Computation of triple differential cross-sections with the inclusion of exchange effects in atomic K-shell ionization by relativistic electrons for symmetric geometry

The triple differential cross-section for K-shell ionization of silver and copper atoms by relativistic electrons have been computed in the coplanar symmetric geometry with the inclusion of exchange effects following the multiple scattering theory of Das and Seal [1] multiplied by suitable spinors. Present computed results are marginally improved in some cases from the previous computed results [2]. Present results are compared with measured values [3] and with previous computation results [2]. Some other theoretical computational results are also presented here for comparison.      

Degradative chain transfer in vinyl acetate polymerizations using toluene as solvent

In this work, we propose that retardation in vinyl acetate polymerization rate in the presence of toluene is due to degradative chain transfer. The transfer constant to toluene (C_trs) determined using the Mayo method is equal to 3.8 × 10^?3, which is remarkably similar to the value calculated from the rate data, assuming degradative chain transfer (2.7 × 10^?3). Simulations, including chain‐length‐dependent termination, were carried out to compare our degradative chain transfer model with experimental results. The conversion–time profiles showed excellent agreement between experiment and simulation. Good agreement was found for the M_n data as a function of conversion. The experimental and simulation data strongly support the postulate that degradative chain transfer is the dominant kinetic mechanism. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3620–3625, 2007     

Searching for extensible Korobov rules

Extensible lattice sequences have been proposed and studied in [F.J. Hickernell, H.S. Hong, Computing multivariate normal probabilities using rank-1 lattice sequences, in: G.H. Golub, S.H. Lui, F.T. Luk, R.J. Plemmons (Eds.), Proceedings of the Workshop on Scientific Computing (Hong Kong), Singapore, Springer, Berlin, 1997, pp. 209–215; F.J. Hickernell, H.S. Hong, P. L’Ecuyer, C. Lemieux, Extensible lattice sequences for quasi-Monte Carlo quadrature, SIAM J. Sci. Comput. 22 (2001) 1117–1138; F.J. Hickernell, H.Niederreiter, The existence of good extensible rank-1 lattices, J. Complexity 19 (2003) 286–300]. For the special case of extensible Korobov sequences, parameters can be found in [F.J. Hickernell, H.S. Hong, P. L’Ecuyer, C.Lemieux, Extensible lattice sequences for quasi-Monte Carlo quadrature, SIAM J. Sci. Comput. 22 (2001) 1117–1138]. The searches made to obtain these parameters were based on quality measures that look at several projections of the lattice. Because it is often the case in practice that low-dimensional projections are very important, it is of interest to find parameters for these sequences based on measures that look more closely at these projections. In this paper, we prove the existence of “good” extensible Korobov rules with respect to a quality measure that considers two-dimensional projections. We also report results of experiments made on different problems where the newly obtained parameters compare favorably with those given in [F.J. Hickernell, H.S. Hong, P. L’Ecuyer, C. Lemieux, Extensible lattice sequences for quasi-Monte Carlo quadrature, SIAM J. Sci. Comput. 22 (2001) 1117–1138].     

Polarization locking and nonparaxial spatial solitons in media with electronic Kerr nonlinearity

The polarization structure of nonparaxial spatial solitons in a transparent medium with the electronic mechanism of Kerr nonlinearity is studied theoretically. It is demonstrated analytically in the weak nonparaxiality approximation that the regime of polarization locking, in which all the field components have the same propagation constant, is the only stable regime. Estimates of the rate of transition of the initial metastable regime of rotation of the polarization ellipse to the regime of polarization locking are presented. Based on a numerical solution of the nonlinear Maxwell equations, the presence of the nonparaxial regime of polarization locking is confirmed and the main characteristics of the corresponding spatial solitons are obtained.     

Structure and morphology of laser-ablated WO3 thin films

The structure and surface morphology of WO₃ thin films deposited by a laser-ablation technique have been found to be strongly dependent on the deposition conditions and the nature of the substrate. By precisely controlling the substrate temperature and the oxygen partial pressure, amorphous, polycrystalline, nano-crystalline and iso-epitaxial WO₃ thin films were successfully grown. The structure and surface morphological features of the films from X-ray diffraction and atomic force microscopy data are described in relation to the deposition conditions. PACS 81.15.Fg; 68.55.-a; 68.37.Ps     

Glass transitions and mixed phases in block SBS

Differential scanning calorimetry (DSC) does not allow for easy determination of the glass‐transition temperature (T_g) of the polystyrene (PS) block in styrene–butadiene–styrene (SBS) block copolymers. Modulated DSC (MDSC), which deconvolutes the standard DSC signal into reversing and nonreversing signals, was used to determine the (T_g) of both the polybutadiene (PB) and PS blocks in SBS. The T_g of the PB block was sharp, at ?92 °C, but that for the PS blocks was extremely broad, from ?60 to 125 °C with a maximum at 68 °C because of blending with PB. PS blocks were found only to exist in a mixed PS–PB phase. This concurred with the results from dynamic mechanical analysis. Annealing did not allow for a segregation of the PS blocks into a pure phase, but allowed for the segregation of the mixed phase into two mixed phases, one that was PB‐rich and the other that was PS‐rich. It is concluded that three phases coexist in SBS: PB, PB‐rich, and PS‐rich phases. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 276–279, 2005     

Optimization of in-vacuo template-stripped Pt surfaces via UHV STM

A recently demonstrated [1] in-vacuo template-stripping process is applied to the study of platinum films stripped from ultra-flat silicon-oxide surfaces. Template-stripped (TS) Pt surfaces, prepared with a range of post-deposition annealing times prior to being stripped from the templating surface in an ultra-high vacuum (UHV) environment, are examined by UHV scanning tunneling microscopy (STM). These studies reveal that without post-deposition annealing, TS Pt surfaces are largely made up of poorly-ordered, granular nanostructures undesirable for many applications. The post-deposition annealing treatments explored in the study result in the emergence and continuous growth of large smooth crystallites. Issues with crystallite orientation relative to the TS surface and artefacts arising as a result of the epoxy used in the template-stripping process are presented and discussed in relation to optimizing the template-stripping procedure for specific applications such as self-assembled monolayer (SAM) formation for molecular electronics. PACS 68.37.Ef; 68.47.De; 68.55.Jk; 81.05.Bx; 81.15.Ef     

Performance evaluation of fiber Bragg grating sensors by digital holographic technique, strain gauge measurement

In view of the growing interest for non-destructive tests of materials, geodynamical monitoring and in general remote sensing, there is a great effort to bring practical optical sensors from research labs to industrial and environmental applications. In this paper, we employ digital holographic technique as an efficient tool for evaluating the strain measurement capability of fiber Bragg gratings (FBG). A cantilever beam has been employed as a test structure under loading test. The strain measurements results obtained by fiber-based sensors have been compared to those obtained by using full-field digital holographic technique and point-wise strain gauge sensors glued on the same cantilever beam. A simple theoretical model is also presented to interpret and compare the experimental results coming from different techniques.     

Influence of organic modifiers on morphology and crystallization of poly(ϵ‐caprolactone)/synthetic clay intercalated nanocomposites

ε‐caprolactone was polymerized in the presence of neat montmorillonite or organomontmorillonites to obtain a variety of poly(ε‐caprolactone) (PCL)‐based systems loaded with 10 wt % of the silicates. The materials were thoroughly investigated by different X‐ray scattering techniques to determine factors affecting structure of the systems. For one of the nanocomposites it was found that varying the temperature in the range corresponding to crystallization of PCL causes reversible changes in the interlayer distance of the organoclay. Extensive experimental and literature studies on this phenomenon provided clues indicating that this effect might be a result of two‐dimensional ordering of PCL chains inside the galleries of the silicate. Small angle X‐ray scattering and wide angle X‐ray scattering investigation of filaments oriented above melting point of PCL revealed that polymer lamellae were oriented perpendicularly to particles of unmodified silicate, while in PCL/organoclay systems they were found parallel to clay tactoids. Calorimetric and microscopic studies shown that clay particles are effective nucleating agents. In the nanocomposites, PCL crystallized 20‐fold faster than in the neat polymer. The crystallization rate in nanocomposites was also significantly higher than in microcomposite. Further research provided an insight how the presence of the filler affects crystalline fraction and spherulitic structure of the polymer matrix in the investigated systems. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2350–2367, 2007     

Unified approach to photo-and electro-production of mesons with arbitrary spins

A new approach to identify the independent amplitudes along with their partial wave multipole expansions, for photo-and electro-production is suggested, which is generally applicable to mesons with arbitrary spin-parity. These amplitudes facilitate direct identification of different resonance contributions.