Isolation of secondary metabolites from Hortia oreadica (Rutaceae) leaves through high-speed counter-current chromatography

High-speed counter-current chromatography (HSCCC) with a two-phase solvent system (hexane–ethanol–acetonitrile–water 10:8:1:1, v/v) was applied to examine the leaves of Hortia oreadica, which afforded the known limonoid guyanin (1), the alkaloids rutaecarpin (2) and dictamnine (6), the dihydrocinnamic acid derivatives methyl 5,7-dimethoxy-2,2-dimethyl-2H-1-benzopyran-6-propanoate (3), 5,8-dimethoxy-2,2-dimethyl-2H-1-benzopyran-6-propanoic acid (4), together with the new E-3,4-dimethoxy-α(3-hydroxy-4-carbomethoxyphenyl)cinnamic acid (5). The recovery of compounds 1–6 was determined by comparison with LC-atmospheric pressure chemical ionization MS/MS data: 66.2%, 93.1%, 102.5%, 101.2%, 99.0% and 84.9%, respectively. Compound 3 showed IC₅₀ of 23.6 μM against Plasmodium falciparum and 15.6 μM against Trypanosoma brucei rhodesienses and was not toxic to KB cells (IC₅₀ > 100 μM).     

LC Method for Studies on the Stability of Sibutramine in Soft Gelatin Capsules

A sensitive and rapid liquid chromatographic method was successfully developed and validated for the determination of sibutramine hydrochloride in bulk and capsules. Sibutramine in the presence of its degradation products was analyzed using UV detection at 225 nm. Chromatography was performed on a reversed-phase C₈ (150 × 4.0 mm I.D., 5 μm) analytical column under isocratic conditions. The mobile phase was composed of acetonitrile:water (aqueous phase containing 0.3% triethylamine and pH adjusted to 7.0) (75:25, v/v) at a flow-rate of 1.1 mL min⁻¹. No chromatographic interference was found during the analysis. Light was the stress condition which most contributed to sibutramine degradation. The method showed a linear response (r > 0.999) from 30 to 90 μg mL⁻¹. The mean recovery for capsules was 101.2%. Inter-day assays showed relative standard deviations of 0.42 and 1.62% for bulk and capsules, respectively. The developed method is able to separate sibutramine from its major degradation products and it may be used in the quality control of this active pharmaceutical ingredient in both bulk and capsules.

     

Structural studies of cyclic ureas: 3. Enthalpy of formation of barbital

A thermochemical and thermophysical study has been carried out for crystalline barbital [5,5′-diethylbarbituric acid]. The thermochemical study was made by static bomb combustion calorimetry, from which the standard () molar enthalpy of formation of the crystalline barbital, at T = 298.15 K, was derived as −(753.0 ± 1.8) kJ · mol⁻¹. The thermophysical study was made by differential scanning calorimetry over the temperature interval (265 to 470) K. A solid–solid phase transition was found at T = 413.3 K. The vapour pressures of the crystalline barbital were measured at several temperatures between T = (355 and 377) K, by the Knudsen mass-loss effusion technique, from which the standard molar enthalpy of sublimation, at T = 298.15 K was derived as (117.3 ± 0.6) kJ · mol⁻¹. The combination of the experimental results yielded the standard molar enthalpy of formation of barbital in the gaseous phase, at T = 298.15 K, as −(635.8 ± 1.9) kJ · mol⁻¹. This value is compared and discussed with our theoretical calculations by several methods (Gaussian-n theories G2 and G3, complete basis set CBS-QB3, density functional B3P86 and B3LYP) by means of atomization and isodesmic reaction schemes.     

Identification of free disaccharides and other glycosides in wine

Free soluble carbohydrates of different wine samples were analyzed by GC–MS as their trimethylsilyloximes using a methylsilicone column. Besides α,α-trehalose, several β-glucosylglucoses such as cellobiose, sophorose, laminaribiose and gentiobiose were the main disaccharides identified. With the exception of gentiobiose, these disaccharides are now reported for the first time in wine. Lactose (4-O-β-d-galactopyranosyl-d-glucose), previously described in this product, was also tentatively identified. Several free glycosides: β-ethyl-glucoside and seven glyceryl-glycosides (including glucosides and galactosides) were also identified for the first time in wine. On the contrary, disaccharides in grape juice were mainly constituted of fructose derivatives, including sucrose, and no glycosides were detected. Although the total amount of disaccharides was different in white wines (<50 mg/L) from those in rosé and red wines (80–130 mg/L), the chromatographic profile was noticeably similar in all wine samples. The method here reported allows the identification of several carbohydrates which have not been previously detected in wines and could contribute to increase the understanding of enzymatic activity during winemaking.     

Influence of physical-chemical interactions on the thermal stability and surface properties of poly(vinyl chloride)-b-poly(hydroxypropyl acrylate)-b-poly(vinyl chloride) block copolymers

The synthesis of poly(vinyl chloride) (PVC) homopolymers and poly(vinyl chloride)-b-poly(hydroxypropyl acrylate)-b-poly(vinyl chloride) (PVC-b-PHPA-b-PVC) block copolymers via a single electron - degenerative transfer mediated living radical polymerisation was carried out on a pilot scale in industrial facilities. The thermal stability of the products was assessed conductimetrically. The block copolymers, that contained a low content of PHPA (below 12 wt.%), showed thermal stability that was approximately three times greater than that of conventional PVC. Inverse gas chromatography study of the copolymers surface showed that there was a decrease in the dispersive component and greater Lewis acidity and basicity constants were observed relative to those of PVC. The thermal stabilisation of PVC when in the presence of PHPA is explained by the interactions between its functional groups and the structures formed during the thermal degradation. The thermal stability and the surface properties of PVC-b-PHPA-b-PVC were strongly dependent on the molecular weight of the block copolymer. Lewis acid-base interaction parameters were determined and are interpreted as evidence of the PVC-b-PHPA-b-PVC compatibilising function in PVC-wood flour composites.     

An aqueous two-phase system as a strategy for serum albumin depletion

An aqueous two-phase system, based on the cloud point phenomenon, was proposed for blood plasma albumin depletion prior to gel electrophoresis (SDS-PAGE) analysis. Albumin removal was evaluated using a mixture of Triton^® X-114 and SDS. Variables affecting phase separation and the partition coefficient (K), such as pH (from 5.0 to 7.6) and salt composition, were first optimized to carry out phase separation at room temperature and to promote albumin removal (15 min with ca. 95% efficiency) to the surfactant-rich phase, in a global process that results in reduction of 12% α-helix structures, confirmed through circular dichroism analysis. Gel electrophoresis analyses were carried out to compare crude human plasma composition with human plasma submitted to the cloud point procedure as well as the same plasma submitted to the separation of albumin using a commercially available system based on a chromatographic affinity column. The cloud point extraction procedure allowed identification of 18 protein bands present in the surfactant-poor phase, resulting in a more detailed electrophoretic profile, when compared with crude plasma (10 protein bands).     

In vitro photodynamic activity of chloro(5,10,15,20-tetraphenylporphyrinato)indium(III) loaded-poly(lactide-co-glycolide) nanoparticles in LNCaP prostate tumour cells

In(III)-meso-tetraphenylporphyrin (InTPP) was encapsulated into nanoparticles (smaller than 200 nm) of poly(d,l-lactide-co-glycolide) (PLGA) using the emulsification–evaporation technique. The photodynamic efficacy of InTPP-loaded nanoparticles and its cellular uptake was investigated with LNCaP prostate tumour cells, in comparison with the free InTPP. The effects of incubation time (1–3 h), drug concentration (1.8–7.7 μmol/L) and incident light dose (15–45 J/cm²) with both encapsulated and free InTPP were studied. The type of cell death induced by the photochemical process using both encapsulated and free InTPP was also investigated. Cell viability was reduced more significantly with increasing values of these effects for InTPP-loaded nanoparticles than with the free drug. The cellular death induced by both encapsulated and free InTPP was preponderantly apoptotic. Confocal laser scanning microscopy data showed that the InTPP-loaded nanoparticles, as well free InTPP, were localized in the cells, and always in the perinuclear region. Encapsulated InTPP was measured by the intensity of fluorescence intensity of cell extracts and was three times more internalized into the cells than was the free InTPP. Electron paramagnetic resonance experiments corroborated the participation of singlet oxygen in the photocytotoxic effect of nanoparticles loaded with InTPP.     

Structural and Mössbauer characterization of the ball milled Fex(Cr2O3)1−x system

The Fe_x(Cr₂O₃)_1?x system, with 0.10 ≤ X ≤ 0.80, was mechanically processed for 24 h in a high-energy ball-mill. In order to examine the possible formation of iron–chromium oxides and alloys, the milled samples were, later, thermally annealed in inert (argon) and reducing (hydrogen) atmospheres. The as-milled and annealed products were characterized by X-ray diffraction, Mössbauer spectroscopy, transmission electron microscopy and magnetization. The as-milled samples showed the formation of an Fe_1+YCr_2?YO_4?δ nanostructured and disordered spinel phase, the α₁-Fe(Cr) and α₂-Cr(Fe) solid solutions and the presence of non-exhausted precursors. For the samples annealed in inert atmosphere, the chromite (FeCr₂O₄) formation and the recrystallization of the precursors were verified. The hydrogen treated samples revealed the reduction of the spinel phase, with the phase separation of the chromia phase and retention of the Fe–Cr solid solutions. All the samples, either as-milled or annealed, presented the magnetization versus applied field curves typical for superparamagnetic systems.