Influence of silica gel pretreatment and bonding technique on PAH selectivity of octadecyl bonded phases

Summary The effect of silica gel pretreatment and of different bonding techniques, on the chromatographic properties of octadecyl bonded phases is described. The experiments show that a monomeric octadecyl bonded phase, prepared from silica gel that has not been treated before bonding, has a poor selectivity towards polycyclic aromatic hydrocarbons (PAHs) and shows high adsorption of basic components. Silica gel treatment before the bonding of the monofunctional silane does not give a substantial improvement. Polymeric phases on the other hand show a much better PAH selectivity and a lower adsorptivity towards basic components. Further improvement can be achieved with the polymeric modification if silica gel treatment is carried out before bonding.     

Reactions of (di)manganese carbonyl ions with 1,4,7-trimethyl-1,4,7-triazacyclononane (Me3TACN) in the gas phase

The gas-phase reactions of a series of (di)manganese carbonyl positive ions with 1,4,7-trimethyl-1,4,7-triazacyclononane (Me(3)TACN) have been examined with the aid of Fourier transform ion cyclotron resonance (FTICR) mass spectrometry. The monomanganese carbonyl ions, [Mn(CO)(n)](+) (n = 2-5), react predominantly by ligand exchange and to a minor extent by electron transfer with the formation of the radical cation of Me(3)TACN. For the [Mn(CO)(n)](+) (n = 2-4) ions, the ligand exchange results in the exclusive formation of a [Mn(Me(3)TACN)](+) complex, whereas small amounts of [Mn(CO)(Me(3)TACN)](+) ions are also generated in the reactions of the [Mn(CO)(5)](+) ion. The [Mn(2)(CO)(n)](+) ions (n = 2, 4 and 5) react also by competing electron transfer and ligand exchange. The reaction of the [Mn(2)(CO)(2)](+) and [Mn(2)(CO)(4)](+) ions is associated with cleavage of the Mn--Mn bond as evidenced by the pronounced formation of [Mn(Me(3)TACN)](+) ions. For [Mn(2)(CO)(5)](+), the ligand exchange leads mainly to the formation of [Mn(2)(CO)(n)(Me(3)TACN)](+) (n = 1-3) ions. These primary product ions react subsequently by the incorporation of a second Me(3)TACN molecule to afford [Mn(2)(CO)(Me(3)TACN)(2)](+) and [Mn(2)(CO)(2)(Me(3)TACN)(2)](+) ions. Both of these latter species incorporate an oxygen molecule with formation of ions with the assigned composition of [Mn(2)(O(2))(CO)(Me(3)TACN)(2)](+) and [Mn(2)(O(2))(CO)(2)(Me(3)TACN)(2)](+).     

High-performance liquid chromatography with on-line coupled UV, mass spectrometric and biochemical detection for identification of acetylcholinesterase inhibitors from natural products

A high-performance liquid chromatography (HPLC) method with on-line coupled ultraviolet (UV), mass spectrometry (MS) and biochemical detection for acetylcholinesterase (AChE) inhibitory activity has been developed. By combining the separation power of HPLC, the high selectivity of biochemical detection, and the ability to provide molecular mass and structural information of MS, AChE inhibitors can be rapidly identified. The biochemical detection was based on a colorimetric method using Ellman's reagent. The detection limit of galanthamine, an AChE inhibitor, in the HPLC-biochemical detection is 0.3 nmol. The three detector lines used, i.e., UV, MS and Vis for the biochemical detection were recorded simultaneously and the delay times of the peaks obtained were found to be consistent. This on-line post-column detection technique can be used for the identification of AChE inhibitors in plant extracts and other complex mixtures such as combinatorial libraries.     

Theory-enforced Re-investigation of the Origin of the Large Metal–Carbon Bond Strength in PdCH2I+ and its reactions with unsaturated hydrocarbons

State-of-the-art ab initio studies demonstrate that the reaction Pd⁺ + CH₃I → PdCH₂I⁺ + H^. is endothermic by ca. 20 kcal/mol, which translates into a bond dissociation energy (BDE) of ca. 83 kcal/mol for the Pd⁺? CH₂I bond. This figure is in agreement with an experimental bracket of 68 kcal/mol < BDE(Pd⁺? CH₂I) < 92 kcal/mol. Based on these findings, the previously studied Pd⁺/CH₃I system was re-investigated, and double-resonance experiments demonstrate that the formation of PdCH₂I⁺ occurs stepwise via PdCH as a reactive intermediate. Further, ion/molecule reactions of PdCH₂I⁺ with unsaturated hydrocarbons are studied, which reveal the formation of carbon–carbon bonds in the gas phase.     

Determination of sulphuric acid in process effluent streams using sequential injection titration

Sulphuric acid in process effluent streams from an electrorefining copper plant was analysed with a sequential injection (SI) titration system using sodium hydroxide as titrant. In the proposed SI titration system a base titrant, acid analyte and base titrant zone were injected sequentially into a distilled water carrier stream in a holding coil and swept by flow reversal through a reaction coil to the detector. The base zones contained bromothymol blue as indicator and the endpoint was monitored spectrophotometrically at 620 nm. The influence of carrier stream flow rate, acid and base zone volumes and titrant concentration on the linear range of the method was studied to obtain an optimum. A linear relationship between peak width and logarithm of the acid concentration was obtained in the range 0.006-0.178 mol l(-1) of H(2)SO(4) for a NaOH concentration of 0.002 mol l(-1). The results obtained for the SI titration of process samples were in good agreement with a standard potentiometric method with an RSD<0.75% and a sample frequency of 23 samples h(-1).     

The identification of flunitrazepam and its metabolites in urines samples

A thin-layer chromatographic method with fluorescence detection is described for the identification of flunitrazepam and its metabolites in urine. The method is based on the hydrolysis and subsequent formation of acridine derivatives by cyclization in dimethylformamide and is selective for benzodiazepines with a 2-fluorophenyl group. The method is applicable to urine samples even after an oral dose of only 2 mg of flunitrazepam. Flunitrazepam and flurazepam consumption can be distinguished.     

Tandem on-line dialysis with a double and single dialyser in flow injection dialysis — Simultaneous determination of calcium and high chloride in industrial effluents

The on-line double membrane dialyser described previously was coupled in series to a single dialyser in the manifold of a flow injection system to include the determination of samples with a high chloride content simultaneously with calcium in industrial effluents from a single sample injection. 50 μl of industrial effluent samples are injected into a carrier stream and are simultaneously dialysed in the double on-line dialyser for chloride and calcium. The dialysed chloride sample zones are further directed to a second dialyser that is incorporated in series with the first dialyser. This enables laboratories to determine samples with a very high chloride content up to 60 g/l simultaneously with calcium by using an automated tandem on-line dialysis technique. The fast and reliable fully automated two-component flow injection procedure operated at a sampling frequency of 90 samples per hour and the results obtained for chloride and calcium in industrial effluents compared well with those obtained by standard methods.     

Quarter wave plates for submillimeter wavelengths

A review is given of different types of quarter wave plates as presently used in the optical and microwave spectral range, with a view to their application in the sub-mm wave-length range. Two types of quarter wave plates have been constructed and results of measurements at 640m are given.     

Polarography of disodium pentacyanonitrosylferrate(II): Part 2. Determination at Therapeutic Levels in Serum,Plasma, and Whole Blood

Disodium pentacyanonitrosylferrat(II) (sodium nitroprusside) is determined at therapeutic (ng ml^?1) levels in plasma, serum and blood with conventional and high-performance differential pulse polarography (d.p.p. and h.p.d.p.p.) at a dropping mercury electrode or a static mercury drop electrode. Serum or plasma (3 ml) is treated with perchloric acid containing 1 mg ml^?1 potassium hexacyanoferrate(II), centrifuged for 10 min and subjected to polarography. For spiked serum, calibration graphs are linear over the range 30–1000 ng ml^?1 sodium nitroprusside, regardless of the polarographic technique; the estimated detection limit is 15 ng ml^?1 (5 × 10^?8 M). Calculated therapeutic levels range from 100 to 1000 ng ml^?1. Similar results were obtained for spiked plasma. A similar procedure is suitable for whole blood and was used to study the in-vitro degradation of sodium nitroprusside (200 ng ml^?1) on incubation at 37°C. The in-vitro loss is rapid (t_{$\text{1}\text{2}$} ≈ 6 min) but meaningful in-vivo levels can be obtained when the blood is collected in a 0.9% sodium chloride solution at 0°C. Thiocyanate, the main metabolite of nitroprusside, and thiosulphate, which is a potential antidote for cyanide, do not interfere.