Effects of structural factors on the pi-dimerization and/or disproportionation of the cation radical of extended TTF containing thiophene-based pi-conjugated spacers

The electrochemical and chemical oxidation of extended TTF 4 and 5 are analysed by cyclic voltammetry, Visible/NIR and ESR spectroscopies, and the X-ray structures of the new salts 5 x BF(4)(CH(2)Cl(2)) and 4 x ClO(4)(THF)(1/2) are presented. The effects of structural factors on the pi-dimerization or the disproportionation reaction of the cation radical are shown. The oxidation of compound 4 presents the successive formation of stable cation radical and dication species both in dichloromethane (DCM) and in a CH(3)CN/THF mixture. In contrast, for compound 5, the stability of the oxidation states strongly depends on the nature of the solvent. In DCM, the oxidation of 5 proceeds by two close one-electron transfers while in CH(3)CN/THF the dication is directly formed via a two-electron process. The X-ray structures of the two salts reveal the formation of pi-dimers of cation radical. While the dimer (5(2))(2+) is due mainly to pi-pi interactions between the conjugating spacer, the multiplication of the sulfur atoms in compound 4 contributes to stabilize the dimer by the combined effects of S-S and pi-pi interactions. Visible/NIR and ESR experiments confirm the higher tendency of 4(+)(.) to dimerize with the occurrence of dimer and monomer in solution, while for 5(+)(.) only the monomer is detected in DCM. On the other hand, by dissolution of 5 x BF(4)(CH(2)Cl(2)) in CH(3)CN, only the neutral and the dicationic states of compounds 5 are observed owing to the disproportionation reaction.     

Alkylation of 2‐pyridinones: Synthesis of novel acyclonucleosides

This paper presents the synthesis of some novel acyclonucleosides containing 2‐pyridinones and 2‐hydroxyethoxymethyl, 2,3‐dihydroxy‐propyl side chain. The tosylate of these nucleosides analogues could be modified to azido derivatives. Also, acyclonucleosides with 1‐ethoxymethyl, 1‐benzyloxymethyl, 1‐methylthiomethy 1 and 2‐hydroxyethyl side chains have been investigated. The O‐alkylated pyridine derivatives were obtained during most reactions.     

Alkenyl selenols and selenocyanates: synthesis, spectroscopic characterization by photoelectron spectroscopy, and quantum chemical study

Vinyl, allyl, and homoallyl selenols were easily prepared by a chemoselective reduction of the corresponding selenocyanates with aluminum hydrides. Two stable vinyl and five stable allyl conformers of both series were predicted on the potential-energy surface. The interaction of SeH or SeCN groups with the vinyl group has been investigated with UV photoelectron spectroscopy and quantum chemical calculations, using the MP2/cc-pVTZ and B3LYP/cc-pVTZ levels. In the vinyl derivatives, a surprisingly strong direct conjugation of the selenium lone electron pair and the C=C double bond was observed. On the other hand, in allyl position the selenium lone pair is independent on the C=C double bond, and the hyperconjugation between the Se-C bond and the double bond is the ruling effect. Thus is clarified the type and extent of the interaction between the SeH or SeCN group and the unsaturated moiety.     

Nitrogen Adsorption Study of MCM-41 Molecular Sieves Synthesized Using Hydrothermal Restructuring

Nitrogen desorption scanning hysteresis loops (DSHLs) for large-pore MCM-41 silicas (pore diameter from 4.0 to 6.5 nm) are reported for the first time. DSHLs for MCM-41 were compared with those of conventional mesoporous silicas and no appreciable differences were found, although hysteresis loops and DSHLs for the latter were usually broader. Since desorption behavior of conventional porous silicas is appreciably influenced by pore connectivity, the observed similarity in hysteresis behavior suggests single-pore blocking effects for MCM-41 due to variation of pore diameter along its nonintersecting channels. It was also shown that the steepness of nitrogen desorption branches at relative pressures close to 0.4 often results from proximity of the lower pressure limit of adsorption-desorption irreversibility and consequently it is not justified to consider it as an indication of narrow pore size distribution. Thus, application of desorption data in calculations of pore size distributions may be grossly misleading.     

Capillary electrochromatography with monolithic silica columns III. Preparation of hydrophilic silica monoliths having surface-bound cyano groups: chromatographic characterization and application to the separation of carbohydrates, nucleosides, nucleic acid bases and other neutral polar species

Two synthetic routes have been introduced and evaluated for the preparation of hydrophilic silica-based monoliths possessing surface-bound cyano functions. In one synthetic scheme, the silica monolith was reacted in a single step with 3-cyanopropyldimethylchlorosilane to yield a cyano phase referred to as CN-monolith. In a second synthetic route, the silica monolith was first reacted with gamma-glycidoxypropyltrimethoxysilane (gamma-GPTS), followed by a reaction with 3-hydroxypropionitrile (3-HPN) to give a stationary phase denoted CN-OH-monolith. Although the gamma-GPTS was intended to play the role of a spacer arm to link the 3-HPN to the silica surface, this spacer arm became an integral part of the hydrophilic stationary phase. Thus, the CN-OH-monolith can be viewed as a double-layered stationary phase (i.e., stratified phase) with a hydroxy sub-layer and a cyano top layer. Due to its stronger hydrophilic character, the CN-OH-monolith yielded higher retention and better selectivity than the CN-monolith. The CN-OH-monolith was demonstrated in the normal-phase capillary electrochromatography (CEC) of various polar compounds including phenols and chloro-substituted phenols, nucleic acid bases, nucleosides, and nitrophenyl derivatives of mono- and oligosaccharides. The CN-OH-monolith yielded a relatively strong electroosmotic flow over a wide range of mobile phase composition, thus allowing rapid separation of the polar compounds studied.     

Enaminones in heterocyclic synthesis: Synthesis and chemical reactivity of 3‐anilino‐1‐substituted‐2‐propene‐1‐ one

The 3‐anilinoenones 3a,b were prepared from the corresponding 3‐dimemyl‐aminopropenones. The reactivity of 3a,b towards a variety of carbon and nitrogen nucleophiles as well as naphthoquinones is reported.     

Selective monodeoxygenation of quinoxaline-amino acid and ester dioxides

Trimethyl phosphite selectively removes the N-1-oxygen in N-(3-methyl-2-quinoxaloyl) L-α-amino ester-1,4-dioxides, whereas it removes the N-4-oxygen in the corresponding series of dioxides lacking the C₃-Me. This selectivity reversal reflects the relative strength of the intrahydrogen-bridging to the N-1-oxygen. The monoxides having the favourable N-oxygen are not reduced to the quinoxalines, implying that the reagent requires doubling of the N-oxide function for deoxygenation. However, alkaline sodium dithionite removes the N-1-oxygen in both series of the amino acid-dioxides, as well as in the parent quinoxaline-2-carboxylic acid-dioxides, a result that contradicts the report stating removal of the N-4-oxygen. The N-oxygenated quinoxalinium ion ($\text{m}\text{e}$ 145 or 159) prevails in the MS of the 4-oxides, but it is not observed (<1%) for the isomeric 1-oxides. ¹H NMR, ¹³C NMR and UV spectral data also offer diagnostic criteria for differentiation between the isomeric 1- and 4-oxides. Aryl-heteryl “interaction” (as revealed by ¹H NMR, though not by ¹³C NMR in the aromatic amino ester dioxides) is not manifested in the corresponding monoxides.     

Gamma-radiation effects on the reduction of hematite to iron in the graphite-iron(III) oxide system

The effects of⁶⁰Co-gamma radiation and of various sample composition on the reduction of hematite to iron in the graphite-iron(III) oxide system in air were studied using isothermal and dynamic TG techniques. Kinetic analysis of isothermal data were performed according to various theoretical models of heterogeneous reactions and the results showed that the three-dimensional phase boundary model gives the best fit of data. Analysis of dynamic TG data were made using Ozawa integral method, Coats-Redfern method and a composite method based on the modified Coats and redfern equation. The activation parameters were calculated and the results of the different methods were compared and discussed.Radiation apparently did not introduce a change in the reaction model or mechanism. However, there is a decrease in activation energy and frequency factor upon irradiation and a decrease in the half-life time of the reaction which is remarkable at the higher temperatures and higher doses.

---

Zusammenfassung Mittels isothermer und dynamischer TG wurde im Graphit-Eisen(III)oxidsystem in Luft der Einfluß von⁶⁰Co-Gammastrahlung und von verschiedenen Probenzusammensetzungen auf die Reduktion von Hämatit zu Eisen untersucht. Entsprechend verschiedener theoretischer Modelle heterogener Reaktionen wurde eine kinetische Analyse der isothermen Daten durchgeführt und die Ergebnisse zeigten, daß das dreidimensionale Phasengrenzenmodell die beste Übereinstimmung liefert. Die Analyse der dynamischen TG-Daten wurde mittels der Integralmethode von Ozawa, der Coats-Redfem-Methode und einer zusammengesetzten Methode auf der Grundlage der modifizierten Coats und Redfern Gleichung durchgeführt. Die Aktivierungsparameter wurden berechnet und die Ergebnisse der verschiedenen Methoden miteinander verglichen und diskutiert.Strahlung scheint keine Änderung des Reaktionsmodelles oder des Mechanismus hervorzurufen. Durch Bestrahlung gibt es aber ein Absinken der Aktivierungsenergie und des Frequenzfaktors sowie ein Absinken der Halbwertszeit der Reaktion, was bei höheren Temperaturen und höherer Dosis bemerkenswert groß ist.

     

Oscillating repulsive force between macroscopic surfaces as a consequence of the fluctuation of the density in the gap region

We try to explain the short-range repulsive force between surfaces as a consequence of a decrease in the configurational entropy of liquid molecules in the gap region as the width of the gap decreases. A simple model shows that the density has an oscillating variation when the surfaces are pushed towards each other. As a consequence, an oscillating repulsive force appears between the macroscopic surfaces, which is the result of a loss of configurational freedom of the liquid molecules because of their orientation in the gap. Received: 14 August 2000 Accepted: 30 January 2001