Revision of the absolute configurations of bethosides B and C and their aglycone

The absolute stereochemistry of the steroidal saponins bethosides B and C was previously assigned as (22R,25R) on the basis of work that employed Horeau's method. Our studies of helosides A and B created doubt about both the original assignment and consequently our conclusion that relied upon it. The absolute configurations of bethosides B and C are revised to (22S,25R) following X-ray crystallographic analysis of their aglycone. Synthesis and full spectral characterization of both the 22R and 22S aglycones is reported to facilitate future stereochemical assignments in this series of saponins.     

Comprehensive analysis of polycyclic aromatic hydrocarbons in wastewater using stir bar sorptive extraction and gas chromatography coupled to tandem mass spectrometry

The objective of this study was the optimization and comparison of two extraction methods for the determination of polycyclic aromatic hydrocarbons (PAHs) in wastewater (WW). A distribution study of the target compounds between the aqueous phase and the suspended particulate matter (SPM) has been performed in order to establish whether the analysis of both phases is necessary. In this sense, the feasibility of stir bar sorptive extraction (SBSE) and solid-phase extraction (SPE) for the determination of 24 PAHs in WW samples has been evaluated. The results demonstrated the suitability of SBSE to perform a comprehensive analysis of liquid samples containing high amounts of SPM, such as in the determination of PAHs in WWs. A gas chromatography triple quadrupole mass spectrometry (GC-QqQ-MS/MS) method has been also optimized for the separation and detection of the target compounds, avoiding the co-elution of some groups of isomers, such as benzo[b], [j] and [k] fluoranthenes and indene[1,2,3-cd]pyrene/dibenz[a,h]anthracene. For that purpose, a specific capillary column developed for PAH determination was used. The SBSE procedure was validated and adequate parameters (such as recovery, linearity, precision, limits of detection and quantification) were obtained. Finally, the validated method was applied to the analysis of real samples collected from an experimental WW treatment plant, detecting some PAHs at concentrations in the range 0.007-0.022 μg L(-1).     

Surface reduction of freely floating smectic bubbles

Elongated freely floating smectic bubbles are observed during their relaxation to equilibrium sphere shape. Unlike soap bubbles that perform weakly damped oscillations into equilibrium, this relaxation is overdamped in smectics by internal structure reorganisation processes. The bubble area reduction of centimetre-sized freely floating bubbles with few nanometres film thickness is recorded with high-speed optical imaging in microgravity and analysed quantitatively. We find a nearly linear reduction of the film area with time, driven by capillary forces and inhibited by smectic layer reorganisations. Characteristic times are in the milliseconds range, with little correlation to the film thickness and bubble size. Instead, the homogeneity of the films and the number and sizes of islands of excess layers that spontaneously form on the films appear to have crucial influence on the dynamics. The efficiency of this process sets the time scale of the film area shrinkage. We discuss the limitations of a minimalistic model that captures smectic layer reorganisation processes.     

The preparation of monitors and comparators for k0-INAA using standard solutions

Journal of Radioanalytical and Nuclear Chemistry - The methodology adopted at the Laboratory of Analytical Techniques of Instituto Peruano de Energía Nuclear for preparation of monitors and...     

Determination of boron and hydrogen in materials for multicrystalline solar cell production with prompt gamma activation analysis

Journal of Radioanalytical and Nuclear Chemistry - For the optimization of the manufacturing process of multicrystalline silicon (mc-Si) for solar cells in order to reduce energy consumption and...     

Fluoride removal from water by chitosan derivatives and composites: A review

Fluoride is an essential element, indispensable for maintenance of dental health. Nevertheless, fluoride concentrations in drinking water above 1.5 mg L⁻¹ may be detrimental to human health. Many methods have been developed for removing excessive fluoride from drinking water, adsorption seems to be an effective, environmentally friendly and economical one. Since the sorption capacity of fluoride below 2 mg L⁻¹ on most conventional adsorbents is not satisfactory, much effort has been devoted to develop new and cost-effective fluoride adsorbents. This review reports the recent developments in the F⁻ removal in water treatment, using chitosan derivatives and composites in order to provide useful information about the different technologies. When possibly the adsorption capacity of chitosan derivatives and composites under different experimental conditions is reported to help to compare the efficacy of the fluoride removal process. A comparison with the adsorption capacity of other low cost adsorbents is also tabled.     

Determining concentration depth profiles in fluorinated networks by means of electric force microscopy

By means of electric force microscopy, composition depth profiles were measured with nanometric resolution for a series of fluorinated networks. By mapping the dielectric permittivity along a line going from the surface to the bulk, we were able to experimentally access to the fluorine concentration profile. Obtained data show composition gradient lengths ranging from 30 nm to 80 nm in the near surface area for samples containing from 0.5 to 5 wt. % F, respectively. In contrast, no gradients of concentration were detected in bulk. This method has several advantages over other techniques because it allows profiling directly on a sectional cut of the sample. By combining the obtained results with x-ray photoelectron spectroscopy measurements, we were also able to quantify F/C ratio as a function of depth with nanoscale resolution.     

Determination of β-glucosidase activity in soils with a bioanalytical sensor modified with multiwalled carbon nanotubes

Soil microorganisms and enzymes are the primary mediators of soil biological processes, including organic matter degradation, mineralization, and nutrient recycling. They play an important role in maintaining soil ecosystem quality and functional diversity. Moreover, enzyme activities can provide an indication of quantitative changes in soil organic matter. β-Glucosidase (β-Glu) activity has been found to be sensitive to soil management and has been proposed as a soil quality indicator because it provides an early indication of changes in organic matter status and its turnover. The aims of the present study were to test and use a simple and convenient procedure for the assay of β-Glu activity in agricultural soil. The method described here is based on the enzymatic degradation of cellobiose by β-Glu present in the soil sample and the subsequent determination of glucose produced by the enzymatic reaction using screen-printed carbon electrodes modified with multiwalled carbon nanotubes (SPCE-CNT) equipped with coimmobilized glucose oxidase and horseradish peroxidase enzymes. The potential applied to the SPCE-CNT detection was −0.15 V versus a Ag/AgCl pseudo-reference electrode. A linear calibration curve was obtained in the range 2.7–11.3 mM with a correlation coefficient. In the present study, an easy and effective SPCE-CNT-modified electrode allowed an improved amperometric response to be achieved and this is attributed to the increased surface area upon electrode modification.