Structural study of NiXMg1–XFe2O4 ferrites

The ferrite system Ni _x Mg_1-x Fe₂O₄ with 0≤x≤1 was prepared using the usual ceramic technique. The prepared samples were studied by X-ray diffraction and IR spectroscopy. X-ray diffraction analysis proved that all the samples were single-phase with the cubic spinel structure. The lattice constant, radius of the tetrahedral ion, unshared octahedral edge, tetrahedral bond and tetrahedral edge decrease while the bulk and theoretical densities, radius of octahedral ion, octahedral bond and shared octahedral edge increase as nickel ion substitution increases. The positions and intensities of the four bands of IR absorption spectra characterizing ferrites are composition dependent.     

Kinetic parameters,collision rates,energy exchanges and transport coefficients of non-thermal electrons in premixed flames at sub-breakdown electric field strengths

The effects of an electric field on the collision rates, energy exchanges and transport properties of electrons in premixed flames are investigated via solutions to the Boltzmann kinetic equation. The case of high electric field strength, which results in high-energy, non-thermal electrons, is analysed in detail at sub-breakdown conditions. The rates of inelastic collisions and the energy exchange between electrons and neutrals in the reaction zone of the flame are characterised quantitatively. The analysis includes attachment, ionisation, impact dissociation, and vibrational and electronic excitation processes. Our results suggest that Townsend breakdown occurs for E/N = 140 Td. Vibrational excitation is the dominant process up to breakdown, despite important rates of electronic excitation of CO, CO₂ and N₂ as well as impact dissociation of O₂ being apparent from 50 Td onwards. Ohmic heating in the reaction zone is found to be negligible (less than 2% of peak heat release rate) up to breakdown field strengths for realistic electron densities equal to 10¹⁰ cm^?3. The observed trends are largely independent of equivalence ratio. In the non-thermal regime, electron transport coefficients are insensitive to mixture composition and approximately constant across the flame, but are highly dependent on the electric field strength. In the thermal limit, kinetic parameters and transport coefficients vary substantially across the flame due to the spatially inhomogeneous concentration of water vapour. A practical approach for identifying the plasma regime (thermal versus non-thermal) in studies of electric field effects on flames is proposed.     

Propagation characteristics of Bessel-like beams through ABCD optical system

Based on the Collins diffraction integral formula, this work focus to the study of the propagation properties of a Bessel-like beam through an ABCD optical system. As it is not easy to develop an analytical expression describing the transformation of the Bessel-like beams by an ABCD optical system, numerical integration method was indispensable to conduct this research. The characteristics of the transformation of Bessel-like beams by three optical systems: free space, Fourier transform, Fractional Fourier transform system and quadratic graded-index system are numerically examined and treated as examples of optical systems in this investigation. Some numerical results are carried-out to show how the superposition of multiple Airy beams propagates and transforms by an ABCD optical system.     

First-principle calculations of structural,electronic, optical,elastic and thermal properties of $$\hbox {MgXAs}_{2}$$ ($$\hbox {X}=\hbox {Si}, \hbox {Ge}$$X=Si,Ge) compounds

First-principle calculations on the structural, electronic, optical, elastic and thermal properties of the chalcopyrite \(\hbox {MgXAs}_{2}\) (\(\hbox {X}=\hbox {Si}, \hbox {Ge}\)) have been performed within the density functional theory (DFT) using the full-potential linearized augmented plane wave (FP-LAPW) method. The obtained equilibrium structural parameters are in good agreement with the available experimental data and theoretical results. The calculated band structures reveal a direct energy band gap for the interested compounds. The predicted band gaps using the modified Becke–Johnson (mBJ) exchange approximation are in fairly good agreement with the experimental data. The optical constants such as the dielectric function, refractive index, and the extinction coefficient are calculated and analysed. The independent elastic parameters namely, \(C_{11}\), \(C_{12}\), \(C_{13}\), \(C_{33}\), \(C_{44}\) and \(C_{66 }\) are evaluated. The effects of temperature and pressure on some macroscopic properties of \(\hbox {MgSiAs}_{2}\) and \(\hbox {MgGeAs}_{2}\) are predicted using the quasiharmonic Debye model in which the lattice vibrations are taken into account.     

The Significance of Mobilization and Immobilization of Specific Radionuclides for Optimum Bioleaching Conditions Using Aspergillus lentulus

Physics of Particles and Nuclei Letters - Gamma spectrometry is applied for measurement of natural radioactivity by Hyper-pure germanium (HPGe) systems during the application of bioleaching optimum...     

EPR on Medically Relevant NO Adsorbed to Zn-LTA

For medical purposes, materials are required that store and target specifically deliver exogenous nitric oxide (NO). Partially zinc-exchanged Na-LTA (Linde type A) zeolite (Zn-LTA) has high potential in this respect due to its non-toxicity and adsorption capacity for NO. In contrast to NO adsorbed to LTA zeolites prepared for catalytic purposes, lower dehydration temperature prior to NO adsorption is used to achieve a balance between production cost and high activity. In order to study the interaction of NO with the metal sites in the samples prepared under these medical conditions, continuous-wave X-band electron paramagnetic resonance has been applied. In contrast to Na-LTA with only one weakly interacting NO monomer, three different monomers, having stronger interaction to the metal sites than in Na-LTA, were observed in Zn-LTA. To improve the storage capacity of Zn-LTA, higher dehydration temperatures would be necessary.     

Lateral electric field effects on quantum size confinement in cylindrical quantum dot under parabolic potential

Within the effective mass approximation, we investigated theoretically the ground-state energy of a single particle and the binding energy of the neutral donor impurity (D⁰) affected by a lateral electric field in a parabolic quantum dot (QD). The results show that the electron and the hole ground-state energy and the band to band transition energies shift to lower values (red shift) by increasing the field intensity. The quantum Stark shift (QSS) for the electron increases rapidly in the quasi spherical QD (QSQD) by increasing the lateral field, whereas for the hole it increases monotony. In the cylindrical QDs (CQDs), we found that the QSS for electron and hole increase monotonically. The quantum size, lateral electric field and impurity position effect on the binding energy of neutral donor (D⁰) is studied. Unexpected behavior of D⁰ in quantum well limit (QW), the binding energy of D⁰ is increasing (blue shift) with increasing QD radius R$R$ at the presence of a lateral electric field. It appears that for a fixed size of the QD, the off-center binding energy decreases when the impurity ion is displaced from the center to the QD borders, while it is shifted to lower energy with increasing the field.     

The use of Omega Chrome Fast Blue 2G in the microdetermination of some metals

Summary Omega Chrome Fast Blue 2G has been found to be a suitable indicator for the detection of the equivalence point of calcium, magnesium and manganese in the presence of cadmium, nickel, and aluminium, when they are masked by the addition of cyanide or triethanolamine. It is also a suitable indicator for the back titration of aluminium using calcium or magnesium as a back titrant.This dye has also been found to be a suitable reagent for the colorimetric determination of calcium, magnesium, manganese and thorium.     

Isolierung und Nachweis basischer Arzneimittel in der Toxikologie

Zusammenfassung Zu den schwierigsten Aufgaben der toxikologischen Analyse gehört die rasche und sichere Isolierung und Identifizierung organischer Basen aus dem Untersuchungsmaterial. Mit einem entsprechenden Extraktionsverfahren oder durch Fällung mit Tetraphenylborat in einem systematischen Analysengang können sehr günstige Ausbeuten erzielt werden. Die Reinigung der Rohextrakte oder -fällungen erfolgt prinzipiell mittels Dünnschichtchromatographie. Aus den Tetraphenylboratkomplexen werden dabei auf den Kieselgelschichten die reinen Basen in Freiheit gesetzt. An Hand derR _f- Wert-Tabellen ist eine Identifizierung möglich, wobei Substanzen mit gleichemR _f- Wert durch fraktionierte Extraktion bei verschiedenem p_H getrennt werden können. Eine weitere Identifizierung kann mit Hilfe der UV-Spektren erfolgen.

---

Summary Among the most difficult problems of toxicological analysis are the rapid and reliable isolation and identification of organic bases from the material under examination. Very satisfactory yields can be obtained by means of a suitable extraction procedure or through precipitation with tetraphenyl borate in a systematic scheme of analysis. The purification of the crude extracts or precipitates is accomplished fundamentally by thin layer chromotography. The pure bases are liberated on the silica layers from the tetraphenyl borate complexes. An identification is possible through reference toR _f- tables; substances with likeR _f value can be separated by fractional extraction at different p_H values. A further identification can be made with the aid of UV spectra.

---

Résumé L'isolement rapide et sûr des bases organiques dans une substance à l'étude et leur identification représentent l'un des problèmes les plus difficiles de l'analyse toxicologique. On peut atteindre des rendements très satisfaisants avec un procédé d'extraction analogue ou par précipitation par le tétraphénylborure dans un processus d'analyse systématique. La purification de l'extrait brut ou des produits de précipitation s'effectue principalement au moyen de la chromatographie en couche mince. Les bases pures sont libérées des complexes au tétraphénylborure en opérant sur couches en gel de silice. On peut faire une identification en se servant des valeurs desR _f figurant dans les tables, ce qui permet de séparer les substances de mêmeR _f par extraction fractionnée à des p_H différents. Une identification plus poussée peut avoir lieu à l'aide des spectres UV.

     

Spectrophotometric Studies of Entrapped Thymol Phtalein pH Indicator into Sol‐Gel Matrix

This research involves the behavior of thymol phtalein pH indicator entrapped into the sol‐gel derived inorganic matrix. The method is based on the physical entrapment of the reagent molecules in the sol‐gel matrix. The immobilized thymol phthalein pH indicator shows behavior similar to its solution counterpart. The UV/vis spectra indicate that the thymol phthalein retains its structure during the sol‐gel reactions in terms of response to pH. Thymol phthalein can be regarded as uniformly distributed in the sol‐gel matrix. This observation has been confirmed using polarized microscopy. This research shows that thymol phtalein can be immobilized in sol‐gel glasses and used as a solid pH sensor.