent well the acrylic acid production process. It is proposed as an alternative process, having sugarcane as feedstock, to the petrochemical-based ones that have significant environmental impacts for their production. To increase the competitiveness of renewable acrylic-acid-based process, it is necessary to find out working conditions near the optimal region, which is not an easy task, as the process is multivariable and non-linear. The mapping of the dynamics of the developed process is made using techniques of factorial design together with the methodology of Plackett–Burman. It is shown that it is possible to increase the process performance by choosing optimized conditions for the reactor operation.     

Effect of microcrystalline and microfibrillated cellulose on the evolution of hydration of cement pastes by thermogravimetry

Journal of Thermal Analysis and Calorimetry - The interest in the use of cellulose fibers of increasingly smaller sizes in cementitious materials has increased in recent years. This paper brings...     

QSAR modelling and structural aspects concerning synthetic heterocycles with larvicidal activity against Aedes aegypti

Structural Chemistry - In this paper, we present a quantitative structure–activity relationships modelling for two series of heterocyclic synthetic compounds with larvicidal activity against...     

Characterization of Biocatalysts Prepared with Thermomyces lanuginosus Lipase and Different Silica Precursors,Dried using Aerogel and Xerogel Techniques

The use of lipases in industrial processes can result in products with high levels of purity and at the same time reduce pollutant generation and improve both selectivity and yields. In this work, lipase from Thermomyces lanuginosus was immobilized using two different techniques. The first involves the hydrolysis/polycondensation of a silica precursor (tetramethoxysilane (TMOS)) at neutral pH and ambient temperature, and the second one uses tetraethoxysilane (TEOS) as the silica precursor, involving the hydrolysis and polycondensation of the alkoxide in appropriate solvents. After immobilization, the enzymatic preparations were dried using the aerogel and xerogel techniques and then characterized in terms of their hydrolytic activities using a titrimetric method with olive oil and by the formation of 2-phenylethyl acetate in a transesterification reaction. The morphological properties of the materials were characterized using scanning electron microscopy, measurements of the surface area and pore size and volume, thermogravimetric analysis, and exploratory differential calorimetry. The results of the work indicate that the use of different silica precursors (TEOS or TMOS) and different drying techniques (aerogel or xerogel) can significantly affect the properties of the resulting biocatalyst. Drying with supercritical CO₂ provided higher enzymatic activities and pore sizes and was therefore preferable to drying, using the xerogel technique. Thermogravimetric analysis and differential scanning calorimetry analyses revealed differences in behavior between the two biocatalyst preparations due to the compounds present.