Development and Validation of a High-Performance Thin-Layer Chromatographic Method for the Assay of Ternary Mixtures Containing Cetirizine Dihydrochloride in Pharmaceutical Dosage Forms

JPC – Journal of Planar Chromatography – Modern TLC - A highly validated and selective high-performance thin-layer chromatography (HPTLC) method was developed for the determination of...     

Click Synthesis of 1,2,3-Triazole Nucleosides Based on Functionalized Nicotinonitriles

Russian Journal of Organic Chemistry - A facile synthesis of a new series of 1,2,3-triazolyl nucleosides via one-pot click reaction is described. Acetylenic nicotinonitriles synthesized previously...     

Structure and Magnetic Properties of Nickel–Zinc Ferrite Nanoparticles Prepared by Glass Crystallization Method

Summary. The magnetic and microstructure properties of Fe₂O₃–0.4NiO–0.6ZnO–B₂O₃ glass system, which was subjected to heat treatment in order to induce a magnetic crystalline phase (Ni_0.4Zn_0.6-Fe₂O₄ crystals) within the glass matrix, were investigated. DSC measurement was performed to reveal the crystallization temperature of the prepared glass sample. The obtained samples, produced by heat treatment at 765°C for various times (1, 1.5, 2, and 3 h), were characterized by X-ray diffraction, IR spectra, transmission electron microscopy, and vibrating sample magnetometer. The results indicated the formation of spinel Ni–Zn ferrite in the glass matrix. Particles of the ferrite with sizes ranging from 28 to 120 nm depending on the sintering time were observed. The coercivity values for different heat-treatment samples were found to be in the range from 15.2 to 100 Oe. The combination of zinc content and sintering times leads to samples with saturation magnetization ranging from 12.25 to 17.82 emu/g.     

Glycosidases of turnip leaf tissues

Four myrosinase (β-thioglucosidase EC. 3.2.3.1) and seven disaccharase (β-fructofuranosidase, EC. 3.2.1.26) isoenzymes were isolated from turnip leaves. The most active enzymes were isolated in pure form. Myrosinase and disaccharase mol wt was 62.0 × 10³ and 69.5 × 10³ dalton, respectively, on the basis of gel filtration on Sephadex G-200. Myrosinase pH profile showed high activity between pH 5 and 7 with the optimum at pH 5.5. The purified enzyme was heat-stable for 60 min at 30°C with only loss of 24% of activity. Its activity is strongly inhibited (100%) by Pb²⁺, Ba²⁺, Cu²⁺ and Ca²⁺ ions, and activated (70%) by EDTA at 0.04M. The pure enzyme failed to hydrolyze amylose, glycogen, lactose, maltose, and sucrose. TheK _m andV _max values of myrosinase using sinigrin as specific substrate was 0.045 mM and 2.5 U, respectively. The maximal activity of disaccharase enzyme was obtained at pH 4–5 and 35–37°C. The enzyme was heat-stable at 30°C for 30 min with only 10% loss of its activity. Its activity is strongly activated (70–240%) by Ca²⁺, Ba²⁺, Cu²⁺, and EDTA at 0.01M. The enzyme activity is specific to the disaccharide sucrose and failed to hydrolyze other disaccharides (maltose and lactose). TheK _m andV _max of disaccharase were 0.123 mM and 3.33 U, respectively.     

Beating cancer in multiple ways using nanogold

Gold nanoparticles possess a unique combination of properties which allow them to act as highly multifunctional anti-cancer agents (X. H. Huang, P. K. Jain, I. H. El-Sayed and M. A. El-Sayed, Nanomedicine, 2007, 2, 681-693; P. Ghosh, G. Han, M. De, C. K. Kim and V. M. Rotello, Adv. Drug Delivery Rev., 2008, 60, 1307-1315; S. Lal, S. E. Clare and N. J. Halas, Acc. Chem. Res., 2008, 41, 1842-1851; D. A. Giljohann, D. S. Seferos, W. L. Daniel, M. D. Massich, P. C. Patel and C. A. Mirkin, Angew. Chem., Int. Ed., 2010, 49, 3280-3294). Not only can they be used as targeted contrast agents for photothermal cancer therapy, they can serve as scaffolds for increasingly potent cancer drug delivery, as transfection agents for selective gene therapy, and as intrinsic antineoplastic agents. This tutorial review will highlight some of the many forms and recent applications of these gold nanoparticle conjugates by our lab and others, as well as their rational design and physiologic interactions.     

Gold and silver nanoparticles in sensing and imaging: sensitivity of plasmon response to size, shape, and metal composition

Plasmonic metal nanoparticles have great potential for chemical and biological sensor applications, due to their sensitive spectral response to the local environment of the nanoparticle surface and ease of monitoring the light signal due to their strong scattering or absorption. In this work, we investigated the dependence of the sensitivity of the surface plasmon resonance (frequency and bandwidth) response to changes in their surrounding environment and the relative contribution of optical scattering to the total extinction, on the size and shape of nanorods and the type of metal, that is, Au vs Ag. Theoretical consideration on the surface plasmon resonance condition revealed that the spectral sensitivity, defined as the relative shift in resonance wavelength with respect to the refractive index change of surrounding materials, has two controlling factors: first the bulk plasma wavelength, a property dependent on the metal type, and second on the aspect ratio of the nanorods which is a geometrical parameter. It is found that the sensitivity is linearly proportional to both these factors. To quantitatively examine the dependence of the spectral sensitivity on the nanorod metal composition and the aspect ratio, the discrete dipole approximation method was used for the calculation of optical spectra of Ag-Au alloy metal nanorods as a function of Ag concentration. It is observed that the sensitivity does not depend on the type of the metal but depends largely on the aspect ratio of nanorods. The direct dependence of the sensitivity on the aspect ratio becomes more prominent as the size of nanorods becomes larger. However, the use of larger nanoparticles may induce an excessive broadening of the resonance spectrum due to an increase in the contribution of multipolar excitations. This restricts the sensing resolution. The insensitivity of the plasmon response to the metal composition is attributable to the fact that the bulk plasma frequency of the metal, which determines the spectral dispersion of the real dielectric function of metals and the surface plasmon resonance condition, has a similar value for the noble metals. On the other hand, nanorods with higher Ag concentration show a great enhancement in magnitude and sharpness of the plasmon resonance band, which gives better sensing resolution despite similar plasmon response. Furthermore, Ag nanorods have an additional advantage as better scatterers compared with Au nanorods of the same size.     

Gold nanoparticles: catalyst for the oxidation of NADH to NAD(+)

Nicotinamide adenine dinucleotide is an important coenzyme involved in the production of ATP, the fuel of energy, in every cell. It alternates between the oxidized form NAD(+) and the reduced form dihydronicotinamide adenine dinucleotide (NADH) and serves as a hydrogen and electron carrier in the cellular respiratory processes. In the present work, the catalytic effect of gold nanoparticles on the oxidization of NADH to NAD(+) was investigated. The addition of gold nanoparticles was found to quench the NADH fluorescence intensities but had no effect on the fluorescence lifetime. This suggested that the fluorescence quenching was not due to coupling with the excited state, but due to changing the ground state of NADH. The intensity of the 340 nm absorption band of NADH was found to decrease while that of the 260 nm band of NAD(+) was found to increase as the concentration of gold nanoparticles increased. This conversion reaction was further supported by nuclear magnetic resonance and mass spectroscopy. The effect of the addition of NADH was found to slightly red shift and increase the intensity of the surface plasmon absorption band of gold nanoparticles at 520 nm. This gives a strong support that the conversion of NADH to NAD(+) is occurring on the surface of the gold nanoparticles, i.e. NADH is surface catalyzed by the gold nanoparticles. The catalytic property of this important reaction might have important future applications in biological and medical fields.     

Shift to Pseudomonic acid B production in P. fluorescens NCIMB10586 by mutation of mupirocin tailoring genes mupO, mupU, mupV, and macpE

Mupirocin, a polyketide-derived antibiotic from Pseudomonas fluorescens NCIMB10586, is a mixture of pseudomonic acids (PA) that target isoleucyl-tRNA synthase. The mup gene cluster encodes both type I polyketide synthases and monofunctional enzymes that should play a role during the conversion of the product of the polyketide synthase into the active antibiotic (tailoring). By in-frame deletion analysis of selected tailoring open-reading frames we show that mupQ, mupS, mupT, and mupW are essential for mupirocin production, whereas mupO, mupU, mupV, and macpE are essential for production of PA-A but not PA-B. Therefore, PA-B is not simply produced by hydroxylation of PA-A but is either a precursor of PA-A or a shunt product. In the mupW mutant, a new metabolite lacking the tetrahydropyran ring is produced, implicating mupW in oxidation of the 16-methyl group.     

Assessment of pulmonary artery stiffness using velocity-encoding magnetic resonance imaging: evaluation of techniques

The loss of pulmonary artery (PA) compliance has significant pathophysiological effect on the right ventricle. Noninvasive and reliable assessment of PA wall stiffness would be an essential determiner of right heart load and a clinically useful factor to assess cardiovascular risk. Two MRI techniques have been proposed for assessing PA stiffness by measuring pulse wave velocity (PWV): transit time (TT) and flow area (QA). However, no data are available that compares the two techniques and evaluates their performance, especially over a wide range of PWV values or at 3.0-T, which is the purpose of the present study. Thirty-three patients with different heart conditions were imaged using optimized high-temporal resolution and high-spatial resolution velocity-encoding MRI sequences. Statistical analysis was conducted to study intermethod, interobserver and intraobserver variabilities. The PWV measurements using TT and QA techniques showed good agreement (P>0.1). The Bland-Altman analysis showed negligible differences between the two methods (mean±S.D.=0.11±0.35 m/s, correlation coefficient r=0.94). The repeated measurements showed low interobserver and intraobserver variabilities, although the S.D. of the differences was larger in the QA technique. The mean±S.D. of the TT/QA measurement differences were −0.05±0.2/0.0±0.36 m/s and 0.02±0.26/0.02±0.39 m/s for the interobserver and intraobserver differences, respectively. In conclusion, each technique has its own advantages and disadvantages. The two techniques result in similar measurements, although the QA method is more subjective due to its dependency on operator intervention.