Preparation of Re(I)- and (99m)Tc(I)-metallocarboranes in water under weakly basic reaction conditions

A new method for the preparation of Re- and (99m)Tc-metallocarboranes in water under mild reaction conditions was developed. Three nido-carborane ligands were reacted with [Re(CO)(3)Br(3)](2)(-) in the presence of aqueous potassium fluoride to give the corresponding eta(5)-Re(CO)(3)-carborane complexes. The use of KF as a base afforded the desired Re-metallocarboranes in good yields while avoiding the formation of Re clusters, which are byproducts commonly observed when reactions are carried out in the presence of strong aqueous bases. The reaction was also performed at the tracer level producing the first (99m)Tc-carborane complex, which was isolated in 80% radiochemical yield following a simple Sep-Pak purification process. The resulting organometallic complex was stable to cysteine and histidine challenges for more than 24 h.     

Selective extraction of benzoic acid from landfill leachate by solid-phase extraction and ion-exchange chromatography

In this work a simple method was described for selective extraction of benzoic acid from landfill leachate samples. The samples were submitted to solid-phase extraction (SPE) with XAD-4 resin as the stationary phase and ion-exchange chromatography (IEC) using the ion-exchange resin Amberlyst A-27. The instrumental analysis was performed by gas chromatography with mass spectrometric detection (GC-MSD). Benzoic acid was isolated, identified and quantified. The extraction process is rapid, simple and of low cost. It was also environmental friendly, that is, it was used a minimum amounts of hazardous organic solvents and produced also minimum quantities of residues.     

Chemoselective hydrogenation catalysts: Pt on mesostructured CeO2 nanoparticles embedded within ultrathin layers of SiO2 binder

Pt on mesostructured CeO(2) nanoparticles embedded within ultrathin layers of highly structured SiO(2) binder shows highest activity reported with 80% selectivity for the chemoselective hydrogenation of crotonaldehyde. Characterization by transmission electron microscopy (TEM), CO adsorption, and X-ray photoelectron spectroscopy (XPS) show the presence of small Pt metal particles, preferentially located on CeO(2) (70%) together with the formation of Pt-CeO(2-x) sites at the interface between Pt and CeO(2) (4 nm) nanoparticles. These sites are able to polarize the carbonyl group and facilitate the selective hydrogenation of this with respect to the double bond.     

Evolutionary divergence of sedoheptulose 7-phosphate cyclases leads to several distinct cyclic products

Sedoheptulose 7-phosphate cyclases are enzymes that utilize the pentose phosphate pathway intermediate, sedoheptulose 7-phosphate, to generate cyclic precursors of many bioactive natural products, such as the antidiabetic drug acarbose, the crop protectant validamycin, and the natural sunscreens mycosporine-like amino acids. These proteins are phylogenetically related to the dehydroquinate (DHQ) synthases from the shikimate pathway and are part of the more recently recognized superfamily of sugar phosphate cyclases, which includes DHQ synthases, aminoDHQ synthases, and 2-deoxy-scyllo-inosose synthases. Through genome mining and biochemical studies, we identified yet another subset of DHQS-like proteins in the actinomycete Actinosynnema mirum and the myxobacterium Stigmatella aurantiaca DW4/3-1. These enzymes catalyze the conversion of sedoheptulose 7-phosphate to 2-epi-valiolone, which is predicted to be an alternative precursor for aminocyclitol biosynthesis. Comparative bioinformatics and biochemical analyses of these proteins with 2-epi-5-epi-valiolone synthases (EEVS) and desmethyl-4-deoxygadusol synthases (DDGS) provided further insights into their genetic diversity, conserved amino acid sequences, and plausible catalytic mechanisms. The results further highlight the uniquely diverse DHQS-like sugar phosphate cyclases, which may provide new tools for chemoenzymatic, stereospecific synthesis of various cyclic molecules.     

Membrane-assisted solvent extraction coupled to large volume injection–gas chromatography–mass spectrometry for the determination of a variety of endocrine disrupting compounds in environmental water samples

Membrane-assisted solvent extraction coupled to large volume injection in a programmable temperature vaporisation injector using gas chromatography–mass spectrometry analysis was optimised for the simultaneous determination of a variety of endocrine disrupting compounds in environmental water samples (estuarine, river and wastewater). Among the analytes studied, certain hormones, alkylphenols and bisphenol A were included. The nature of membranes, extraction solvent, extraction temperature, solvent volume, extraction time, ionic strength and methanol addition were evaluated during the optimisation of the extraction. Matrix effects during the extraction step were studied in different environmental water samples: estuarine water, river water and wastewater (influent and effluent). Strong matrix effects were observed for most of the compounds in influent and effluent samples. Different approaches were studied in order to correct or minimise matrix effects, which included the use of deuterated analogues, matrix-matched calibration, standard addition calibration, dilution of the sample and clean-up of the extract using solid-phase extraction (SPE). The use of deuterated analogues corrected satisfactorily matrix effect for estuarine and effluent samples for most of the compounds. However, in the case of influent samples, standard addition calibration and dilution of the sample were the best approaches. The SPE clean-up provided similar recoveries to those obtained after correction with the corresponding deuterated analogue but better chromatographic signal was obtained in the case of effluent samples. Method detection limits in the 5–54 ng L⁻¹ range and precision, calculated as relative standard deviation, in the 2–25% range were obtained.     

Structural characterization and dielectric properties of the solid solutions AgPb(Sb,Bi)S3

The new solid solutions AgPbSb_1 − x Bi _x S₃ were prepared by solid state reactions. The phases were characterized by powder X-ray diffractions (XRD), scanning electron microscopy, and thermal analysis. The XRD patterns of different members (x = 0.5, 0.7, 0.8, and 1.0) are consistent with pure phases crystallizing in the cubic PbS-type structure. The electrical characterization was carried out using ac impedance spectroscopy and dc methods. The temperature dependence of the dc conductivity shows typical semiconductor Arrhenius behavior. The impedance measurements were performed in the frequency range of 0.1 Hz to 10 MHz and at the temperature range of 15 °C to 350 °C. The ac conductivity conforms to Jonscher’s universal power law. The frequency dependence of the dielectric permittivity follows the normal dielectric material behavior, and the relaxation is thermally activated. The frequency and temperature dependences of the electrical data are found to follow Summerfield scaling formalism.     

A combined method of neutron activation analysis and radiometric measurements for <Superscript>234</Superscript>U and <Superscript>238</Superscript>U determination in soil samples of low uranium concentration

A method that combines the use of non-destructive neutron activation analysis and high-resolution α spectrometry has been developed for determination of the activities of ²³⁴U and ²³⁸U in geological samples of low uranium content. The ²³⁸U content is determined by k₀-based neutron activation analysis, whereas the ²³⁴U/²³⁸U relationship is measured by α spectrometry after isolation and electrodeposition of the uranium extracted from a lixiviation with 6 M HCl. The main advantage of the method is the simplicity of the chemical operations, including the fact that the steps destined to assure similar chemical state for the tracer and the uranium species present in the sample are not necessary. The method was applied to soil samples from sites of the North Peru Coast. Uranium concentration range 3–40 mg/kg and the isotopic composition correspond to natural uranium, with about 10% uncertainty.     

Decisive Influence of Phosphorus Ligands on O2 Oxidations of Alkenes in the Presence of the Iron Nitrato/Iron Nitrosyl Couple

Abstract

Fe(NO)₂XL and Fe(NO)X₂L nitrosyl iron complexes, X = Cl, I, and L = HMPA, dppe, PPh₃, activate molecular O₂ to yield nitrato complexes. The phosphorous ligand is decisive for the oxidative power of these nitrates: with HMPA or dppe, oxygen transfer occurs only to phosphines. On going from HMPA to PPh3 the single nitrato complex obtained, Fe(NO)₂X(OPPh₃)₂ selectively epoxidizes cyclohexene, and this is the first example of oxygen transfer from a nitrato ligand to an olefin.     

PHOTOSENSITIZATION OF MURINE TUMOR, VASCULATURE and SKIN BY 5-AMINOLEVULINIC ACID-INDUCED PORPHYRIN

Abstract— The effects of topical and systemic administration of 5-aminolevulinic acid (ALA) were examined in several murine tumor systems with regard to porphyrin accumulation kinetics in tumor, skin and blood, vascular and tumor cell photosensitization and tumor response after light exposure. Marked, transient increases in porphyrin levels were observed in tumor and skin after systemic and topical ALA. Rapid, transient, dose-dependent porphyrin increases were also observed in blood; these were pronounced after systemic ALA injection and mild after topical application. They were highest within 1 h after ALA injection, thereafter declining rapidly. This matched the clearing kinetics of injected exogenous protoporphyrin IX (PpIX). Initially, vascular photosensitivity changed inversely to blood porphyrin levels, increasing gradually up to 5 h post-ALA, as porphyrin was clearing from the bloodstream. This pattern was again matched by injected, exogenous PpIX. After therapeutic tumor treatment vascular disruption of the tumor bed, while observed, was incomplete, especially at the tumor base. Minimal direct tumor cell kill was found at low photodynamic therapy (PDT) doses (250 mg/kg ALA, 135 J/cm² light). Significant, but limited (<1 log) direct photodynamic tumor cell kill was obtained when the PDT dose was raised to 500 mg/kg systemic ALA, followed 3 h later by 270 J/cm², a dose that was however toxic to the animals. The further reduction of clonogenic tumor cells over 24 h following treatment was moderate and probably limited by the incomplete disruption of the vasculature. Tumor responses were highest when light treatment was carried out at the time of highest tumor porphyrin content rather than at the time of highest vascular photosensitivity. Tumor destruction did not reach the tumor base, regardless of treatment conditions.     

An electrochemical immunosensor for ochratoxin A determination in wines based on a monoclonal antibody and paramagnetic microbeads

We report a direct competitive immunosensor for the rapid determination of ochratoxin A (OTA) in wine samples. Magnetic beads (1 ± 0.5 μm diameter) covered with streptavidin were functionalized with a monoclonal antibody against OTA, and then left to incubate in a solution of tracer (ochratoxin conjugated to the enzyme peroxidase) and a range of OTA concentrations (10(-4) to 1,000 ng mL(-1)). After washing and separation steps helped with a magnetic field, a volume of the dispersion was put on screen-printed electrodes under a magnet, and after adding the substrate the p-benzoquinone generated enzymatically was detected by differential-pulse voltammetry. Wine samples (2 mL) were easily prepared simply by adjusting to pH = 7.5 with diluted NaOH and by adding polyvinylpyrrolidone for complexing polyphenols, without any other clean-up or preconcentration steps. The limit of detection for detecting OTA in wines was of 0.11 ± 0.01 ng L(-1), well below the permitted content of the mycotoxin by the European Union (<2 ng mL(-1)). Spiked wines were subjected to immunosensor calibrations to study the matrix effects. OTA concentrations measured with the immunosensor were compared with those obtained by high-performance liquid chromatography coupled to fluorescence detection (AOAC official method 2001.01). The OTA levels from two red wines of "Campo de Borja", Spain, ranged from about 0.027 to 0.033 ng mL(-1) of OTA.