dc and ac characterizations of electrical conducting nanoporous carbon structures based on resorcinol-formaldehyde

Structural, electrical and morphological properties of electrical conducting nanoporous carbon structures, prepared at different pyrolysis temperatures by sol–gel method, were investigated. The effect of the measurement temperature on the electrical properties of the obtained sample pyrolysed at 675 °C was studied. The imaginary and real parts of the sample impedance versus frequency, in the range of 40 Hz–100 MHz, are investigated. The Nyquist diagrams were used to identify an equivalent circuit and the fundamental parameters of the circuit are determined at different temperatures with the aim to study the contributions of the grains and boundary grains to the conductivity.     

D3→FJ emission of Tb doped sol–gel silica

Amorphous silica samples doped with 0.1 and 1 mol% of terbium (Tb) were synthesized by the sol–gel method. In addition to the green light associated with ⁵D₄→⁷F_J transitions of Tb³⁺, the sample containing 0.1 mol% also emitted blue light as a result of ⁵D₃→⁷F_J transitions during photoluminescence (PL) measurements. As a result of concentration quenching this blue emission was not observed for the samples doped with the higher concentration (1 mol%). However the blue ⁵D₃ →⁷F_J emission was observed in the 1 mol% doped samples during cathodoluminescence (CL) measurements. Since a rough calculation indicated that the excitation rate in the CL system where the blue emission is observed may be similar to a laser PL system under conditions where the blue emission is not observed, the difference is attributed to the nature of the excitation sources. It is suggested that during the CL excitation incident electrons can reduce non-luminescent Tb⁴⁺ ions in the silica, substituting for Si⁴⁺ ions, to the excited (Tb³⁺)? state and that these are responsible for the blue emission, which does not occur during PL excitation.     

Effect of shape and interstice on surface enhanced Raman scattering (SERS) of molecules adsorbed on gold nanoparticles in the near‐dipole and quadrupole regions

Surface enhanced Raman scattering (SERS) of adsorbed molecule on colloidal gold nanoparticles of different shapes, namely nanospheres (NSs), nanorods (NRs), and nanoprisms (NPs) as well as the three NPs arrays of different interstice prepared by NS lithography, are studied with incident wavenumbers in the near‐dipole and near‐quadrpole regions of the nanoparticles. In the colloidal gold nanoparticles, the SERS enhancement is the largest for the sharp tip followed by the truncated tip NPs, then the NRs and least enhancement for the NSs. This decreasing order of enhancement occurs although the incident wavenumber was near the dipole resonance of NSs and the quadrupole resonance for the NPs. These varied enhancements are explained in part as due to the binding energies of the nanocrystal facets, but the larger contribution results from the plasmon electromagnetic fields. A parallel finite difference time domain (FDTD) calculations were carried out, which corporate the experimental results and show agreement with ratios of the SERS enhancement for the different shapes. The normalized SERS intensity for NPs of different interstice distances show a sharp rise with the decrease of the interstice distances because of interparticle dipolar and quadrupolar coupling as evidenced also by FDTD calculations. Furthermore, these calculations show that the enhancement is polarization independent for an incident wavelength near quadrupole resonance but polarization dependent for an incident wavelength near the plasmon dipole transition. In the last case, the enhancement is larger by an order of magnitude for a polarization parallel to the NPs bisector than for polarization normal to the bisector with no hot spots for the relatively large interstice dimensions used. Copyright © 2012 John Wiley & Sons, Ltd.     

Dual-channel spectral subtraction algorithms based speech enhancement dedicated to a bilateral cochlear implant

In this paper, two speech enhancement algorithms (SEAs) based on spectral subtraction (SS) principle have been evaluated for bilateral cochlear implant (BCI) users. Specifically, dual-channel noise power spectral estimation algorithm using power spectral densities (PSD) and cross power spectral density (CPSD) of the observed signals was studied. The enhanced speech signals were obtained using either Dual Channel Non Linear Spectral Subtraction ‘DC-NLSS’ or Dual-Channel Multi-Band Spectral Subtraction ‘DC-MBSS’ algorithms. For performance evaluation, some objective speech assessment tests relying on Perceptual Evaluation of Speech Quality (PESQ) score and speech Itakura-Saito (IS) distortion measurement were performed to fix the optimal number of frequency band needed in DC-MBSS algorithm. In order to evaluate the speech intelligibility, subjective listening tests were assessed with 50 normal hearing listeners using a specific BCI simulator and with three deafened BCI patients. Experimental results, obtained using French Lafon database corrupted by an additive babble noise at different Signal-to-Noise Ratios (SNR), showed that DC-MBSS algorithm improves speech understanding better than DC-NLSS algorithm for single and multiple interfering noise sources.     

Photo-physical and structural interactions between viologen phosphorus-based dendrimers and human serum albumin

This work deals with photo-physical and structural interactions between viologen phosphorus dendrimers and human serum albumin (HSA). Viologens are derivatives of 4,4′-bipyridinium salts. Aiming to rationalize the parameters governing such interactions eight types of these polycationic dendrimers in which the generation, the number of charges, the nature of the core and of the terminal groups vary from one to another, were designed and used. The influence of viologen-based dendrimers' on human serum albumin has been investigated. The photo-physical interactions of the two systems have been monitored by fluorescence quenching of free l-tryptophan and of HSA tryptophan residue. Additionally, using circular dichroism (CD) the effect of dendrimers on the secondary structure of albumin was measured. The obtained results show that viologen dendrimers interact with human serum albumin quenching its fluorescence either by collisional (dynamic) way or by forming complexes in a ground state (static quenching). In some cases the quenching is accompanied by changes of the secondary structure of HSA.     

Study of the critical current density and the thermodynamic critical field in deuterated κ-(BEDT-TTF)2Cu[N(CN)2]Br organic superconductor

ABSTRACT

We have studied the reversible and irreversible part of the hysteresis loops as a function of slow cooling rate through the order–disorder transformation near 80?K for the deuterated (κ-D₈-Br) κ-(BEDT-TTF)₂Cu[N(CN)₂]Br organic superconductor. We estimated the critical current density J_C and the thermodynamic critical field H_C from the magnetic hysteresis loops. Temperature dependence of the critical current density derived from the irreversible part using Bean’s model. The thermodynamic critical field H_C has been obtained from the reversible part of the hysteresis loops.     

Structural study of NiXMg1–XFe2O4 ferrites

The ferrite system Ni _x Mg_1-x Fe₂O₄ with 0≤x≤1 was prepared using the usual ceramic technique. The prepared samples were studied by X-ray diffraction and IR spectroscopy. X-ray diffraction analysis proved that all the samples were single-phase with the cubic spinel structure. The lattice constant, radius of the tetrahedral ion, unshared octahedral edge, tetrahedral bond and tetrahedral edge decrease while the bulk and theoretical densities, radius of octahedral ion, octahedral bond and shared octahedral edge increase as nickel ion substitution increases. The positions and intensities of the four bands of IR absorption spectra characterizing ferrites are composition dependent.     

Analysis of polycyclic aromatic hydrocarbons extracted from air particulate matter using a temperature programmable injector coupled to GC–C–IRMS†

Compound specific isotopic analysis (CSIA) can provide information about the origin of analysed compounds – in this case, polycyclic aromatic hydrocarbons (PAHs). In the study, PAHs were extracted from three dust samples: winter and summer filter dust and tunnel dust. The measurement was performed using the method validated in our laboratory using pure, solid compounds and EPA 610 reference assortment.

CSIA required an appropriate clean-up method to avoid an unresolved complex in the gas chromatographic analysis usually found in the chromatography of PAHs. Extensive sample clean-up for this particular matrix was found to be necessary to obtain good gas chromatography–combustion–isotope ratio mass spectrometry analysis results. The sample purification method included two steps in which the sample is cleaned up and the aliphatic and aromatic hydrocarbons are separated.

The concentration of PAHs in the measured samples was low; so a large volume injection technique (100 μl) was applied. The δ_VPDB ¹³C was measured with a final uncertainty smaller than 1 ‰. Comparison of the δ_VPDB ¹³C signatures of PAHs extracted from different dust samples was feasible with this method and, doing so, significant differences were observed.     

Kinetic parameters,collision rates,energy exchanges and transport coefficients of non-thermal electrons in premixed flames at sub-breakdown electric field strengths

The effects of an electric field on the collision rates, energy exchanges and transport properties of electrons in premixed flames are investigated via solutions to the Boltzmann kinetic equation. The case of high electric field strength, which results in high-energy, non-thermal electrons, is analysed in detail at sub-breakdown conditions. The rates of inelastic collisions and the energy exchange between electrons and neutrals in the reaction zone of the flame are characterised quantitatively. The analysis includes attachment, ionisation, impact dissociation, and vibrational and electronic excitation processes. Our results suggest that Townsend breakdown occurs for E/N = 140 Td. Vibrational excitation is the dominant process up to breakdown, despite important rates of electronic excitation of CO, CO₂ and N₂ as well as impact dissociation of O₂ being apparent from 50 Td onwards. Ohmic heating in the reaction zone is found to be negligible (less than 2% of peak heat release rate) up to breakdown field strengths for realistic electron densities equal to 10¹⁰ cm^?3. The observed trends are largely independent of equivalence ratio. In the non-thermal regime, electron transport coefficients are insensitive to mixture composition and approximately constant across the flame, but are highly dependent on the electric field strength. In the thermal limit, kinetic parameters and transport coefficients vary substantially across the flame due to the spatially inhomogeneous concentration of water vapour. A practical approach for identifying the plasma regime (thermal versus non-thermal) in studies of electric field effects on flames is proposed.     

Mode-competition noise associated with microwave modulation of multimode semiconductor lasers

We analyze the mode-competition (MC) phenomenon and the associated noise in multimode semiconductor lasers at microwave modulation. The study is based on the multimode rate-equation model, which takes into account the mechanisms of modal gain suppression. The MC is evaluated by the correlation coefficients between oscillating modes in the laser cavity. We show that an increase in the modulation depth changes the mode coupling from anticorrelation to positive correlation and then to complete coupling, which corresponds to emission of periodic pulses. The frequency spectra of relative intensity noise (RIN) exhibit sharp peaks at the modulation frequency and higher harmonics. The increase in the modulation depth is associated with suppression of the total and modal RIN under high-frequency modulation and with noise enhancement under low-frequency modulation.