Fabrication of mesoporous ZnO nanosheets from precursor templates grown in aqueous solutions

Mesoporous ZnO nanosheets were successfully prepared by pyrolytic transformation of zinc carbonate hydroxide hydrate, Zn₄CO₃(OH)₆·H₂O. The nanosheets were initially formed as assemblies on glass substrates during chemical bath deposition (CBD) in aqueous solutions of urea and zinc acetate dihydrate, zinc chloride, zinc nitrate hexahydrate, or zinc sulfate heptahydrate at 80°C. It was key to induce heterogeneous nucleation of Zn₄CO₃(OH)₆·H₂O by promoting a gradual hydrolysis reaction of urea and controlling the degree of supersaturation of zinc hydroxide species. Morphology of Zn₄CO₃(OH)₆·H₂O was largely influenced by the anions present in the CBD solutions. The Zn₄CO₃(OH)₆·H₂O nanosheets were transformed into wurtzite ZnO by heating at 300°C in air without losing the microstructural feature.     

NMR Spectroscopic Observation of a Metal‐Free Acetylide Anion

A metal‐free acetylide was observed by using NMR spectroscopy. Metal‐free acetylides are closely related to reactive intermediates (carbanions) in solution; therefore, they have been regarded as unobservable species. However, we generated this highly reactive and unstable species through the deprotonation of phenylacetylene by using the strong nonmetallic phosphazene base tBu‐P4. In the presence of tBu‐P4, the J coupling between the ethynyl carbon and hydrogen nuclei (¹J_C,H) of phenylacetylene disappeared; this indicates the deprotonation of the alkyne terminal. Furthermore, a large low‐field shift (approximately 90 ppm) of the alkyne carbon resonance was observed. We concluded that we have observed a metal‐free carbanion with a formal charge on an sp‐hybridized carbon atom for the first time.     

Isolation,chemical characterization and structure of ansamitocin,a new antitumor ansamycin antibiotic

In this paper we report the isolation, chemical characterization and structural elucidation of Ansamitocin, a new antitumor antibiotic obtained from Nocardia No. C-15003 (N-1). Ansamitocin P-3, P-3' and P-4 with molecular formulae C₃₂H₄₃ClN₂O₉, C₃₂H₄₃ClN₂O₉ and C₃₃H₄₅ClN₂O₉, respectively, were identified as novel antibiotics. Their UV spectra resemble that of maytansine obtained from a plant source. Analysis of the PMR spectrum and spin-decoup studies of P-3 demonstrated that its skeletal structure was the same as that of maytansine. Reductive cleavage of each antibiotic gave maytansinol (P-0). Alkali hydrolysis of P-3, P-3' and P-4 gave isobutyric, butyric and isovaleric acids, respectively. P-3, P-3' and P-4 were concluded to be the isobutyrate, butyrate and isovalerate ester of maytansinol at C-3, respectively. An antitumor plant product, maytanacine, and its semisynthetic derivative, maytansinol propionate, were also produced by the same strain.     

KINETICS OF ENZYMATIC PHOTOREACTIVATION STUDIED WITH PHAGE T1 AND ESCHERZCHZA COLI Bs-1*

Abstract— The kinetics of enzymatic photoreactivation (PR) of u.v.-induced killing was compared among E. coli B_s-1, phage T1 in B_s-1 and phage T1 in irradiated B_s-1. The PR action spectrum showed no substantial difference between PR of B_s-1 and PR of T1 in B_s-1. The PR D₃₇ (i.e. the PR dose required to reactivate all but 37 per cent of the reactivable lethal lesions) was found to decrease linearly with decreasing U.V. dose whether U.V. was given to produce pyrimidine dimers in B_s-1 DNA, which then compete with irradiated T1 DNA for PR enzyme, or to B_s-1 or T1 DNA to produce dimers serving as substrate for the PR enzyme. A generalized Michaelis-Menten formula was used to analyze the data and the following conclusions were drawn. (1) The number of PR enzyme molecules per cell available for PR of T1 DNA inside the B_s-1 host is only a quarter of the number available for PR of the B_s-1 host itself. (2) The Michaelis constant K_m for reaction of host-DNA-damage and PR-enzyme becomes larger when the host damage acts as competitive inhibitor to PR of T1 DNA than when it is the substrate for PR enzyme. (3) PR enzyme retains almost all its initial catalytic efficiency even after about two-hundred rounds of catalytic functioning. Conclusions (1) and (2) suggest that PR enzyme is concentrated within the nuclear area surrounding the host DNA.     

Cover Picture

The cover picture shows a section of the electron charge density of the first metal carbide endohedral metallofullerene (Sc(2)C(2))@C(84) obtained from a synchrotron X-ray powder diffraction study by the maximum entropy method (MEM). The several density maxima, which correspond to scandium and carbon atoms, are clearly seen inside the C(84) carbon cage. The MEM charge density distribution also reveals that the C(84) cage has D(2d) symmetry (no. 23) and that the C(2) axis is parallel to the <100> face-centered cubic (fcc) direction of the unit cell. As a consequence of the site symmetry being 4mm, the C(2) axis of (Sc(2)C(2))@C(84) is oriented to six equivalent <100> directions and shows a merohedral disorder. The resultant Sc small middle dot small middle dot small middle dotSc distances and C-C bond lengths of the Sc(2)C(2) cluster are 0.429(2) and 0.142(6) nm, respectively. The observed C-C bond length is between that of a typical single and a double bond, and is very close to that of the C-C bond (0.143 nm) combining two pentagons in a C(60) molecule. More about this fascinating structure can be found in the contribution by Shinohara and co-workers on p. 397 ff.     

Copolyamides and copolyesters containing the phenoxasilin ring

Copolyamides and copolyesters containing the phenoxasilin ring were prepared from 2,8-dichloroformyl-10,10-diphenylphenoxasilin, isophthaloyl chloride and m-phenylenediamine or bisphenol A by interfacial polycondensation in chloroform-aqueous alkali mixture. They were obtained in yields of 80% or above and at relatively high viscosities up to 1.30 dl/g. The copolymers with high phenoxasilin content were freely soluble in dimethylacetamide, dimethylformamide and N-methyl-2-pyrrolidone, but decreasing phenoxasilin content led to copolymers with slight solubilities in these solvents; the copolyesters also dissolved in chloroform, m-cresol and phenol-sym tetrachloroethane (60:40 in wt%). Flexible transparent films were obtained from chloroform solutions of the copolyesters, but the films cast from DMF solutions of the copolyamides became brittle as the phenoxasilin content decreased. The phenoxasilin-containing copolymers hardly degraded below 400° and had good thermal stability. Introduction of the phenoxasilin ring into the polymer backbones by copolycondensation did not reduce thermal stability.     

Mechanical properties of fiber reinforced styrene-butadiene rubbers using surface-modified UHMWPE fibers under EB irradiation

Aiming to develop a high performance fiber reinforced rubber of SBR, a special technique using electron beam (EB) irradiation-induced graft-polymerization was applied to ultra-high molecular-weight polyethylene (UHMWPE) fibers. Although UHMWPE is chemically inert, N-vinyl formamide (NVF) could be graft-polymerized onto the UHMWPE fiber surface with this special technique. A maximum grafting percentage of 23.6% was achieved. The composite of SBR and grafted UHMWPE fibers with maximum grafting indicated a linear increase in the initial modulus and strength with the fiber content. At the fiber content of 10%, the initial modulus was improved about five times with respect to that of the pure SBR, while the strength was done about twice. At this moment, only a small reduction could be observed in the strain compared with that of pure SBR. The fiber reinforced rubber with a good performance was obtained in the system of SBR and grafted UHMWPE fibers.     

Reactions of sulfoxonium allylides with nitrile oxides and ring transformations of their reaction products

Reactions of allylides ($\text{1}$) with nitrile oxides ($\text{2}$) afforded furanylglyoxylate oxime ($\text{3}$) and 6H-l,2-oxazine ($\text{4}$). Ring transformations of $\text{3}$ and $\text{4}$ gave $\text{4}$ and pyrrolinone ($\text{6}$), respectively.     

Cationic polymerization of formaldehyde in liquid carbon dioxide. Part I

A cationic polymerization of formaldehyde which gave a high molecular weight polymer was studied in liquid carbon dioxide at 20–50°C. In the polymerization without any catalyst both the rate of polymerization and the molecular weight of the resulting polymer increased rapidly with a decrease in the loading density of the monomer solution to the reaction vessel, and also increased with an increase in the initial monomer concentration. From these results it was concluded that the initiating species could be ascribed to an impurity contained in the monomer solution. Both the rate of polymerization and the degree of polymerization of the polymer also increased with rising temperature. The carboxylic acid added acted as a catalyst in the polymerization because of increase in the polymer yield, the molecular weight of polymer formed, and the number of moles of polymer chain with increasing dissociation constant of acid used. It was concluded that the polymerization in liquid carbon dioxide proceeded by a cationic mechanism. Methyl formate had no influence on the polymerization, but methanol and water acted as a chain-transfer agent.