Hygrometric Determination of Water Activities, Osmotic and Activity Coefficients, and Excess Gibbs Energy of the System MgSO4–K2SO4–H2O

Ternary aqueous solutions of MgSO₄ and K₂SO₄ have been studied by the hygrometric method at 25°C. The relative humidity of this system is measured at total molalities from 0.35 mol-kg^–1 to about saturation for three ionic-strength fractions (y = 0.25, 0.50, and 0.80 of MgSO₄. The data allow calculation of water activities and osmotic coefficients. From these measurements, the Pitzer ionic mixing parameters are determined and used to predict the solute activity coefficients in the mixture. The results are used to calculate the excess Gibbs energy at total molalities for ionic-strength fraction y.     

Thermal decomposition of surface compounds for the generation of small quantities of acetaldehyde: Calibration of a thermal desorption-gas chromatography-flame ionization detection

The paper presents a new method for the generation of acetaldehyde in the amounts that allow to calibrate the measuring system. The method is based on thermal decomposition of surface compounds at the range 130-190 °C, in which an acetaldehyde as the decomposition product is released. The synthetic pathway leading to the desired surface compounds is described. Investigations demonstrated that the synthesis of the compounds on the surface of the support material (silica gel) was carried out homogeneously. The technique proposed was used for the generation of gaseous standard mixtures containing acetaldehyde for the calibration of a thermal desorber-gas chromatograph-flame ionization detector system.     

Synthesis and Visible Spectral Behaviour of Some New N‐Bridgehead Heterocyclic Cyanine Dyes Incorporating Pyrazolo (4,5‐b) Indolizine (Benzoindolizine)

The new unsymmetrical N‐bridgehead, apo (zeromethine), mono‐methine, dimethine, meso substituted tetramethine and styryl cyanine dyes incorporating pyrazolo (4,5‐b) indolizine (benzoindolizine) nuclei were prepared. Structural confirmation was carried out by elemental analyses, IR, H‐NMR, mass spectra and ¹³C‐NMR with the aid of carbon DEPT spectral data. The visible absorption spectra for the newly synthesized cyanines were examined in 95% ethanol.     

Prevention of ultraviolet-B radiation damage by resveratrol in mouse skin is mediated via modulation in survivin

Nonmelanoma skin cancer is the most frequently diagnosed malignancy in the United States, and multiple exposures to solar ultraviolet (UV) radiation (particularly its UV-B component, 290-320 nm), is its major cause. 'Chemoprevention' by naturally occurring agents is being appreciated as a newer dimension in the management of neoplasia including skin cancer. We recently demonstrated that resveratrol (trans-3, 5, 4-trihydroxystilbene), an antioxidant found in grapes, red wines and a variety of nuts and berries, imparts protection from acute UV-B-mediated cutaneous damages in SKH-1 hairless mice. Understanding the mechanism of resveratrol-mediated protection of UV responses is important. We earlier demonstrated that resveratrol imparts chemopreventive effects against multiple UV-exposure-mediated modulations in (1) cki-cyclin-cdk network, and (2) mitogen activated protein kinase (MAPK)-pathway. This study was conducted to assess the involvement of inhibitor of apoptosis protein family Survivin during resveratrol-mediated protection from multiple exposures of UV-B (180 mJ/cm(2); on alternate days; for a total of seven exposures) radiations in the SKH-1 hairless mouse skin. Our data demonstrated that topical pre-treatment of resveratrol (10 micromol in 200 microl acetone/mouse) resulted in significant inhibition of UV-B exposure-mediated increases in (1) cellular proliferations (Ki-67 immunostaining), (2) protein levels of epidermal cyclooxygenase-2 and ornithine decarboxylase, established markers of tumor promotion, (3) protein and messenger RNA levels of Survivin, and (4) phosphorylation of survivin in the skin of SKH-1 hairless mouse. Resveratrol pretreatment also resulted in (1) reversal of UV-B-mediated decrease of Smac/DIABLO, and (2) enhancement of UV-B-mediated induction of apoptosis, in mouse skin. Taken together, our study suggested that resveratrol imparts chemopreventive effects against UV-B exposure-mediated damages in SKH-1 hairless mouse skin via inhibiting Survivin and the associated events.     

Emulsion liquid membrane extraction of fission products promoted by polyvalent and organic acids

Emulsion liquid membranes (ELM) with di-2-ethylhexylphosphoric acid in n-alkane, and dipicrylamine and cobalt(III) dicarbollide in nitrobenzene stabilized in double emulsions by SPAN 80/85 surfactant were used for preconcentration of radioactive fission products (¹³⁷Cs,⁹⁰Sr,¹³⁹Ce, and¹⁵²Eu) from slightly acidic nitrate solutions. The efficiency of sulfuric, phosphotungstic and silicotungstic acids as stripping agents, and picric acid as the bulky anion additive was investigated. A group separation of the fission products is possible by the ELM technique and can be considered for their removal from waste water solutions.     

Synthesis and elaboration of functionalised carbohydrate-derived spiroketals

The scope of a stereoselective three-step approach for the synthesis of sugar derived spiroketals is presented. The methodology consists of Grignard addition of vinyl- or allylmagnesium bromide to a carbohydrate lactone, followed by K-10 clay mediated glycosidation with a terminal alkenol and subsequent ring-closing metathesis of the resulting diene. The generality of this procedure is demonstrated by the synthesis of various pyranose- and furanose-derived spiroketals, as well as more advanced tricyclic spiroketal derivatives. It is shown that functionalisation of the double bond in the resulting spiroketals leads to fused polycyclic ethers.     

The physical properties of pressure sensitive rubber composites

Nitrile butadiene rubber, NBR, structural foam of different apparent densities was obtained by using different concentrations of foaming agent, azodicarbonamide, ADC/K. The true stress-strain characteristics, in case of compression, of foamed samples after the application of cyclic stress-strain were measured. The effect of the cyclic stress-strain on strain energy density of ADC/K foaming agent-filled NBR rubber composites was studied. The mechanical parameters were found to depend on the foaming agent concentration and on the pre-cyclic fatigue number. Results also indicated that the strain energy decreased with filler concentration.The effects of the cyclic stress-strain on the conductivity of ADC/K foaming agent-filled NBR rubber composites were studied. The electrical properties were found to depend on the foaming agent concentration, the strain amplitude and the number of stress-strain cycles of pre-strain. This study was assisted by the current-voltage characteristics which were measured under the effect of different compression ratios: 0%, 5%, 10%, 15%, 20%, 25% and 30%. The free current carrier mobility and the equilibrium concentration of charge carriers in the conduction band were produced as functions of compressive strain. Results also indicate that there is a linear variation between pressure and conductivity for all samples, which means that these samples can be used as a pressure sensor.     

Chloroplast Biogenesis 77: Two Novel Monovinyl and Divinyl Light-Dark Greening Groups of Plants and Their Relationship to the Chlorophyll a Biosynthetic Heterogeneity of Green Plants

Abstract— On the basis of the steady-state accumulation of divinyl (DV) or monovinyl (MV) protochlorophyllide (Pchlide) a in darkness (D) or in the light (L), green plants have been classified into three different greening groups namely dark divinyl-light divinyl (DDV-LDV), dark monovinyl-light divinyl (DMV-LDV) and dark monovinyl-light monovinyl (DMV-LMV) (Ionannides et al., Biochem. Syst. Ecol. 22, 211-220,1994). Interruption of the L phase of the photoperiod by a brief period of darkness (LD condition) revealed a predominance of different chlorophyll (Chl) a biosynthetic routes, depending upon the greening group affiliation of the plant species. For example, in DMV-LDV and DMV-LMV plants, the predominant Chl a biosynthetic routes under the LD condition appear to be the MV Chi a biosynthetic route and/or a mixed DV-MV Chi a biosynthetic route that bifurcates at the level of DV Pchlide a. On the basis of DV and MV Pchlide a accumulation rates after re-darkening, this greening group is designated as a light-dark MV (LDMV) subgroup. In DDV-LDV plants, the predominant LD Chi a biosynthetic routes appear to be the DV Chi a biosynthetic route and/or a mixed DV-MV Chi a biosynthetic route that bifurcates at the level of DV Chlide a. This greening group is designated as a light-dark DV (LDDV) subgroup. It is proposed that upon inhibiting the conversion of Pchlide a to Chi a by interruption of the L phase of the photoperiod by a brief period of D, the rates of DV and MV Pchlide a regeneration may reflect the carryover rates of DV and MV Pchlide a biosynthesis in L instead of reflecting a differential use of DV and MV carboxylic biosynthetic rates in D. It is also shown that in LDMV plants, MV Chlide a and MV Chi a are formed without the participation of [4-vinyl] Chlide a reductase. On the basis of recently published evidence, it is also argued that Pchlide oxidoreductase-A (POR-A) may be active in LDDV plants, while POR-B may predominate in LDMV plant species. The evolutionary significance of the LDDV and LDMV greening subgroups is discussed.     

Extraction of uranium(VI) with non-plasticized and TBP-plasticized polyurethane foam sorbents loaded with dibenzoylmethane

Studies have shown that plots of the log of the distribution ratio versus pH for the distribution of uranium(VI) between non-plasticized and TBP-plasticized dibenzoylmethane-loaded polyurethane foams and dilute aqueous uranium(VI) solutions have a limiting slope of 0.6 at equilibrium pH values 4 and reach a maximum distribution constant at about pH 6.0. The results indicate that the extracted complex is a simple chelate, UO₂Me₂, where HMe denotes dibenzoylmethane. Plasticization of the foam with TBP has been found to significantly enhance the rate of extraction.     

The solvent extraction of iron from steel solutions with 2-hexylpyridine prior to the determination of trace elements

The distribution of iron(III) between aqueous hydrochloric acid and 0.1M 2-hexylpyridine in benzene was examined as a function of acid concentration in the aqueous solution, the metal concentration being kept constant, and as a function of increasing ferric chloride concentration at a constant acidity of hydrochloric acid. The distribution coefficient of Fe(III) (tracer) is dependent on the square of the 2-hexylpyridine concentration in the benzene phase. Negatively charged complexes of the type FeCl(2-)(5) may be the species extracted. The formation of a mixture of 1:1 and 1:2 complexes with 2-hexylpyridine is indicated. Salting-out effects of a number of salts have been investigated. Separation factors of several metal ions relative to iron(III) in 7M hydrochloric acid are also reported. The results indicate that iron(III) can be selectively separated from a large number of elements, and the method has been utilized for the preconcentration of non-ferrous metal ions in mild steels by selective separation of iron, before their subsequent determination by emission spectrometry.