Application of High Pressure-DTA for High Pressure-liquid Phase Epitaxy of Doped Mercury and Thallium HTS Formations

The fabrication method of superconducting thin films of compositions HgBa₂Ca₂Cu₃O_8+δ (Hg-1223) and Tl₂Ba₂CuO_y (2201) on single-crystalline SrTiO₃ and LaAlO₃ substrates is reported. The highest obtained T _c was 134 K and J _c over 10⁶ A cm^–2 at 77 K. High pressure DTA(HP-DTA) was applied to grow mercury- and thallium-based high-temperature superconducting crystals and thin films, to identify melting points of particular phases within these oxide systems and determine suitable processing conditions. The DTA system operates at the: maximum temperature of 1200°C, volume up to 5 cm³, working pressure up to 1.5 GPa and at a working atmosphere — inert gas with up to 25% oxygen. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermal decomposition of rare earth element enanthates

The conditions of formation of Y, La and lanthanide (from Ce(III) to Lu) enanthates were worked out, their composition and their solubilities in water at 291 K were determined, and the conditions of their thermal decomposition were studied. They were prepared as crystalline solids with general formula Ln(C₇H₁₃O₂)₃·nH₂O, wheren=2–10. On heating, they decompose in two or three steps. They first lose some water molecules and then decompose to the oxides directly (salts of Y and heavy lanthanides) or via the intermediate formation of Ln₂O₂CO₃ (salts of La, Pr, Nd, Sm and Eu). Only yttrium enanthate dihydrate loses 2 water molecules on heating to form an anhydrous complex, which decomposes directly to Y₂O₃. The temperatures of dehydration are similar for all complexes (323–343 K), while the temperatures of oxide formation vary irregularly from 823 K for CeO₂ to 1078 K for La₂O₃.     

ResonanceRaman spectra of Iron(II) complexes with 4,4′-didodecyloxy-2,2′-bipyridine and 4,4′-dioctadecyloxy-2,2′-bipyridine

The resonanceRaman spectra of Fe(LC ₁₂)₃Cl₂ and Fe(LC ₁₈)₃Cl₂ (whereLC ₁₂ andLC ₁₈ denote 4,4′-didodecyloxy-2,2′-bipyridine and 4,4′-dioctadecyloxy-2,2′-bipyridine, respectively) have been measured along with their excitation profiles. The exciting lines of an Ar⁺ laser have been used. The bands appearing in theRR spectra within 1 200–1 600cm^?1 (expected to arise from thebipy moiety C-N and C-C vibrations) suffer the greatest resonance enhancements. Both depolarization ratios of theRaman bands and excitation profiles reveal the interaction of the resonant electronic states.     

Highly tilted antiferroelectric (R) enantiomers useful for the formulation of eutectic mixtures

ABSTRACT

Novel chiral three-ring (R) enantiomers were synthesised using optically active (R)-(?)-2-octanol. Properties, such as the sequence of phases, the transition temperatures and enthalpies, were tested by a polarising optical microscope and differential scanning calorimeter. An antiferroelectric smectic phase (SmC_A*) with a direct transition from the antiferroelectric to the isotropic phase (SmC_A*-Iso) was observed for three esters with an achiral C₃F₇CH₂O(CH₂)₃O– terminal chain. Bi- and multicomponent mixtures with a broad temperature range of the antiferroelectric phase and good electro-optical properties were formulated. Helical pitch of pure esters and mixtures was measured by spectrophotometry method.     

Adsorption of Some Essential Amino Acids on Hydroxyapatite

Samples of synthetic hydroxyapatite, Ca(10)(PO(4))(6)(OH)(2), obtained by wet method and calcined at 1173 K in air were used in an adsorption study of some essential amino acids, mainly histidine, methionine, and tryptophan. Adsorption isotherms were obtained using aqueous solutions of concentration range 2.7x10(-2)-1.3x10(-3) M at 303, 318, and 343 K, under near neutral conditions. The mode of adsorption was studied using IR spectroscopy. The results are discussed in terms of the dependence of the adsorption process both on the functional groups on the hydroxyapatite and on the solution chemistry of the aqueous amino acids solutions. Copyright 2001 Academic Press.     

Potentiodynamic and cyclic voltammetric behaviour of a lead electrode in NaOH solution

Summary The electrochemical behaviour of lead in NaOH solution was studied by potentiodynamic and cyclic voltammetric techniques in combination with X-ray diffraction analysis. The active dissolution of lead involves a small shoulderA1 followed by a peakA1 prior to a passive region. The shoulderA1 is assigned to the electroformation of a Pb(OH)₂ film, whereas peakA1 is due to the formation of PbO. Beyond the passive region, the current density increases again, forming a small shoulderA2 and a peakA2 prior to the oxygen evolution potential. The shoulderA2 and the peakA2 are correlated to the electrooxidation of PbO to Pb₃O₄ and PbO₂, respectively. The intensity of the anodic peaks increases with increasing alkali concentration, temperature and scan rate. In cyclic voltammetry, the reverse scan shows two cathodic peaksC1 andC2 which are correlated to the electroreduction of PbO and PbO₂ respectively, to Pb.

---

Potentiodynamisches und cyclovoltammetrisches Verhalten einer Bleielektrode in NaOH-Lösung

Zusammenfassung Das elektrochemische Verhalten von Blei in NaOH wurde mittels potentiodynamischer und cyclovoltammetrischer Techniken unter Zuhilfenahme der Röntgenbeugungsanalyse untersucht. Die aktive Auflösung von Blei verläuft über eine SchulterA1, die von einem einer passiven Region vorgelagerten PeakA1 gefolgt wird. Die SchulterA1 wird der elektrochemischen Bildung eines Pb(OH)₂-Films, der PeakA1 der Bildung von PbO zugeschrieben. Jenseits der passiven Region steigt die Stromdichte wieder an, und vor Erreichen des Sauerstoffpotentials treten eine kleine SchulterA2 und ein PeakA2 auf, die mit der Elektrooxidation von PbO zu Pb₃O₄ und PbO₂ korrelieren. Analog dazu beobachtet man in der cyclischen Voltammetrie zwei kathodische PeaksC1 undC2, die der Elektroreduktion von PbO und PbO₂ zu Pb entsprechen. Die Intensität der anodischen Peaks steigt mit steigender Alkalikonzentration, Temperatur und Scangeschwindigkeit.

     

Thin-Layer Chromatography with an Isolated Support and Forced Flow of the Mobile Phase

JPC – Journal of Planar Chromatography – Modern TLC -     

A facile synthesis of novel triazoloquinoxahnones and triazinoquinoxalinones

A series of 1-aryl-s-triazolo[4,3-a]quinoxalin-4-ones, 3 , were synthesized via the pyrolysis of the corresponding hydrazones, 6 . Thus, the cyclodehydrogenation occurred by refluxing them in an inert solvent (e.g. ethylene glycol) to give the triazoloquinoxalin-4-ones in a satisfactory yield. Using DMSO as a solvent for the above transformation afforded as a minor by-product an S-ylid. In contrast to earlier findings, annelation of a six-membered ring was successful and achieved through the pyrolysis of the pyruvate hydrazones derived of the quinoxalin-4-ones at ?230° to give the as-triazino[4,3-a]quinoxalin-5-ones, 4 . The reaction of 5 with acetylacetone afforded 3-(3′,5′-dimethylpyrazol-1-yl)-2(1H)-quinoxalinone, 10 . The structural assignments for the new compounds were based on their elemental analysis and spectroscopic data as well as an independent synthesis.     

Hygrometric Determination of Water Activities and Osmotic and Activity Coefficients of NH4Cl–LiCl–H2O at 25°C

The mixed aqueous electrolyte system of ammonium and lithium chlorides has been studied by the hygrometric method at 25°C. The relative humidities of this system are measured at total molalities from 0.3 to 6 mol-kg^{– 1} for different ionic-strength fractions y of NH₄Cl with y = 0.33, 0.50, and 0.67. The data obtained allow the deduction of new water activities and osmotic coefficients. The experimental results are compared with the predictions of the ECA (extended composed additivity) law proposed in our previous work. The Zdanovskii–Stokes–Robinson (ZSR), the Robinson–Stokes (RS), Reilly–Wood–Robinson (RWR), the Pitzer, and the Lietzke–Stoughton (LS II) models are also compared with our results. Predictions made using these models are, in general, consistent with our results. From these measurements, new Pitzer mixing ionic parameters are determined and used to predict the solute activity coefficients in the mixture for different ionic-strength fractions.